Project Information

Bid Title

Beasley Hall Renovation Addendum #2

Issuing Agency

Middle Tennessee State University

Location

Tennessee

Published Date

Apr 24, 2026

Closing Date

Apr 29, 2026

Government Level

State & Local

Status

Closed

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Submittal Deadline	Project	Project Description	Solicitor
Pre-Bid Conference: April 13, 2026 2:00p.m. MTSU Holmes Building conference room/teams 836 Champion Way Murfreesboro, TN 37132 Microsoft Teams meeting Join: https://teams.microsoft.com/meet/225764116996247?p=mZJAmO1lf0KcZ6tXC8 Meeting ID: 225 764 116 996 247 Passcode: JM6PU6Fi Need help? | System reference Dial in by phone +1 615-988-5047,,198379315# United States, Nashville Find a local number Phone conference ID: 198 379 315# For organizers: Meeting options | Reset dial-in PIN Bid Opening: April 29, 2026 2:00p.m. MTSU Holmes Building conference room 836 Champion Way Murfreesboro, TN 37132	Beasley Hall Renovation	This project is phase one of a two phase building renovation. In general, the renovation consists of the reconfiguration of restrooms & shower facilities, and the renovation of the main lobby. Pre-Bid Meeting Minutes Addendum #1 Addendum #2	Gilbert McLaughlin Casella, Michael W. Smith, msmith@gilmc.com

Attachment Preview

ADDENDUM

ADDENDUM No. 2

ISSUE DATE:

04.24.26

PROJECT:

MTSU Beasley Hall Renovations – Phase I

OWNER:

Middle Tennessee State University

ARCHITECT:

Gilbert McLaughlin Casella architects

GMCa JOB #: 202507 MBD

SBC #: 366/009-07-2025

323 Friendship Street

Murfreesboro, TN 37132

1301 East Main Street

Murfreesboro, TN 37132

2305 Kline Ave, Suite 200

Nashville, TN 37211

The original Contract Documents dated 03.06.26, and related addenda for the above-mentioned project are

hereby amended. The work reflected in this addendum is to be incorporated into the proposed Contract Sum and

Time as if originally issued.

This addendum consists of this 3 page summary outline and the following attachments (12 total pages):

1. Drawing - INDEX SHEET

2. Drawing – A0.1 – LIFE SAFETY DIAGRAMS

3. Drawing - AD1.1 – DEMOLITION FLOOR PLANS: BASEMENT & LEVEL 1

4. Drawing - AD6.1 – ENLARGED DEMOLITION PLANS

5. Drawing - A1.1 – FLOOR PLANS: BASEMENT & LEVEL 1

6. Drawing - A6.1 – ENLARGED PLANS

7. Drawing - ID1.0 LEVELS 1, 2, & 3 FLOOR PLANS

1. Drawing - ID2.0 ENLARGED FINISH PLANS & FLOORING PATTERN PLAN – LEVEL 1

8. Drawing - P0.2 – PLUMBING SCHEDULES

The Addendum is organized into the following three parts:

PART I:

PART II:

PART III:

CLARIFICATIONS

PROJECT MANUAL - REVISION SUMMARY

DRAWINGS - REVISION SUMMARY

PART I – CLARIFICATIONS:

1) The following are general clarifications:

a) None.

2) The following are responses to questions provided by bidders:

a) Question: Do the windows that are being infilled with Gyp need to have frosted film installed on them?

Response: On Level 1, the single-window in the existing bathroom and the right/left windows in the triple-

window combination unit already have panels or film on the windows. However, yes, we will need to add

film on the center-window of the triple-window combination unit. All the bathroom windows on Levels 2

& 3 are either already covered with existing panels/film or we have noted on the drawings for film to be

added. This has been formally added to the Drawings in this addendum.

b) Question: From B113 to vestibule B100E is labeled as B100E on a6.1 and as B113 on A1.1 – Clarify

Response: Your question doesn’t specifically mention “doors”, but we’re assuming you’re referencing the

Page 1 of 3

GILBERT | McLAUGHLIN | CASELLA architects, plc 2305 Kline Avenue Suite 200 Nashville TN 37211

615 322 9649 gilmc.com

labelling of the door between Lounge-B113 and Vestibule-B100E. This door should be labelled B113.

Sheet A1.1 is correct. Sheet A6.1 is incorrect. This has been formally corrected on the Drawings in this

addendum.

c) Question: Door B100E is an existing door with sidelight frame. Confirm the intent is to demo this door

and frame and replace with same. Response: Yes, this is correct.

d) Question: ID Note #20 says to provide shades at all windows. Architectural shows only shades being

added at Bedroom B109. Please clarify. Response: Specific Finish Note #20 on Sheet ID0.0 is not a

General Finish Note that applies to the entire building or all the scope of work areas. It is referencing

“ALL” the windows within Accessible Bedroom-B109 (two windows) because that note #20 is only

referenced for that room on the FINISH SCHEDULE under the “SPECIFIC NOTES” column.

e) Question: Bid form – item 4. Is the bidder to circle “roof bond not required” as there is no new roofing

work? Response: Yes, that would be acceptable.

f) Question: Bid form – item 5. Please indicate LD amount. Response: This information was provided in

Addendum #1 previously issued 04.22.26.

g) Question: Is there a survey that was performed for the flooring portion of phase 1. If so, can you share

that? Response: This report was previously noted as available on request. I have already distributed it to

many of you. But in case you haven’t received it, please download it using the following link…

https://gilmc.sharefile.com/share/getinfo/se660f3f455184b3c919b84bb19b0236a

Regarding the report itself, there do appear to be some minor areas impacted by this report. The existing

VCT flooring in Corridor-B127 just outside the Level 1 bathroom renovation area used asbestos

containing black mastic. The existing VCT flooring in the Level 3 Corridor just outside the Level 3

bathroom renovation area (labeled room #H300 in the report & B301 in the Construction Drawings)

used asbestos containing black mastic. The existing VCT flooring in these corridors is not scheduled to be

replaced as part of this project. However, there are small amounts of VCT that extend into the existing

doorways (between the door jambs) of the existing bathrooms that will need to be removed. One

additional item of note… there are a few room numbers in the report that differ from the room numbers

in the Construction Drawings. When referencing room numbers in the report, reference the labeled floor

plans at the end of the report for locations.

h) Question: As far as the bid bond, will a printed copy be accepted or do you need the actual hard copy

from surety? Response: We will need an original copy of the bid bond document as part of your bid

package, not just a printed copy.

i) Question: Please provide name and contact information for existing HVAC controls contractor for the

facility. Response: Siemens is the current HVAC Controls at Beasley Hall. Contact is Wilson Mitchum,

615-335-0068, wilson.mitchum@siemens.com.

PART II – PROJECT MANUAL – REVISION SUMMARY:

1. None

PART III – DRAWINGS – REVISION SUMMARY:

1. INDEX SHEET

a. Index tracking information was added to revised sheets.

