Project Information

Bid Title

Statewide Bridge Rehabilitation FY27-28

Issuing Agency

Ohio Facility Construction Commission

Location

Ohio

Published Date

Jun 13, 2026

Closing Date

Jul 1, 2026

Government Level

State & Local

Status

Closed

Ref. #

DNR-270110

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Publish Date	Due Date	Number	Owner	Contractring Authority	Project Name	Primary Service	Estimated Project Cost	Q&A	Short List	Notes
2026/06/12	2026/07/01	DNR-270110	Ohio Department of Natural Resources	Local Agency	Statewide Bridge Rehabilitation FY27-28	A/E	$2,448,000		TBD

Attachment Preview

Request for Qualifications (Registered Design Professional*)

State of Ohio Standard Forms and Documents

Administration of Project: Local Agency

Project Name Statewide Bridge Rehabilitation FY27-28

Project Location Statewide

City / County Various / Various

Owner

Ohio Department of Natural Resources

Delivery Method General Contracting

Publish Date 6/12/2026

Response Deadline 7/1/26

Project Number

DNR-270110

Project Manager

Gary Howard

Contracting Authority Local Agency

Prevailing Wages State

4:00 p.m. local time

No. of paper copies requested (stapled, not bound)

0

No. of electronic copies requested (PDF)

1

* “Registered Design Professional includes any architect holding a certificate issued under section 4703.10 of the Revised

Code, any landscape architect holding a certificate issued under section 4703.36 of the Revised Code, or any engineer

holding a certificate issued under section 4733.14 of the Revised Code.” (Ohio Building Code section 4101:1-2-01 Definitions)

Submit the requested number of Statements of Qualifications (Form F110-330) directly to The Division of Engineering at

engineering@dnr.ohio.gov. See Section J of this RFQ for additional submittal instructions.

Submit all questions regarding this RFQ in writing to engineering@dnr.ohio.gov with the project number included in the subject

line (no phone calls please). Questions will be answered and posted to the Opportunities page on the OFCC website at

http://ofcc.ohio.gov on a regular basis until one week before the response deadline. The name of the party submitting a

question will not be included on the Q&A document.

Project Overview

A. Project Description

As part of the Ohio Department of Natural Resources (ODNR) statewide bridge rehabilitation program, ODNR is requesting

professional engineering services to provide planning, design, and construction administration services for statewide bridge

improvement projects.

A summary of anticipated projects is provided below for reference.

SFN

Bridge

Number

Location

Land Owning Division

SFN 2626454

SFN 7326815

NA

Harrison State Park

Parks & Watercraft

Shawnee State Forest

Forestry

NA

Blackhand Gorge Nature Preserve Natural Areas/Preserves

ODOT

General

Appraisal

Rating

Estimated

Construction Cost

$

503,000

$

658,000

$

537,000

In addition to the projects listed above, the selected consultant will also support ODNR’s statewide small capital bridge

improvement program. This effort includes providing technical assistance, planning, design, and construction

administration for projects with an estimated combined construction cost of $500,000.00.

The consultant will further assist ODNR with its Orphan Bridge Program by performing assessments and preliminary

design for bridges on ODNR properties that are not included in the Ohio Department of Transportation’s statewide bridge

inventory.

As scope and associated costs are solidified, projects of similar types, scope and budget may be added or removed as

ODNR initiatives and funding allow.

While ODNR anticipates centralized services from the selected Consultant at the ODNR Fountain Square complex at

2045 Morse Road, Columbus, Ohio 43229, travel will be necessary to complete the services. For the purposes of scoring

proximity to project site, the ODNR Fountain Square complex will be considered the project site.

B. Scope of Services

F110-02-2026-JAN

Publish Date: 6/12/2026

Page 1 of 5

Request for Qualifications (Registered Design Professional) continued

The selected firms shall use ODOT and ODNR inspection reports and conduct site inspections to propose design

alternatives and develop a final design to bring the structures to an acceptable general appraisal rating.

