Project Information

Bid Title

DOC Mount Pleasant Correctional Facility Diesel Tanks Replacement & Spill Containment

Issuing Agency

State Government of Iowa

Location

Iowa

Published Date

Dec 8, 2025

Closing Date

Jan 19, 2026

Government Level

State & Local

Status

Closed

Ref. #

RFP950000-01

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Bid Information

Bid Number

RFP950000-01

Solicitation

DOC Mount Pleasant Correctional Facility Diesel Tanks Replacement & Spill Containment

Solicitation Type

Request for Proposals

County

Description

Description

The State of Iowa Department of Administrative Services (DAS) is seeking professional design services for the replacement of existing diesel tanks with new tanks with proper spill containment at the Mt. Pleasant Correctional Facility.

Agency Information

Number

005

Name

Administrative Services, Dept

Address 1

1305 E. Walnut St.

Address 2

City/State/Zip

Des Moines, IA 50319

Contact Information

Contact Name

Construction Procurement

Contact Title

Michael Bradbury

Contact Email

construction.procurement@iowa.gov

Contact Phone Number

(515) 823-9327

Contact Phone Extension

Contact Other Number

Contact Fax Number

Valid Dates

From

12/7/2025 4:00:00 PM

Until

1/19/2026 2:00:00 PM

Documents/Attachments

RFP950000-01 - MPCF Spill Containment for Diesel Tanks

12/5/2025 2:44:24 PM

Attachment Preview

RFP COVER SHEET

Administrative Information

STATE OF IOWA

REQUEST FOR PROPOSALS

PROFESSIONAL DESIGN SERVICES

RFP Number RFP950000-01

Title of RFP

DOC MPCF Diesel Tanks Replacement & Spill

Containment

Agency

Iowa Department of Administrative Services (DAS)

Project

Description

The State of Iowa Department of Administrative Services (DAS) is seeking professional

design services for the replacement of existing diesel tanks with new tanks with proper

spill containment at the Mt. Pleasant Correctional Facility.

State Issuing Officer:

Michael Bradbury

Issuing Officer

Iowa Department of Administrative Services

Hoover State Office Building, Level 3

1305 East Walnut, Des Moines, IA 50319-0105 Phone: 515-823-9327

Email: construction.procurement@iowa.gov

PROCUREMENT TIMETABLE—Event or Action

Date/Time (Central Time)

State Posts Notice of RFP on TSB website

12/05/25

State Issues RFP

12/09/25

Pre-Proposal Conference Location and Address:

Is Pre-Proposal Conference mandatory? No

If a map is needed, contact the Issuing Officer.

12/19/25 @ 10:30 AM at 1200

East Washington St. Mount

Pleasant, Iowa 52641 or on

Microsoft Teams below.

MEETING LINK

Meeting ID: 266 866 928 162 30

Passcode: 93cH3en9

Questions, requests for clarification, and suggested changes from

Respondents due to Construction Procurement

12/23/25 @ 3:00 PM

Proposals Due

01/19/25 @ 2:00 PM

Relevant Websites

Website where Addenda to this RFP will be posted http://bidopportunities.iowa.gov

Website where contract terms and conditions are posted

https://das.iowa.gov/sites/default/files/procurement/pdf/ConsensusDoc803.pdf

Number of Copies of Proposals Required to be Submitted: 1 Digital

Firm Proposal Terms

The minimum number of days following the deadline for submitting Proposals that the firm guarantees

all proposal terms, including price, will remain firm is 120 Days.

1.1 INTRODUCTION

The Iowa Department of Administrative Services (DAS) is seeking proposals from qualified and

available Design companies for services, per RFP cover page, and as outlined in the following

(Sections 1.2 - 1.3). The successful proposal must:

● For the staff that will be assigned, identify and describe qualifications, experience, and

expertise in providing services for similar, or relevant, projects.

● For the staff that will be assigned, provide a list of past similar or relevant projects

completed in the last 5 years, and include brief descriptions of what the projects entailed

and a contact name and phone number (reference). In addition provide estimated project

cost, final project cost at acceptance, and whether it was completed on time.

● Describe the composition of your team. Identify staff to be assigned. Provide resumes of key

individual(s)

including

education,

relevant

experience,

and

certifications/licensing. NOTE: Any responding company and/or consultant that is part of the

project design services cannot receive an award from the resulting request for bid of

construction services.

● Describe the cost estimating, status reporting, and cost reporting procedures you utilize.

● Describe computer program/software capabilities and expertise you utilize. Please describe

your experience.

● Provide a copy of your organizational chart.

● Describe your experience, if any, on designing similar or relevant projects for the State of

Iowa.

● Provide the hourly rates, and anticipated hours by position, for all persons (including sub-

consultants) that will be assigned to the project. Also provide an estimated fee total.

● Identify desired reimbursable charges (the State has limitations, per State of Iowa Accounting

Policies and Procedures 210.245), and all other charges.

1.2 SCHEDULE

DAS is seeking a firm that can commence work upon execution of a contract. Time is of the

essence.

Execution of Designer’s Contract

Tentative Design Kick-Off Meeting

100% Design Development Documents and Cost Opinion By

50% Construction Documents and Cost Opinion By

95% Construction Documents and Cost Opinion By

100% Construction Documents and Cost Opinion By

Contractor Bidding

Execution of Contractor’s Contract(s)

Submittals, Procurement and Construction

Week of January 26, 2026

Week of February 2, 2026

Design professional to propose

in RFP schedule

Design professional to propose

in RFP schedule

Design professional to propose

in RFP schedule

April 10, 2026

April to May 2026

May, 2026

May, 2026 to September, 2026

Close out

October, 2026 to November,

2026

1.3 PROJECT DESCRIPTION

Construction Manager (McGough Construction) has been engaged for this Project to serve as

advisor to DAS and to provide assistance in administrating the Contract for Design between DAS

and the Designer according to separate contract between DAS and Construction Manager. DAS is

currently seeking design services from qualified firms for a project consisting of replacing the

existing diesel tanks with new tanks with proper spill containment at the Mt. Pleasant Correctional

Facility.