2. A0.1 – LIFE SAFETY DIAGRAMS

a. On plan #1 - Level 1, changed label for Corridor-B103 to be Corridor-B113B (B103 was

already used at Bathroom-B103)

3. AD1.1 – DEMOLITION FLOOR PLANS: BASEMENT & LEVEL 1

4. AD6.1 – ENLARGED DEMOLITION PLANS

Page 2 of 3

GILBERT | McLAUGHLIN | CASELLA architects, plc 2305 Kline Avenue Suite 200 Nashville TN 37211

615 322 9649 gilmc.com

a. On plan #1 - Level 1 Demolition, changed label for Corridor-B103 to be Corridor-B113B

(B103 was already used at Bathroom-B103)

5. A1.1 – FLOOR PLANS: BASEMENT & LEVEL 1

a. On plan #1 - Level 1 Demolition, changed label for Corridor-B103 to be Corridor-B113B

(B103 was already used at Bathroom-B103)

6. A6.1 – ENLARGED PLANS

a. Plan #1 -Level 1

i. Changed label for Corridor-B103 to be Corridor-B113B (B103 was already used at

Bathroom-B103)

ii. Added film to one window unit in bathroom-B103.

iii. Corrected door label between Lounge-B113 and Vestibule-B100E to be B113 (not

B100E)

iv. Corrected door label between Lobby-B113A and Vestibule-B100 to be B100BB (not

B100AA)

7. ID1.0 LEVELS 1, 2, & 3 FLOOR PLANS

a. On Plans #1 & #3-Level 1, Corridor-B103 was relabeled Corridor-B113B (the bathrooms on

that floor were already labeled as B103).

8. ID2.0 ENLARGED FINISH PLANS & FLOORING PATTERN PLAN – LEVEL 1

a. On Plan #1-Level 1, Corridor-B103 was relabeled Corridor-B113B

b. On the Finish Schedule, Corridor-B103 was relabeled Corridor-B113B

9. P0.2 – PLUMBING SCHEDULES

a. In the Plumbing Fixture Schedule, the manufacturer & model number was revised for fixtures L1,

SH1, & SH2.

-End of Addendum Summary Outline-

Page 3 of 3

GILBERT | McLAUGHLIN | CASELLA architects, plc 2305 Kline Avenue Suite 200 Nashville TN 37211

615 322 9649 gilmc.com

SYMBOL REFERENCE LEGEND

EXTERIOR ELEVATION REFERENCE

X

X.X

SECTION REFERENCE

X

X.X

INTERIOR ELEVATION REFERENCE

X

X.XX

COLUMN REFERENCE

A

1

SPACE REFERENCE

NAME

XXX

DOOR REFERENCE

INTERIOR ELEVATION REFERENCE

WINDOW REFERENCE

ELEVATION REFERENCE

WALL PARTITION REFERENCE

REVISION REFERENCE

KEYNOTE REFERENCE

ORIENTATION REFERENCE

NORTH

ABBREVIATIONS

±

PLUS/MINUS

ABV.

A/C

A.C.T.

ADJ.

A.F.F.

ALT.

ALUM.

ANOD.

ARCH.

AUTO.

ABOVE

AIR CONDITIONING

ACOUSTICAL TILE

ADJACENT

ABOVE FINISHED FLOOR

ALTERNATE

ALUMINUM

ANODIZED

ARCHITECT(URAL)

AUTOMATIC

BD.

BLDG.

BLKG.

BLW.

B.M.

B.N.

B.0.

BRG.

B.S.

BTM.

B.W.

BOARD

BUILDING

BLOCKING

BELOW

BENCH MARK

BIDDING & NEGOTIATIONS

BY OTHERS

BEARING

BOTH SIDES

BOTTOM

BOTH WAYS

C.O.

CAB.

C.D.

C.I.P.

C.J.

CL.

℄

CLG.

CLR.

C.M.U.

C.O.

COL.

COMBO.

CONC.

CONST.

C.P.D.

CPT.

C.S.

C.T.

CONSTRUCTION ADMINISTRATION

CABINET

CONSTRUCTION DOCUMENTS

CAST IN PLACE

CONTROL JOINT

CLOSET

CENTERLINE

CEILING

CLEAR

CONCRETE MASONRY UNIT

CASED OPENING

COLUMN

COMBINATION

CONCRETE

CONSTRUCTION

CIVIL PROPOSED DRAWING

CARPET(ED)

CAST STONE

CERAMIC TILE

DBL.

D.D

DEM.

D.F.

DIA.

DIM.

DN.

DS.

DTL.

DTLS.

DWG.

DOUBLE

DESIGN DEVELOPMENT

DEMOLISH, DEMOLITION

DRINKING FOUNTAIN

DIAMETER

DIMENSION

DOWN

DOWNSPOUT

DETAIL

DETAILS

DRAWING

E.

E.F.

E.J.

ELEC.

EL.

ELEV.

EMER.

ENG.

EQ.

EQUIP.

ETR

EST.

ETC.

EXH.

EXIST.

EXT.

EAST

EACH FACE

EXPANSION JOINT

ELECTRIC(AL)

ELEVATION

ELEVATOR

EMERGENCY

ENGINEER

EQUAL

EQUIPMENT

EXISTING TO REMAIN

ESTIMATE

ECETERA

EXHAUST

EXISTING

EXTERIOR

F.B.O.

F.D.

F.E.

F.E.C.

F.F.E.

FIN.

FLR.

F.O.

F.O.F.

F.O.M.

F.O.S.

F.P.

FTG.

F.W.C.

FURNISHED BY OTHERS

FLOOR DRAIN

FIRE EXTINGUISHER

FIRE EXTINGUISHER CABINET

FINISHED FLOOR ELEVATION

FINISH

FLOOR(ING)

FINISHED OPENING

FACE OF FINISH

FACE OF MASONRY

FACE OF STUDS

FIRE PROTECTION

FOOTING

FABRIC WALL COVERING

GA.

GALV.

G.C.

G.F.

GLZ.

G.M.C.A.

GRT.

GVL.

GYP. BD.

GAGE, GUAGE

GALVANIZED

GENERAL CONTRACT(OR)

GROUND FACE

GLASS, GLAZING

GILBERT|McLAUGHLIN|CASELLA ARCHITECTS

GROUT

GRAVEL

GYPSUM BOARD

H.

H.B.

H.C.

HDR.

H.M.

HOR.

HR.

HT.

HTG.

H.V.A.D.

HWD.

HEIGHT

HOSE BIBB

HOLLOW CORE

HEADER

HOLLOW METAL

HORIZONTAL

HOUR

HEIGHT

HEATING

HEATING, VENTILATING & AIR CONDITIONING

HARDWOOD

I.D.

INFO.

INSUL.

INT.

INV.

INSIDE DIAMETER

INFORMATION

INSULATE(D/ION)

INTERIOR

INVERT

JAN.

J.O.

JST.

JT.

JANITORIAL

JOB OBSERVATION

JOIST

JOINT

KIT.

KITCHEN

L.

L.A.

LAM.

LAV.

L.H.

L.L.

LVR.

LENGTH

LANDSAPE ARCHITECT

LAMINATE(D)

LAVATORY

LEFT HAND

LOWER LEVEL

LOUVER

MAS.

MAX.

MECH.

MED.

KIT.

MIN.

MISC.

MLD.

M.O.

MTL.

MULL.

MASONRY

MAXIMUM

MECHANICAL

MEDIUM

MANUFACTUR(ER)

MINIMUM

MISCELLANEOUS

MOLDING, MOULDING

MASONRY OPENING

METAL

MULLION

N.

N.I.C.

NO.

NOM.

N.T.S.

NORTH

NOT IN CONTRACT

NUMBER

NOMINAL

NOT TO SCALE

O.C.

O.D.

OH.

OPNG.

OPP.

ON CENTER

OUTSIDE DIAMETER

OVERHEAD

OPENING

OPPOSITE

PART.

P.C.C.

PKG.

P.L.

PLUMB.

PLYWD.

PRE-FIN.

P.T.

PTD.

PVMT.