All design and construction shall comply with the current editions of all applicable national, state, and local codes, as well

as accessibility standards, including ADA, ICC A117.1, and the ABA Outdoor Developed Areas Guidelines. The selected

firm shall apply for and obtain all necessary regulatory permits, maintain current estimates of probable construction costs

through the design phase, and provide construction administration services. Permitting and/or coordination with United

States Army Corps of Engineers (USACE), United States Fish and Wildlife Service (USFWS), ODNR Division of Wildlife,

Ohio Environmental Protection Agency (OEPA), State Historic Preservation Office (SHPO), and the local floodplain

administrators will be required. The selected firm will provide the engineering analysis and calculations needed to

advance the design, including structural, geotechnical, and hydraulics engineering.

The selected A/E firms should consider innovative structures or construction techniques for improved constructability and

to minimize permitting and environmental impacts.

The Ohio Department of Natural Resources Division of Engineering has developed a set of design guidelines for

construction projects. It is expected that all architects, engineers, consultants, and contractors will be familiar with these

design guidelines which will serve as the preference for all construction projects when developing final project

specifications. A complete set of current guidelines are available at https://ohiodnr.gov/business-and-industry/services-to-

business-industry/design-guidelines-all.

Relevant assessments and inspections reports will be provided only to shortlisted firms. Additional documentation will not

be provided during the initial RFQ phase of the selection process.

The selected A/E, as a portion of its required Scope of Services and prior to submitting its proposals, will discuss and

clarify with the Owner and/or the Contracting Authority, the cost breakdown of the Architect/Engineer Agreement detailed

cost components to address the Owner’s project requirements. Participate in the Encouraging Diversity, Growth& Equity

(EDGE) Program as required by statute and the Agreement.

As required by the Agreement, and as properly authorized, provide the following categories of services: Program

Verification, Schematic Design, Design Development, Construction Document Preparation, Bid and Award Support,

Conformed Documents, Construction Administration, Post-Construction, and Additional Services of all types.

Refer to the Ohio Facilities Construction Manual for additional information about the type and extent of services required

for each. A copy of the standard Agreement can be obtained at the OFCC website at https://ofcc.ohio.gov.

During the construction period, provide not less than 8 hours (excluding travel time) on-site construction administration

services each week, including (1) attendance at progress meetings, (2) a written field report of each site visit, (3) on-site

representation comprised of the A/E and its consultant staff involved in the primary design of the project, all having

relevant and appropriate types of construction administration experience.

For purposes of completing the Relevant Project Experience Matrix in Section F of the Statement of Qualifications (Form

F110-330), below is a list of relevant scope of work requirements for this RFQ:

1. Experience with bridge rehabilitation design and construction administration according to State and Federal

guidelines.

2. Experience with hydrologic, hydraulic, and flood routing analyses.

3. Experience with geotechnical analyses on similar types of projects.

4. Experience with structural analyses involving the integrity of concrete and masonry structures.

5. Experience with atypical bridge structures such as timber, stone, and masonry.

6. Experience with permitting in waterways and environmentally sensitive areas.

7. Experience with professional surveying for bridge projects.

8. Experience with cost estimating in current market conditions.

9. Experience with rehabilitation of historic/ NRHP eligible structures.

10. Experience with public construction and working with state and/or other governmental agencies.

C. Estimated Budget / Funding

State Funding:

$2,448,000.00

Other Funding:

$0.00

Construction Cost: $1,934,000.00

Total Project Cost: $2,448,000.00

D. Anticipated Schedule

Professional Services Start:

Construction Notice to Proceed:

Substantial Completion of all Work:

Professional Services Completed:

10 / 30

08 / 27

12 / 28

12 / 29

F110-02-2026-JAN

Publish Date: 6/12/2026

Page 2 of 5

Request for Qualifications (Registered Design Professional) continued

E. Estimated Basic Fee Range (see note below)

8% to 10%

F. EDGE Participation Goal

Percent of initial Total A/E Fee:

5.0%

NOTE: Basic Services include: (1) Program Verification, (2) Schematic Design, (3) Design Development, (4) Construction Documents,

(5) Bidding and Award OR GMP Proposal and Amendment (as applicable), (6) Construction Administration, and (7) Closeout services. The

Basic Fee includes all registered design professional services and consultant services necessary for proper completion of the Basic Services,

including validation of existing conditions (but not subsurface or hidden conditions) and preparation of cost estimates and design schedules for

the project. The Estimated Basic Fee Range is calculated as a percentage of the Estimated Budget for Construction Cost above,

including the Owner’s contingency. The Basic Fee excludes any Additional Services required for the project.