Design services shall include:

1.3.1 The contract for this work will be a modified ConsensusDoc 803. See link on cover page

for a sample contract.

1.3.2

1.3.3

All design disciplines necessary to complete the scope of work.

Attend design kick-off meeting onsite to discuss desired outcome of the project with the

Owner, Construction Manager, and Owner’s maintenance staff.

1.3.4 Use of the State of Iowa‘s construction management software program for uploading all

documents, submitting and approving pay apps, and construction administration. The

cost for the use of the software is paid by the Owner.

1.3.5 The following design services will be needed:

1.3.5.1 Preparation of construction drawings and specifications that detail the

appropriate spill-containment measures for exterior, above-ground diesel

tanks. The drawings should reflect the replacement of the four existing single-

walled tanks with two 25,000-gallon double-walled tanks, along with all

necessary spill-containment features. The existing tanks supply three boilers

and a generator.

1.3.5.2 Development of drawings showing the routing and reconnection of the new

tanks to the existing fuel lines.

1.3.6 Field examination of the existing buildings.

1.3.7 Design for scope of work. Provide material recommendations based on experience,

quality, and price. Recommendations for replacements and upgrades shall include non-

proprietary equipment and systems.

1.3.8

1.3.9

Designer shall include any and all survey work required for completion of project.

Coordinate with State agencies to confirm utilities that may be abandoned as well as shut

down requirements where required.

1.3.10 Provide detailed input of design schedule to Construction Manager for overall

incorporation into master schedule.

1.3.11 Designer shall assist Construction Manager in the evaluation of long lead times.

1.3.12 Quality control during Design, Preconstruction and Construction.

1.3.13 Compliance with all Federal, State, and applicable AHJ codes.

1.3.14 Completion of State building and energy code documents, as required.

1.3.15 Design review will be conducted at 100% design development documents, 50%

construction documents, and 95% construction documents. Dates for design review

meetings to be coordinated with the design and project team and set no later than the

design kickoff meeting. Review will be conducted with DAS Owner Representative,

Construction Manager, and Facility Representative, at a minimum. Drawings,

specifications and cost opinions (if applicable) shall be provided at least five days prior to

each review meeting. An additional review meeting may be required at the end if there

are discrepancies in cost opinions or constructability review questions.

1.3.16 Review with the Department of Inspections, Appeals, and Licensing’s Building Code

Bureau for approval of plans or exemption from review. All fees associated with the

Bureau are the responsibility of the designer.

1.3.17 Develop and distribute agendas and meeting minutes for all meetings during the design

phase.

1.3.18 Designer shall provide any information necessary to obtain utility rebates where

applicable.

1.3.19 Construction cost opinions provided by the Design Professional team during Design (at

100% design development documents, 50% construction documents, and 95%

construction documents) with a Final Estimate for construction included with bid

documents, per Iowa Code.

1.3.20 Construction drawings, specifications (the Construction Manager will produce Divisions

00 and 01), and addenda.

1.3.21 Provide bid alternates as determined during the course of design and bid package

development.

1.3.22 Assist Owner and Construction Manager in obtaining bids from qualified contractors.

1.3.23 Construction administration, including creation of the submittal and closeout items log,

review of and responses to submittals and closeout documentation, RFIs, proposal

requests, change orders, pay applications, periodic site visits, attendance at project

meetings as required, participation / development of contractor punch list, closeout

documentation review and approval, certificates of substantial completion, and

certificates of final completion, as well as development of Architectural Supplemental

Instructions for design revisions, and punch lists within the construction management

software program.

1.3.24 Participation with project team during construction progress meetings as required.

Designer shall participate in bi-weekly conference calls during the construction period.

1.3.25 Field Observation reports, with photos, submitted for each site inspection within five (5)

days of the site visit.

1.3.26 Acknowledgement that all documents are copyright to the State of Iowa and shall be

turned over to the State of Iowa in their native computer format. Any ASIs/RFIs/PRs and

addendums will be expected to be incorporated before final posting. Both the native

computer format and PDF versions shall be uploaded to the construction management

software program at the end of the project.

1.3.27 The Department requests lump sum pricing from the respondents to this RFP, with the

lump sum base scope price being inclusive of all reimbursables, such as printing, mileage

and travel expenses. The Department requests the fee proposal from the respondents to

this RFP be broken down as follows. These breakdown prices will be used as the schedule

of values for billing purposes.

1.3.27.1 Design Development Documents

1.3.27.2 Construction Documents

1.3.27.3 Bidding or Negotiation Assistance

1.3.27.4 Construction Phase

Include at a minimum, eight (8) site visits. Design kick off/Building evaluation, 100%

design development document review meeting, 50% document review, Pre-bid meeting,

Pre-construction kickoff, Construction Field Observation (2), Substantial

completion/punch list development, Punch list/Final Completion approval, and one year

warranty correction period visit. Design Review at 50% construction document and 95%

construction document development will be conducted via conference call. Beyond these

site visits, each proposing firm shall provide additional visits as they see fit to complete

the work of design. In addition to the lump sum pricing, the Department requests a unit

price per construction inspection visit. This unit price will be additive or deductive based

on the number of actual visits made.

Commodity Codes

• NAICS 238990All Other Specialty Trade Contractors
• NAICS 541330Engineering Services

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.