PARTITION

PRECAST CONCRETE

PARKING

PROPERTY LINE

PLUMBING

PLYWOOD

PRE-FINISHED

PRESSURE TREAT(ED), POST TENSIONED

PAINT(ED)

PAVEMENT

Q.T.

QUARRY TILE

RAD.

R.A.G.

R.B.

R.C.D.

R.L.

RE-INF.

REF.

REQ.

REV.

R.F.I.

RM.

R.O.

R.O.W.

R.T.

RADIUS

RETURN AIR GRILLE

RUBBER BASE

REFLECTED CEILING PLANS

ROOF DRAIN

RE-INFORCED

REFRIGERATOR

REQUIRED

REVISION(S), REVISED

REQUEST FOR INFORMATION

ROOM

ROUGH OPENING

RIGHT OF WAY

RUBBER TILE

S.

S.C.

SCHED.

S.D.

SECT.

SHT.

SIM.

SPEC.

S.S.

STD.

STO.

STRUCT.

SUS.

SYS.

SOUTH

SOLID CORE

SCHEDULE

STORM DRAIN, SCHEMATIC DESIGN

SECTION

SHEET

SIMILAR

SPECIFICATION

STAINLESS STEEL

STANDARD

STORAGE

STRUCTURAL

SUSPENDED

SYSTEM

TEL.

TELECOM.

T.B.D.

T&G

T.O.J.

T.P.

T.O.S.

T.O.W.

TV.

TYP.

TELEPHONE

TELECOMMUNICATIONS

TO BE DETERMINED

TONGUE AND GROOVE

TOP OF JOIST

TOILET PARTITION

TOP OF STEEL

TOP OF WALL

TELEVISION

TYPICAL

U.L.

U.N.O.

UTIL.

UPPER LEVEL

UNLESS NOTED OTHERWISE

UTILITY

V.C.T.

VEN.

VERT.

VEST.

VINYL COMPOSITION TILE

VENEER

VERTICAL

VESTIBULE

W.

W.C.

W.D.

W/D

W.G.

W.H.

WIN.

W.M.

W.T.W.

W.W.F.

W/

W/O

WEST, WIDTH, WIDE

WATER CLOSET, WATER COOLER

WOOD

WASHER/DRYER

WIRED GLASS

WATER HEATER

WINDOW

WIRE MESH

WALL TO WALL

WELDED WIRE FABRIC

WITH

WITHOUT

GENERAL NOTES

1) THE DESIGNER IS SOLELY RESPONSIBLE FOR THE DESIGN INTERPRETATION OF THE CONSTRUCTION DOCUMENTS.

2) UNLESS OTHERWISE PROVIDED IN THE CONTRACT DOCUMENTS, THE CONTRACTOR SHALL SECURE AND PAY FOR THE BUILDING PERMIT AND OTHER PERMITS

AND GOVERNMENTAL FEES, LICENSES AND INSPECTIONS NECESSARY FOR PROPER EXECUTION AND COMPLETION OF THE WORK. THESE ARE CUSTOMARILY

SECURED AFTER EXECUTION OF THE CONTRACT AND ARE LEGALLY REQUIRED WHEN BIDS ARE RECEIVED OR NEGOTIATIONS CONCLUDED. THE CONTRACTOR

SHALL COMPLY WITH AND GIVE NOTICES REQUIRED BY LAWS, ORDINANCES, RULES REGULATIONS AND LAWFUL ORDERS OF PUBLIC AUTHORITIES BEARING ON

PERFORMANCE OF THE WORK.

3) THE CONTRACTOR SHALL TAKE FIELD MEASUREMENTS AND VERIFY FIELD CONDITIONS AND SHALL CAREFULLY COMPARE SUCH FIELD MEASUREMENTS AND

CONDITIONS AND OTHER INFORMATION KNOWN TO THE CONTRACTOR WITH THE CONTRACT DOCUMENTS BEFORE COMMENCING ACTIVITIES. ERRORS,

INCONSISTENCIES OR OMISSIONS DISCOVERED SHALL BE REPORTED TO THE DESIGNER AT ONCE.

4) THE GENERAL CONTRACTOR SHALL SUPERVISE AND DIRECT THE WORK, USING THE CONTRACTOR'S BEST SKILL AND ATTENTION. THE CONTRACTOR SHALL BE

SOLELY RESPONSIBLE FOR AND HAVE CONTROL OVER CONSTRUCTION MEANS, METHODS, TECHNIQUES, SEQUENCES AND PROCEDURES; AND FOR

COORDINATING ALL PORTIONS OF THE WORK UNDER THE CONTRACT, UNLESS THE CONTRACT DOCUMENTS GIVE SPECIFIC INSTRUCTIONS CONCERNING

THESE MATTERS.

5) THE CONTRACTOR SHALL BE RESPONSIBLE TO THE OWNER FOR ACTS AND OMISSIONS OF THE CONTRACTOR'S EMPLOYEES, SUBCONTRACTORS AND THEIR

AGENTS AND EMPLOYEES, AND OTHER PERSONS PERFORMING PORTIONS OF THE WORK UNDER A CONTRACT WITH THE CONTRACTOR.

6) THE GENERAL CONTRACTOR SHALL COORDINATE THE LOCATION AND INSTALLATION OF BUILDING SYSTEMS AND EQUIPMENT AND VERIFY THAT REQUIRED

CLEARANCES FOR INSTALLATION AND MAINTENANCE OF THE EQUIPMENT AND ASSOCIATED WORK ARE PROVIDED. THIS INCLUDES BUT IS NOT LIMITED TO THE

FOLLOWING SYSTEMS: MECHANICAL, ELECTRICAL, LIGHTING, PLUMBING, AND TECHNOLOGY.

7) THE GENERAL CONTRACTOR SHALL COORDINATE WITH ALL BUILDING TRADES INVOLVED IN THE PROJECT FOR PREPARATION OF SHOP DRAWINGS TO INSURE

PROPER CLEARANCES FOR FIXTURES, DUCTS, CEILING, ETC. SO AS TO MAINTAIN THE SPECIFIED CEILING HEIGHT NOTED ON THE DRAWINGS. CLARIFY ANY

CONFLICTS WITH THE DESIGNER.

8) INSTALL ALL MANUFACTURED ITEMS, MATERIALS AND EQUIPMENT IN STRICT ACCORDANCE WITH MANUFACTURER'S RECOMMENDED SPECIFICATIONS, EXCEPT

WHERE THEY DIFFER FROM SPECIFICATIONS HEREIN. THE MORE STRINGENT SPECIFICATION SHALL BE THE BASIS FOR THE WORK. NOTIFY THE DESIGNER OF ANY

CONFLICTING RECOMMENDATIONS.

9) THE GENERAL CONTRACTOR SHALL SUBMIT PLANS FOR ALL FIXED FIRE PROTECTION EQUIPMENT SUCH AS STANDPIPES, SPRINKLER SYSTEMS, AND FIRE ALARM

SYSTEMS, AND HAVE THEM APPROVED BY GOVERNING REGULATORY AGENCIES BEFORE EQUIPMENT IS INSTALLED. SPRINKLER HEAD LOCATIONS ARE SHOWN IN

AREAS WITH FINISHED CEILINGS FOR COORDINATION PURPOSES ONLY. THE CONTRACTOR SHALL INCLUDE SUFFICIENT HEADS IN ALL SPACES TO PROVIDE 100%

COMPLETE COVERAGE OF ROOM (SPACE) DEFINED IN NFPA STANDARD 13. IN ROOMS WITH LAY-IN CEILING TILE SPRINKLER HEADS SHALL BE LOCATED IN THE

CENTER OF THE CEILING TILE UNLESS NOTED OTHERWISE.