G. Basic Service Providers Required (see note below)

Lead A/E Discipline: Engineering

Secondary

Select Primary Discipline

Disciplines:

Civil Engineering

Structural Engineering

Surveying

H. Additional Service Providers Required

Field Testing/Laboratory Services

Environmental Permitting Services

Cultural Resources Services

Roadway Design

Enter Secondary Discipline

Enter Secondary Discipline

NOTE: The lead A/E shall be (1) any architect holding a certificate issued under section 4703.10 of the Revised Code, (2) any landscape

architect holding a certificate issued under section 4703.36 of the Revised Code, or (3) any engineer holding a certificate issued under section

4733.14 of the Revised Code.

I. Evaluation Criteria for Selection

• Demonstrated ability to meet Owner’s programmed project vision, scope, budget, and schedule on previous

projects.

• Previous experience compatible with the proposed project (e.g., type, size).

• Relevant past work of prospective firm’s proposed consultants.

• Past performance of prospective firm and its proposed consultants.

• Qualifications and experience of individuals directly involved with the project.

• Proposer’s previous experience (numbers of projects, sizes of projects) when working with its proposed

consultants.

• Specification writing credentials and experience.

• Experience and capabilities of creating or using Critical Path Method (CPM) schedules and of using CPM

schedules as a project management resource.

• Approach to and success of using partnering and Alternative Dispute Resolution.

• Proximity of prospective firms to the project site.

• Proposer’s apparent resources and capacity to meet the needs of this project.

• The selected A/E and all its consultants must have the capability to use the Internet within their normal business

location(s) during normal business hours.

Interested A/E firms are required to submit the Commitment to Participate in the EDGE Business Assistance Program

form in its Statement of Qualifications (Form F110-330) submitted in response to the RFQ, to indicate its intent to contract

with and use EDGE-certified Business(es), as a part of the A/E’s team. The Intent to Contract and to Perform and / or

waiver request letter and Demonstration of Good Faith Effort form(s) with complete documentation must be attached to

the A/E’s Technical Proposal. Both forms can be accessed via the OFCC website at https://ofcc.ohio.gov. The Intent to

Contract and to Perform form is again required at the Fee Proposal stage.

If the A/E firm intends to receive points for exceeding the EDGE Participation Goal, it must provide BOTH a

completed Commitment to Participate form AND a completed Statement of Intent to Contract and to Perform form

signed by both parties with its Statement of Qualifications.

For all Statements of Qualifications, please identify the EDGE-certified Business(es), by name, which will participate in the

delivery of the proposed professional services solicited in the RFQ.

F110-02-2026-JAN

Publish Date: 6/12/2026

Page 3 of 5

Request for Qualifications (Registered Design Professional) continued

Interested A/E firms must indicate on their Statement of Qualifications, the locations where their services will be

performed in the spaces provided or by attachment in accordance with the requirements of Executive Order 2019-12D

related to providing services only within the United States and the requirements of Executive Order 2022-02D prohibiting

purchases from or investment in any Russian institution or company. Failure to do so may cause their Statement of

Qualifications to be rejected.

J. Submittal Instructions

Firms are required to submit the current version of Statement of Qualifications (Form F110-330) available via the OFCC

website at https://ofcc.ohio.gov.