10) DASHED-IN EQUIPMENT SHOWN AND NOTED SHALL BE FURNISHED BY THE OWNER: RECEIVED, STORED AND INSTALLED BY THE GENERAL CONTRACTOR.

EQUIPMENT NOTED AS "N.I.C." IS NOT IN THIS CONTRACT.

TERMINOLOGY:

1) "TYPICAL" OR "TYP." MEANS IDENTICAL FOR ALL CONDITIONS WHICH MATCH ORIGINAL CONDITION INDICATED, U.N.O.

2) "SIMILAR" OR "SIM." MEANS COMPARABLE CHARACTERISTICS FOR THE CONDITIONS NOTED. VERIFY DIMENSIONS AND ORIENTATION OF CONDITIONS WHICH

VARY FROM TYPICAL OR SIMILAR CONDITIONS INDICATED.

3) "ALIGN" MEANS ALIGNMENT OF SIMILAR COMPONENTS OF CONSTRUCTION, (WALLS, JAMBS, ETC.) WHICH ARE ADJACENT OR SHALL BE IN LINE WITH EACH

OTHER ACROSS VOIDS.

RATED PARTITIONS:

1) PARTITIONS WHICH EXTEND TO THE UNDERSIDE OF STRUCTURE SHALL BE TIGHTLY SEALED. THE INTEGRITY OF RATED PARTITIONS AND SMOKE PARTITIONS

SHALL BE MAINTAINED AT CORNERS AND AT INTERSECTIONS OF OTHER PARTITION TYPES. FILL ALL VOIDS AS DETAILED AND/ OR AS REQUIRED USING MATERIALS

APPROVED BY GOVERNING CODES. SMOKE AND RATED PARTITIONS SHALL CONTINUE TO INSIDE FACE OF EXTERIOR WALL AND SHALL BE SEALED COMPLETELY

ACCORDING TO GOVERNING CODES.

DIMENSIONS:

1) THE CONTRACTOR SHALL NOT SCALE THE DRAWINGS.

2) DIMENSIONS ARE NOT ADJUSTABLE UNLESS NOTED WITH A PLUS/MINUS TOLERANCE.

3) ALL FLOOR TO FLOOR AND CEILING HEIGHTS SHOWN ON DRAWINGS ARE FROM TOP OF FLOOR LINE UNLESS OTHERWISE NOTED "AFF" (ABOVE FINISH FLOOR)

4) DIMENSIONS ARE INDICATED AS FOLLOWS U.N.O.:

INTERIOR FRAMING: FROM FACE OF STUD TO FACE OF STUD

EXTERIOR WALLS: FROM EXTERIOR FACE OF WALL TO INTERIOR FACE OF STUD

DOORS:

1) DOORS SHALL BE LOCATED 6" FROM CLEAR OPENING TO ADJACENT WALL U.N.O.

2) THE CONTRACTOR SHALL UNDERCUT INTERIOR DOORS AS REQUIRED TO CLEAR FINISH FLOOR BY 1/4" U.N.O..

BLOCKING:

1) THE GENERAL CONTRACTOR SHALL PROVIDE WOOD BLOCKING AS REQUIRED ABOVE CEILINGS; AND IN PARTITIONS BEHIND WALL HUNG EQUIPMENT,

SHELVING, CABINETS, ETC. PROVIDE FIRE RETARDANT WOOD BLOCKING AT FIRE RATED WALL OR CEILING ASSEMBLY LOCATIONS.

CASEWORK:

1) CASEWORK DIMENSIONS SHALL BE FIELD VERIFIED BEFORE UNIT FABRICATION OR INSTALLATION.

GENERAL RENOVATION NOTES

1) EXISTING CONSTRUCTION (PARTITIONS, DOORS, PLUMBING FIXTURES, CASEWORK, EQUIPMENT, ETC.) IS INDICATED ON THE FLOOR PLANS, WITH LINES IN

A LIGHTER SHADE (SCREENED). NEW CONSTRUCTION IS INDICATED BY FULL INTENSITY (SOLID) LINES. REFER TO DEMOLITION DRAWINGS FOR EXISTING

CONSTRUCTION TO BE REMOVED.

2) THE GENERAL CONTRACTOR SHALL PROVIDE PROTECTIVE COVERING FOR CARPET, FURNISHINGS, FINISHES, AND COMMON AREAS IN EXISTING AREAS NOT

DESIGNATED FOR DEMOLITION OR NEW CONSTRUCTION. THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR THE REPAIR OF ANY DAMAGE CAUSED BY HIS

WORK OR ANY SUBCONTRACTOR.

3) THE GENERAL CONTRACTOR SHALL MEET WITH THE OWNER'S AUTHORIZED REPRESENTATIVE WELL IN ADVANCE OF CONSTRUCTION COMMENCEMENT TO:

a) SCHEDULE, SEQUENCE AND COORDINATE ALL WORK.

b) MAINTAIN EXITS AND EGRESS WIDTHS REQUIRED BY CODES DURING ALL PHASES OF CONSTRUCTION.

c) KEEP DISRUPTION OF THE FACILITY'S FUNCTIONS TO A MINIMUM DURING CONSTRUCTION.

4) THE GENERAL CONTRACTOR SHALL VERIFY THAT INSTALLATION OF NEW CEILINGS CAN BE INSTALLED IN EXISTING SPACES TO CLEAR DUCTWORK AND

OTHER CONSTRUCTED ITEMS AND MAINTAIN FLOOR TO CEILING HEIGHTS INDICATED ON DRAWINGS. IF DISCREPANCIES OCCUR DUE TO EXISTING

CONDITIONS, CONSULT WITH THE DESIGNER BEFORE PROCEEDING.

5) WHERE NEW CEILINGS MEET EXISTING CEILINGS, THEY SHALL MATCH THE EXISTING IN HEIGHT, PATTERN AND MATERIAL U.N.0. WHERE AN EXISTING SPACE

IS ENLARGED, ALIGN THE NEW CEILING GRID WITH EXISTING. IF EXISTING CEILING TILES CANNOT BE MATCHED IN COLOR OR TYPE, REPLACE EXISTING TILES IN

THAT SPACE WITH NEW TILES AS APPROVED BY THE DESIGNER.

6) THE FINISH FACE OF MATERIAL OF NEW PARTITIONS SHALL ALIGN ON BOTH SIDES OF THE PARTITIONS (FLUSH) WITH THE FACE OF MATERIALS ON EXISTING

COLUMNS OR PARTITIONS. U.N.O.

7) THE GENERAL CONTRACTOR SHALL VERIFY THAT THE CONSTRUCTION OF EXISTING FIRE ASSEMBLIES WITHIN AND REQUIRED BY THE SCOPE OF WORK,

(PARTITIONS, FLOORS, ROOF, DOORS AND FRAMES) MEET THE RATINGS DESIGNATED ON THE DRAWINGS. IF DISCREPANCIES ARE DISCOVERED, THE

CONTRACTOR SHALL MAKE ANY REPAIRS OR MODIFICATIONS NECESSARY TO ATTAIN THE PROPER RATINGS AND TO MEET LOCAL GOVERNING CODES.

8) THE INTEGRITY OF FIRE PROTECTIVE CONSTRUCTION SHALL BE MAINTAINED ON EXISTING COLUMNS, BEAMS AND FLOOR-CEILING ASSEMBLIES. PATCH ALL

FIREPROOFING REQUIRED AND SEAL PENETRATIONS TO MAINTAIN RATINGS.

9) THE GENERAL CONTRACTOR SHALL VERIFY DIMENSIONS OF AS-BUILT CONDITIONS, AND NOTIFY THE DESIGNER IN WRITING OF ANY DISCREPANCIES. ALL

INFORMATION SHOWN ON THE CONSTRUCTION DOCUMENTS IS BASED ON FIELD OBSERVATIONS AND/OR THE ORIGINAL CONSTRUCTION DOCUMENTS OF

THE FACILITY.

10) THE GENERAL CONTRACTOR SHALL SURVEY AND DETERMINE THE REMOVAL OF EXISTING CONSTRUCTION, EITHER WHOLE OR IN PART, AS REQUIRED FOR

THE INSTALLATION OF THE NEW MECHANICAL, PLUMBING AND ELECTRICAL WORK.

11) THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR CORRECTING DEFECTIVE WORK IN EXISTING CONSTRUCTION WITHIN THE LIMITS OF THE

CONSTRUCTION AREA. THIS INCLUDES, BUT IS NOT LIMITED TO, UNEVEN SURFACES AND FINISHES AT PLASTER OR GYPSUM BOARD. THE GENERAL

CONTRACTOR SHALL PATCH AND REPAIR SURFACES TO MATCH NEW ADJACENT SURFACES.

12) ALL ELECTRICAL PANELS, FIRE EXTINGUISHER CABINETS, ETC. LOCATED IN RATED PARTITIONS SHALL BE BACKED WITH APPROPRIATE MATERIALS TO RETAIN

APPLICABLE PARTITION FIRE RATING.

13) ALL PIPING ABOVE GRADE AND INSIDE THE BUILDING REQUIRED BY THE CONSTRUCTION DOCUMENTS SHALL BE INSTALLED IN AREAS WHERE IT WILL BE

CONCEALED. THE CONTRACTOR SHALL CONSULT WITH THE DESIGNER AND COORDINATE WITH OTHER TRADES TO PROVIDE FURRING FOR PIPING INSTALLED IN

FINISH AREAS.

14) REMOVE MECHANICAL, ELECTRICAL, AND PLUMBING FIXTURES AND CAP OR REMOVE EXISTING BRANCH LINES AS INDICATED IN THE MECHANICAL,

PLUMBING AND ELECTRICAL DOCUMENTS.

15) IN THE EVENT THE CONTRACTOR ENCOUNTERS ON THE SITE MATERIAL REASONABLY BELIEVED TO BE ASBESTOS, POLYCHLORINATED BIPHENYL (PCB) OR

OTHER TOXIC MATERIAL WHICH HAS NOT BEEN RENDERED HARMLESS, THE CONTRACTOR SHALL IMMEDIATELY STOP WORK IN THE AREA AFFECTED, SEAL THE AREA

IMPACTED FROM OCCUPIED SPACES, AND REPORT THE CONDITION TO THE OWNER IN WRITING.

16) EXISTING EQUIPMENT, STRUCTURE, PIPING, ETC. LOCATED ON PLANS SHOWN FOR POINTS OF REFERENCE ONLY. CONTRACTOR SHALL VERIFY ALL

EXISTING CONDITIONS BEFORE BEGINNING WORK. BEGINNING OF WORK SHALL SIGNIFY CONTRACTOR'S ACCEPTANCE OF EXISTING CONDITIONS.

17) IT SHALL BE THE CONTRACTORS RESPONSIBILITY TO SCHEDULE ALL DEMOLITION WORK WITH THE OWNER WELL IN ADVANCE. WORK SHALL BE PERFORMED

AT SUCH TIMES AND UNDER SUCH CONDITIONS AS SUITS THE OWNER.

18) THE CONTRACTOR SHALL VISIT THE JOB SITE PRIOR TO THE PRICING OF THIS PROJECT AND REVIEW ALL AREAS CONCERNED WITH THIS PROJECT.

19) PATCH HOLES LEFT IN WALLS AND FLOORS AFTER REMOVAL OF EXISTING DUCTWORK, PIPING CONDUIT, ETC. TO MATCH EXISTING CONSTRUCTION AND

FIRE RATING IN A LIKE NEW CONDITIONS.

20) FIRE SAFE ALL FLOOR PENETRATIONS. THIS INCLUDES EXISTING FLOOR PENETRATIONS THAT HAVE NOT BEEN PROPERLY SEALED.

SCOPE OF WORK DIAGRAM

NORTH

2ND & 3RD FLOOR (SIM.) DIAGRAM

SCALE: NOT TO SCALE

BUILDING DATA

CONSTRUCTION TYPE:

TYPE V-B, FULLY SPRINLERED

OCCUPANCY TYPE:

RESIDENTIAL (R-2)

EXISTING BUILDING AREA: *

388 SF - BASEMENT LEVEL

6,011 SF - LEVEL 1

6,003 SF - LEVEL 2

6,003 SF - LEVEL 3

18,405 SF TOTAL

BUILDING RENOVATIONS (MAJOR): *

0 SF - BASEMENT LEVEL

1,257 SF - LEVEL 1 (20.9% OF EXISTING FLOOR AREA)

701 SF - LEVEL 2 (11.7% OF EXISTING FLOOR AREA)

701 SF - LEVEL 3 (11.7% OF EXISTING FLOOR AREA)

2,659 SF TOTAL

* OVERALL BUILDING AREA CALCULATION TAKEN

FROM INTERIOR FACE OF EXTERIOR WALLS.

OCCUPANT COUNT:

LEVELS 1, 2, & 3 = 361 OCCUPANTS

(18,017 SF / 50 GROSS FOR DORMITORIES = 360.34)

BASEMENT LEVEL = 2 OCCUPANTS

(388 SF / 300 GROSS FOR MECH. = 1.29)

TOTAL = 363 OCCUPANTS

SEE A0.1 FOR LIFE SAFETY DIAGRAMS

EXISTING BUILDING HEIGHT:

+/- 32'-6" (UNCHANGED)

EXISTING NUMBER OF STORIES:

3 (UNCHANGED)

BUILDING ELEMENT FIRE-RESISTANT RATINGS:

0 HR: PRIMARY STRUCTURAL FRAME

0 HR: BEARING EXTERIOR

0 HR: BEARING INTERIOR WALLS

0 HR: NON-BEARING INTERIOR WALLS & PARTITION

0 HR: FLOOR CONSTRUCTION & RELATED MEMBERS

0 HR: ROOF CONSTRUCTION & RELATED MEMBERS

INTERIOR FINISH

RATING REQUIREMENTS:

INTERIOR EXIT STAIRS, RAMPS, & PASSAGEWAYS:

CLASS C

CORRIDORS & EXIST ACCESS STAIRS/RAMPS:

CLASS C

ROOMS/ENCLOSED SPACES:

CLASS C

FOR CLASS C:

FLAME SPREAD INDEX =76-200

SMOKE-DEVELOPED INDEX = 0-450

OTHER FIRE-RESISTANT RATINGS:

1 HR. FIRE BARRIER: SHAFTS - STAIRS (NONE MODIFIED)

1 HR. FIRE BARRIER: CORRIDORS - HORIZONTAL EXITS

(NONE MODIFIED)

1/2 HR. FIRE PARTITION: CORRIDORS - EGRESS

(NO RATED WALLS ARE BEING REMOVED OR

ADDED, ONLY PENETRATIONS ARE BEING

REMOVED OR ADDED )

THE EXISTING 1/2 HR. FIRE PARTITIONS ARE

CONSTRUCTED USING 4" CMU. WHERE

EXISTING DOORS ARE BEING REMOVED, THE

OPENINGS WILL BE IN-FILLED WITH 4” CMU TO

MATCH THE EXISTING WALL CONSTRUCTION.