Electronic submittals, if requested, should be combined into one PDF file named with the project number listed on the

RFQ and your firm’s name, followed by “SOQ”. Use the “print” feature of Adobe Acrobat or similar software for creating a

PDF rather than using a scanner. If possible, please reduce the file size of the PDF. In Acrobat, go to Advanced, then

PDF Optimizer. Electronic submittals are limited to a maximum file size of 25 MB.

Paper copies of the Statement of Qualifications, if requested, should be stapled only. Do not use special bindings or

coverings of any type. Cover letters and transmittals are not necessary.

CD/DVD copies of the Statement of Qualifications, if requested, should have the sleeve labeled with the project number

and firm name, followed by “SOQ”.

Facsimile copies of the Statement of Qualifications will not be accepted.

Firms are requested to identify professional registrations, memberships and credentials including: LEED GA, LEED AP,

LEED AP+, CCCA, CCM, CCS, CDT, CPE, DBIA, and any other appropriate design and construction industry credentials.

Identify that information on the resume page for individual in Block 22, Section E of the F110-330 form.

F110-02-2026-JAN

Publish Date: 6/12/2026

Page 4 of 5

Registered Design Professional Selection Rating Form

State of Ohio Standard Forms and Documents

Project Name Statewide Bridge Rehabilitation FY27-28

Project Number

Proposer Firm

City, State, Zip

Selection Criteria

1. Primary Firm Location, Workload and Size (Maximum 10 points)

a. Proximity of firm to project site

b. Amount of fees awarded by Contracting Authority in

previous 24 months

c. Number of licensed professionals

Less than 50 miles

50 miles to 150 miles

More than 150 miles

Less than $500,000

$500,000 to $1,000,000

More than $1,000,000

Less than 5 professionals

5 to 10 professionals

More than 10 professionals

2. Primary Firm Qualifications (Maximum 30 points)

a. Project management lead

b. Project design lead

c. Technical staff

d. Construction administration staff

Experience / ability of project manager to

manage scope / budget / schedule / quality

Experience / creativity of project designer to

achieve owner’s vision and requirements

Experience / ability of technical staff to create

fully coordinated construction documents

Experience / ability of field representative to

identify and solve issues during construction

3. Key Consultant Qualifications (Maximum 20 points)

a. Key discipline leads

b. Proposed EDGE-certified Consultant participation*

Experience / ability of key consultants to

perform effectively and collaboratively

One point for every 2 percent increase in

professional services over the EDGE

participation goal

4. Overall Team Qualifications (Maximum 10 points)

a. Previous team collaboration

b. LEED** Registered / Certified project experience

c. BIM project experience

d. Team organization

Less than 4 sample projects

4 to 6 sample projects

More than 6 sample projects

Registered LEED v4.0 or v4.1 projects

Certified LEED v4.0 or v4.1 projects

Training and knowledge

Direct project experience

Clarity of responsibility / communication

demonstrated by table of organization

5. Overall Team Experience (Maximum 30 points)

a. Previous team performance

b. Experience with similar projects / delivery methods

c. Budget and schedule management

d. Knowledge of Ohio Capital Improvements process

Past performance as indicated by

evaluations and letters of reference

Less than 4 projects

4 to 6 projects

More than 6 projects

Performance in completing projects within

original construction budget and schedule

Less than 6 projects

6 to 8 projects

More than 8 projects

Value

Score

5

2

0

2

1

0

1

2

3

Max

=3

0 - 10

0-5

0 - 10

0-5

Max

= 20

0 - 15

0-5

1

2

3

Max

=3

1

Max

2

=2

1

Max

3

=3

0-2

0 - 10

0-3

4-6

7 - 10

0-5

0-1

2-3

4-5

* Must be comprised of registered professional design consulting firms and NOT the lead firm - For more

information on scoring this and other criteria refer to Document F199-01 - PS Selection Rating Rubric.

** Leadership in Energy & Environmental Design administered by Green Business Certification Inc.™

Notes:

Evaluator:

Name

Subtotal

Signature

Date

F110-02-2026-JAN

Publish Date: 6/12/2026

Page 5 of 5

Commodity Codes

• NAICS 237310Highway, Street, and Bridge Construction

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.