PER IBC TABLE 722.2.1.1 - "MINIMUM

EQUIVALENT THICKNESS OF CAST-IN-PLACE OR

PRECAST CONCRETE WALLS, LOAD-BEARING OR

NONLOAD-BEARING", A CMU EQUIVALENCY OF

2.7” PROVIDES A 1-HR. FIRE-RATING. PER THE

CONCRETE MASONRY & HARDSCAPES

ASSOCIATION, A 4” CMU (HOLLOW UNIT USING

LIMESTONE AGGREGATE) HAS AN EQUIVALENCY

THICKNESS OF 2.7”. THIS IS TWICE THE

REQUIRED 1/2-HR. FIRE-RATING REQUIREMENT.

1/2 HR FIRE PARTITION: SLEEPING UNIT SEPARATIONS

AT WALLS, FLOORS, & CEILINGS (NONE

MODIFIED)

CLIMATE ZONE:

4A

PLUMBING FIXTURES:

FOR THE PURPOSES OF THE PLUMBING CALCS., A

COUNT OF 100 OCCUPANTS WAS USED BASED ON

THE ACTUAL DORMITORY CONDITIONS WHICH

INCLUDES 50 DOUBLE OCCUPANCY ROOMS

(2X50=100 OCCUPANTS).

WATER CLOSET CALCULATIONS: 1 PER 10 OCCUPANTS

REQUIRED = 10 (100/10=10)

EXISTING = 23

REMOVED = 21

ADDED = 20

PROVIDED = 22

LAVATORY CALCULATIONS: 1 PER 10 OCCUPANTS

REQUIRED = 10 (100/10=10)

EXISTING = 27

REMOVED = 25

ADDED = 17

PROVIDED = 19

SHOWER/BATH CALCULATIONS: 1 PER 8 OCCUPANTS

REQUIRED = 13 (100/8=12.5)

EXISTING = 17

REMOVED = 16

ADDED = 18

PROVIDED = 19

DRINKING FOUNTAIN CALCULATIONS: 1 PER 100 OCC.

REQUIRED = 2 (100/100=1, BUT 2 PER ADA, HI-LO)

EXISTING = 6

REMOVED = 0

PROVIDED = 6

SERVICE SINK CALCULATIONS: 1 PER BUILDING

REQUIRED = 1

EXISTING = 3

REMOVED = 0

PROVIDED = 3

SCOPE OF WORK STATEMENT:

ORIGINAL CONSTRUCTION DATE:

1957 (APPROXIMATELY)

HISTORIC BUILDING:

NO

OCCUPANCY & USE RISK CATEGORY (EXISTING): RISK CATEGORY II (PER 2021 IBC TABLE 1604.5)

OCCUPANCY & USE RISK CATEGORY (PROPOSED): SAME AS EXISTING, RISK CATEGORY II

(PER 2021 IBC TABLE 1604.5)

SEISMIC DESIGN CATEGORY:

C

SEISMIC BRACING:

REQUIRED FOR MODIFICATIONS TO EXISTING

SPRINKLER PIPING SYSTEMS PER THE SEISMIC DESIGN

CATEGORY LISTED ABOVE. SEE FIRE PROTECTION

SHEETS FOR SPECIFIC REQUIREMENTS.

IS PROPOSED USE A "PUBLIC BUILDING":

YES, SAME AS EXISTING

(PER TPBAA DEFINITION)

STATE AGENCY LICENSING:

NO

COMPLIANCE METHOD:

WORK CLASSIFICATIONS:

WORK AREA METHOD - LEVEL 2 (PER IEBC 301)

ALTERATION LEVELS 1 & 2 (PER IEBC 601)

SPECIAL INSPECTIONS REQUIRED:

NO

EXISTING FIRE PROTECTION SYSTEMS:

STANDPIPES:

YES

FIRE ALARM SYSTEMS:

YES

SMOKE ALARMS:

YES (IN AREA OF RENOVATION SCOPE OF WORK)

CARBON MONOXIDE ALARMS:

NOT APPLICABLE (NOT IN SCOPE OF WORK)

NORTH

1ST FLOOR DIAGRAM

SCALE: NOT TO SCALE

GOVERNING CODES

TENNESSEE STATE FIRE MARSHALL

2021

2021

2021

2021

2021

2021

2021

2021

2017

2010

IBC: INTERNATIONAL BUILDING CODE *

IFGC: INTERNATIONAL FUEL GAS CODE

IMC: INTERNATIONAL MECHANICAL CODE

IPC: INTERNATIONAL PLUMBING CODE

IPMC: INTERNATIONAL PROPERTY MAINTENANCE CODE

IFC: INTERNATIONAL FIRE CODE

IECC: INTERNATIONAL ENERGY CONSERVATION CODE *

IEBC: INTERNATIONAL EXISTING BUILDING CODE

NEC: NATIONAL ELECTRICAL CODE *

ADA STANDARDS FOR ACCESSIBLE DESIGN

* INCLUDING ALL MODIFICATIONS MADE BY STATE FIRE MARSHAL

PROJECT DESCRIPTION

THIS PROJECT INVOLVES THE RENOVATION TO THE BEASLEY HALL DORMITORY LOCATED ON THE CAMPUS OF MIDDLE TENNESSEE STATE

UNIVERSITY.

THIS PROJECT IS PHASE ONE OF A TWO PHASE BUILDING RENOVATION.

IN GENERAL, THE RENOVATION CONSISTS OF THE RECONFIGURATION OF BATHROOM & SHOWER FACILITIES, AND THE RENOVATION OF THE

MAIN LOBBY & LOUNGE AREAS ON LEVEL 1.

GOVERNING CODES - LOCAL

CITY OF MURFREESBORO

2018

2018

2018

2018

2018

2018

2018

2018

2017

2010

IBC: INTERNATIONAL BUILDING CODE *

IFGC: INTERNATIONAL FUEL GAS CODE

IMC: INTERNATIONAL MECHANICAL CODE

IPC: INTERNATIONAL PLUMBING CODE

IPMC: INTERNATIONAL PROPERTY MAINTENANCE CODE

IFC: INTERNATIONAL FIRE CODE

IECC: INTERNATIONAL ENERGY CONSERVATION CODE *

IEBC: INTERNATIONAL EXISTING BUILDING CODE

NEC: NATIONAL ELECTRICAL CODE *

ADA STANDARDS FOR ACCESSIBLE DESIGN

* INCLUDING ALL MODIFICATIONS MADE BY STATE FIRE MARSHAL

LOCAL FIRE DEPARTMENT

FIRE CHIEF: MARK McCLUSKEY

ADDRESS:

STATION 3

1511 DR. MARTIN LUTHER KING JR. BLVD.

MURFREESBORO, TN 37130

615.893.5210

EXISTING HAZARDOUS MATERIALS

REFER TO OWNER PROVIDED HAZARDOUS MATERIAL REPORT FOR AREAS

DETERMINED TO CONTAIN HAZARDOUS MATERIALS. SEE PROJECT

MANUAL FOR INFORMATION REGARDING ABATEMENT PROCESSES. ALL

HAZARDOUS MATERIALS TO BE ABATED PRIOR TO CONSTRUCTION.

PROJECT TEAM

OWNER

MIDDLE TENNESSEE STATE UNIVERSITY

CAMPUS PLANNING

836 CHAMPION WAY, SUITE 105

MURFREESBORO, TN 37132

615.898.2006

CONTACT:

JAMIE BREWER

jamie.brewer@MTSU.edu

EARL BOGLE

earl.bogle@MTSU.edu

ARCHITECTURE

GILBERT | MCLAUGHLIN | CASELLA ARCHITECTS, PLC

2305 KLINE AVENUE, SUITE 200

NASHVILLE, TN 37211

615.322.9649

CONTACT:

JEFF CASELLA

jcasella@gilmc.com

MIKE SMITH

msmith@gilmc.com

TREY CUNNINGHAM

tcunningham@gilmc.com

MECHANICAL, PLUMBING,

FIRE PROTECTION, & ELECTRICAL

TLC

12 CADILLAC DRIVE, SUITE 150

BRENTWOOD, TN 37027

615.297.4554

CONTACT (MECHANICAL):

TODD FOGELBERG

todd.fogelberg@tlc-eng.com

CONTACT (MECHANICAL):

RANDY CARTER

randy.carter@tlc-eng.com

CONTACT (PLUMBING/FIRE PROTECTION):

SVETLANA GRISHINA

svetlana.grishina@tlc-eng.com

CONTACT (ELECTRICAL):

ANDRE NGUYEN

andre.nguyen@tlc-eng.com

INTERIOR DESIGN

CASELLA INTERIORS

1500 4TH AVE N #103

NASHVILLE, TN 37208

615.255.2251

CONTACT:

LARET CASELLA

laret@casellainteriors.com

KATE SMITH

ksmith@casellainteriors.com

SHEET INDEX

INDEX LAST UPDATED 04.24.26

DRAWING

NUMBER

DRAWING DESCRIPTION

COVER/ COVER, APPLICABLE CODES, BUILDING DATA, INDEX,

INDEX GENERAL NOTES, PROJECT TEAM, VICINITY MAP

A0.1

AD1.1

AD1.2

AD6.1

A1.1

A1.2

A5.1

A6.1

A6.2

A6.3

A8.1

A9.1

ID0.0

ID1.0

ID2.0

ID2.1

M0.1

MD1.1

MD1.2

MD2.1

MD2.2

M1.1

M1.2

M2.1

M2.2

M3.1

M3.2

P0.1

P0.2

PD2.1

PD2.2

P2.1

P2.2

P3.1

P3.2

P4.1

P4.2

P5.1

P5.2

E0.1

E0.2

ED1.1

ED1.2

E1.1

E1.2

E2.1

E2.2

E3.1

E4.1

FP0.1

FPD2.1

FPD2.2

FP2.1

FP2.2

FP3.1

FP3.2

ARCHITECTURAL

LIFE SAFETY DIAGRAMS

DEMOLITION PLANS: BASEMENT & LEVEL 1

DEMOLITION PLANS: LEVELS 2 & 3

ENLARGED DEMOLITION PLANS

FLOOR PLANS: BASEMENT & LEVEL 1

FLOOR PLANS: LEVELS 2 & 3

DETAILS

ENLARGED PLANS

INTERIOR ELEVATIONS

INTERIOR ELEVATIONS

LEGENDS & SCHEDULES

REFLECTED CEILING PLANS

INTERIOR DESIGN

INTERIOR FINISH NOTES & LISTING

LEVELS 1, 2, & 3 FLOOR PLANS

ENLARGED FINISH PLAN & FLOORING PATTERN PLAN - LEVEL 1

ENLARGED FINISH PLANS - LEVELS 1, 2, & 3

MECHANICAL

MECHANICAL SYMBOLS, LEGEND, NOTES AND INDEX

LEVEL 1 DEMO - MECHANICAL

LEVELS 2 & 3 DEMO - MECHANICAL

ENLARGED DEMO PLANS - MECHANICAL

ENLARGED DEMO PLANS - MECHANICAL

OVERALL FLOOR PLANS - MECHANICAL

OVERALL FLOOR PLANS - MECHANICAL

ENLARGED PLANS - MECHANICAL

ENLARGED PLANS - MECHANICAL

MECHANICAL DETAILS

MECHANICAL DETAILS

PLUMBING

PLUMBING SYMBOLS, LEGEND, NOTES AND INDEX

PLUMBING SCHEDULES

ENLARGED DEMO PLANS - PLUMBING

ENLARGED DEMO PLANS - PLUMBING

ENLARGED PLANS - GRAVITY

ENLARGED PLANS - GRAVITY

ENLARGED PLANS - PRESSURE

ENLARGED PLANS - PRESSURE

RISER DIAGRAMS - GRAVITY

RISER DIAGRAMS - PRESSURE

PLUMBING - DETAILS

PLUMBING - DETAILS

ELECTRICAL

ELECTRICAL SYMBOLS, LEGENDS AND INDEX

ELECTRICAL GENERAL NOTES

LEVEL 1 DEMO - ELECTRICAL

LEVELS 2 & 3 DEMO - ELECTRICAL

OVERALL FLOOR PLANS - POWER & SYSTEMS

OVERALL FLOOR PLANS - POWER & SYSTEMS

OVERALL FLOOR PLANS - LIGHTING

OVERALL FLOOR PLANS - LIGHTING

PANEL SCHEDULES

ELECTRICAL DETAILS

FIRE PROTECTION

FIRE PROTECTION SYMBOLS, LEGEND, NOTES AND INDEX

ENLARGED DEMO PLANS - FIRE PROTECTION

ENLARGED DEMO PLANS - FIRE PROTECTION

ENLARGED PLANS - FIRE PROTECTION

ENLARGED PLANS - FIRE PROTECTION

FIRE PROTECTION DETAILS

FIRE PROTECTION DETAILS

SHEET

ISSUE

DATE

CURRENT REVISION DESCRIPTION

03/06/26 Addendum #2

03/06/26 Addendum #2

03/06/26 Addendum #2

03/06/26 - - -

03/06/26 Addendum #2

03/06/26 Addendum #2

03/06/26 Addendum #1

03/06/26 - - -

03/06/26 Addendum #2

03/06/26 - - -

03/06/26 - - -

03/06/26 Addendum #1

03/06/26 - - -

03/06/26 - - -

03/06/26 Addendum #2

03/06/26 Addendum #2

03/06/26 - - -

03/06/26 Addendum #1

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 Addendum #1

03/06/26 Addendum #1

03/06/26 Addendum #1

04/22/26 Addendum #1

03/06/26 Addendum #1

03/06/26 Addendum #2

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

04/22/26 Addendum #1

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 Addendum #1

03/06/26 Addendum #1

03/06/26 - - -

03/06/26 - - -

03/06/26 - - -

03/06/26 Addendum #1

03/06/26 Addendum #1

03/06/26 Addendum #1

03/06/26 - - -

03/06/26 Addendum #1

03/06/26 - - -

04/22/26 Addendum #1

04/22/26 Addendum #1

CURRENT

REVISION

DATE

04.24.26

04.24.26

04.24.26

---

04.24.26

04.24.26

04.22.26

---

04.24.26

---

---

04.22.26

---

---

04.24.26

04.24.26

---

04.22.26

---

---

---

---

---

---

04.22.26

04.22.26

04.22.26

04.22.26

04.22.26

04.24.26

---

---

---

---

---

---

---

---

---

04.22.26

---

---

---

---

---

04.22.26

04.22.26

---

---

---

04.22.26

04.22.26

04.22.26

---

04.22.26

---

04.22.26

04.22.26

VICINITY MAP

ISSUED:

SBC#:

GMCA #:

03.06.26

366/009-07-2025

202507.00 MBD

REVISED:

ADD-001 04.22.26 Addendum #1

ADD-002 04.24.26 Addendum #2

OLD FORT PKWY. (HWY 96)

SITE

COVER / INDEX

1

2

3

4

5

6

7

8

9

10

11

12

13

14

DN.

1

AD6.1

E

DN.

RAMP

D

DOUBLE

BEDROOM

B135

BATHROOM

B103

ACCESSIBLE

BEDROOM

B107

ACCESSIBLE

BEDROOM

B109

LOUNGE

B113

VESTIBULE

B100E

IT

CL.

B117A

STUDY

ROOM

B117

LAUNDRY

B119

CUSTODIAL

OFFICE

B121

STAIR 1

B100A

CL

B103A

ACCESSIBLE

BATHROOM

B105

MECH.

B111

C

KITCHEN/

VENDING

B115

TELE.

CL.

B119A

STAIR 2

B100B

JAN.

CLOS.

B121A

VESTIBULE

DN.

B101

CORRIDOR

B127

LOBBY

B113A

CORRIDOR

B113B

VESTIBULE

DN.

B100D

B

GUEST

TOILET

B102

BATH

B116N

HALL

B116G

LAUNDRY

B116E

CLOS.

B116D

CLOS.

B116C

DOUBLE

BEDROOM

B102

DOUBLE

BEDROOM

B104

DOUBLE

BEDROOM

B106

DOUBLE

BEDROOM

B108

DOUBLE

BEDROOM

B110

DOUBLE

BEDROOM

B112

VESTIBULE

B100

CLOS.

B116M

MASTER

BEDROOM

B116L

BEDROOM

B116K

CLOS.

B116H

KITCHEN

B116F

DINING

B116B

LIVINGROOM

B116A

A

DN.

DN.

RAMP

NORTH

DEMOLITION PLAN: LEVEL 1

1

SCALE: 1/8" = 1' - 0"

1

2

3

4

5

6

7

8

9

10

11

12

13

14

E

UP

D

SPRKLR.

CLOS.

B001

MECHANICAL

B002

C

CRAWLSPACE

B

A

NORTH

0

DEMOLITION PLAN: BASEMENT

SCALE: 1/8" = 1' - 0"

DEMOLITION KEYNOTES

1 LIMITS OF REMOVAL OF EXISTING FLOOR FINISH MATERIALS

2 FLOOR DRAIN TO BE REMOVED, SEE PLUMBING.

3 FLOOR DRAIN LOCATION TO BE RE-USED, SEE PLUMBING.

4 REMOVE WINDOW BLINDS.

5 COUNTERS & BACKSPLASHES TO BE REMOVED.

6 EXISTING WINDOW TO REMAIN

7 PLUMBING FIXTURES TO BE REMOVED, SEE PLUMBING.

8 TOILET PARTITIONS TO BE REMOVED.

9 SOLID SURFACE WINDOW STOOLS TO BE REMOVED.

10 PORTIONS OF EXISTING CEILINGS IN THESE ROOMS WILL NEED TO BE REMOVED AND

REPLACED FOR ACCESS TO NEW PLUMBING WORK AT FLOOR ABOVE. NO OTHER

DEMOLITION WORK IS EXPECTED IN THESE ROOMS UNLESS SPECIFICALLY NOTED

OTHERWISE.

11 DOOR & HOLLOW METAL FRAME TO BE REMOVED.

12 WALL TILE TO BE REMOVED FROM THE ENTIRE ROOM.

13 REMOVE ALL FLOOR FINISHES, BASES, WALL TILE (IF PRESENT), ACT CEILINGS, GYP. BD.

CEILINGS, SHELVING, MIRRORS, AND ACCESSORIES MOUNTED TO WALLS OR CEILINGS.

COORDINATE WITH OWNER IF ANY ACCESSORIES NEED TO BE SALVAGED FOR RE-USE.

PREP. FLOOR SURFACE FOR NEW FINISHES, TYP.

14 PAINTED METAL WINDOW SILL CAP TRIM TO BE REMOVED

15 GYP. BD. SOFFITS / BULKHEADS & RELATED FRAMING TO BE REMOVED

16 NOT USED

17 REMOVE ALL FLOOR, BASE, & CEILING FINISHES. PREP. FLOOR SURFACE FOR NEW

FINISHES, TYP.

18 NOT USED

19 DOOR AND FRAME TO REMAIN.

20 PORTION OF EXISTING WALL TO BE REMOVED.

21 CONCRETE COLUMN TO REMAIN.

22 EXTERIOR STONE SILL TO REMAIN.

23 EXTERIOR OR INTERIOR VESTIBULE DOORS (AND RELATED TRANSOMS & SIDELITES) TO

REMAIN.

24 NOT USED

25 INTERIOR WINDOW TO REMAIN.

26 COORDINATE THE REMOVAL OF EQUIPMENT / DUCTWORK IN THE BULKHEAD W/ MECH.

27 DOOR, FRAME & SIDE LITE TO BE REMOVED. OVERHEAD AUTOMATIC DOOR OPENER TO

BE SALVAGED FOR REUSE

28 SALVAGE ROOM SIGNAGE FOR RE-INSTALLATION, PATCH ANY WALL DAMAGE AS

REQUIRED.

29 REMOVE ROOM SIGNAGE, PATCH ANY WALL DAMAGE AS REQUIRED.

30 REMOVE ALL FLOOR & BASE FINISHES. REMOVED ACT TILES (GRID TO REMAIN).

PORTIONS OF THE ACT GRID MAY NEED TO BE TEMPORARILY REMOVED FOR PLUMBING.

INSTALLATIONS AT THE FLOOR ABOVE. PREP. FLOOR SURFACE FOR NEW FINISHES.

LEGEND

EXISTING WALLS TO REMAIN

WALLS OR ELEMENTS DESIGNATED TO BE REMOVED

ISSUED:

SBC#:

GMCA #:

03.06.26

366/009-07-2025

202507.00 MBD

REVISED:

ADD-002 04.24.26 Addendum #2

GENERAL NOTES

1. GENERAL DEMOLITION IS LIMITED TO LOUNGE-B113, LOBBY-B113A, CORRIDOR-B103,

BATHROOM-B103, CLOSET 103A, ACCESSIBLE BATHROOM-B105, ACCESSIBLE BEDROOM

B107, BATHROOM-B211, DOUBLE BEDROOM-B215, BATHROOM-B311, & DOUBLE

BEDROOM-B315. SEE PLAN FOR SPECIFIC ELEMENTS TO BE REMOVED.

2. PARTIAL CEILING DEMOLITION WILL NEED TO OCCUR AT VESTIBULE-B100E,

KITCHEN/VENDING-B115 & ACCESSIBLE BEDROOM-B109 TO ACCESS NEW PLUMBING

INSTALLATIONS BELOW THE FLOOR ABOVE.

3. SALVAGE ALL ROOM SIGNAGE AT DEMOLITION AREAS.

4. SEE MECH., PLUMB., & ELEC. DRAWINGS FOR ADDITIONAL DEMOLITION INFORMATION.

DEMOLITION PLANS: BASEMENT &

LEVEL 1

AD1.1

Commodity Codes

• NAICS 236220Commercial and Institutional Building Construction

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.