Project Information

Bid Title

Spruce Creek Elementary - Replace 60 Ton Chiller

Issuing Agency

Volusia County Schools

Location

Florida

Published Date

Feb 19, 2026

Closing Date

Mar 11, 2026

Government Level

State & Local

Status

Closed

Ref. #

Project No. 2648251

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Spruce Creek Elementary - Replace 60 Ton Chiller - Project No. 2648251

Mandatory Prebid Meeting:	February 18, 2026 at 2:00 PM
Bid:	March 11, 2026 at 1:00 PM
Project Bid Documents:	Plans Project Manual Prebid Sign-in Sheets
Estimate:	$308,890
Consultant:	Kimley-Horn and Associates, Inc. Kevin Peterson (813) 553-3701
Owner:	VCS Project Manager Robert Larkin (386) 947-8786
Bid Status:	Active

Attachment Preview

VOLUSIA SPRUCE CREEK ELEMENTARY

COUNTY SCHOOLS

"LEADING WITH GRACE AND RESPECT"

REPLACE 60 TON CHILLER

THE SCHOOL BOARD OF VOLUSIA

COUNTY FLORIDA

200 North Clara Avenue

DeLand, Florida 32720

VCS Project NO. 2648251

642 TAYLOR RD, PORT ORANGE, FL 32127

SCHOOL BOARD

MEMBERS

RUBEN COLON

KRISTA GOODRICH

DONNA BROSEMER

JAMIE HAYNES

JESSIE THOMPSON

DR. CARMEN J. BALGOBIN

BOARD CHAIR

BOARD VICE CHAIR

BOARD MEMBER

BOARD MEMBER

BOARD MEMBER

SUPERINTENDENT

200 S. ORANGE AVENUE

SUITE 600

ORLANDO, FL 32801

PHONE: 407.898.1511

REGISTRY NO. 35106

2025 ©

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

DESCRIPTION OF WORK

REPLACE EXISTING 55 TON AIR-COOLED SCROLL CHILLER SERVING BUILDING 13 IN KIND WITH NEW 60 TON AIR-COOLED

CHILLER. UPDATE CONTROL COMPONENTS, SEQUENCES, AND GRAPHICS FOR NEW CHILLER.

Architect's Statement of Compliance

To the best of my knowledge, these drawings and the project manual are complete and comply with

the Florida Building Code.

ENGINEERS & CONSULTANTS

MECHANICAL

KIMLEY-HORN, AND ASSOCIATES, INC.

201 N FRANKLIN ST, SUITE 1400

TAMPA, FL 33602

(813) 556 - 6670

JEREMY DEMBOSKI

JEREMY.DEMBOSKI@KIMLEY-HORN.COM

WWW.KIMLEY-HORN.COM

ELECTRICAL

KIMLEY-HORN, AND ASSOCIATES, INC.

201 N FRANKLIN ST, SUITE 1400

TAMPA, FL 33602

(813) 635 - 5555

JIMMY NGUYEN

JIMMY.NGUYEN@KIMLEY-HORN.COM

WWW.KIMLEY-HORN.COM

LOCATION MAP

601289.

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

x

891.

9021.65

231.56

901.74

018.3

176.9

PROJECT LOCATION

2.3570

x

x

85190.4

07.9

NOT TO SCALE

PROJECT SHEET INDEX

SHEET NUMBER

Coordination

G001

COVER SHEET

SHEET NAME

ELECTRICAL

E000

E001

E100

E101

E501

ELECTRICAL SYMBOLS, ABBREVIATIONS, AND NOTES

ELECTRICAL SPECIFICATIONS

ELECTRICAL SITE PLAN

POWER PLAN

ELECTRICAL RISER DIAGRAMS & SCHEDULES

MECHANICAL

M000

M100

M101

M102

M501

M502

MECHANICAL SYMBOLS, ABBREVIATIONS, AND NOTES

SITE PLAN

MECHANICAL DEMO PLAN

MECHANICAL NEW PLAN

MECHANICAL PIPING DIAGRAMS AND DETAILS

MECHANICAL CONTROLS

CONSTRUCTION DOCUMENTS - 11/18/2025

ARCH/ENGR OF RECORD

JEREMY DEMBOSKI

PE 94304

DESIGNED BY

KJP

DRAWN BY

SRM

ISSUE DATE

11/18/2025

AE PROJECT NUMBER

145642001

SHEET TITLE

COVER SHEET

DRAWING NO.

G001

EQUIPMENT

SM

SHOA

MOTOR RATED SWITCH

MOTOR RATED HAND-OFF-AUTO SWITCH

EMERGENCY POWER OFF SWITCH, MUSHROOM TYPE

DISCONNECT, HEAVY DUTY, NON-FUSIBLE

DISCONNECT, HEAVY DUTY, FUSIBLE

MAGNETIC MOTOR STARTER

COMBINATION MOTOR STARTER & DISCONNECT

VFD

VARIABLE FREQUENCY DRIVE

WALL

WALL

T

ELECTRICAL PANEL, SURFACE MOUNTED

ELECTRICAL PANEL, FLUSH MOUNTED

TRANSFORMER

DP

DISTRIBUTION PANELBOARD

WALL

AC

WH-1 AC1

1

INVERTER

EQUIPMENT CALLOUT

WALL

AUDIO/VIDEO

S

AUXILIARY SYSTEM CABINET

AUDIO SPEAKER

MOUNTING

(UON)

FVM

TELECOMMUNICATION DEVICES

#

#

DATA OUTLET, DASH INDICATES 42" AFF

#

TELEPHONE OUTLET

#

#

WAP

DATA OUTLET, CEILING MOUNTED

DATA OUTLET, IN FLOOR BOX, REUSE DEMOLISHED AMF50 FLOOR BOX HOUSING WHEN

AVAILABLE. IF NOT, PURCHASE SAME OR EQUIVALENT.

WIRELESS ACCESS POINT (WAP)

CR

CARD READER

TELECOMMUNICATION DEVICE TYPE DESIGNATION LEGEND

X = TYPE, # = NUMBER OF DATA DROPS

E000

E001

E100

E101

E501

ELECTRICAL SHEET LIST

#

SHEET NAME

ELECTRICAL SYMBOLS, ABBREVIATIONS, AND NOTES

ELECTRICAL SPECIFICATIONS

ELECTRICAL SITE PLAN

POWER PLAN

ELECTRICAL RISER DIAGRAMS & SCHEDULES

Compliance Data

The following are the primary codes under which this project is

designed and permitted

CODE

APPLICABLE CODE BOOK AND YEAR

BUILDING CODE

ELECTRICAL

ENERGY

ACCESSIBILITY

2023 FBC Eighth Edition

2020 National Electrical Code

2023 FBC Energy Conservation Eighth Edition

2023 FBC - Chapter 11

FIRE ALARM

2023 Florida Fire Prevention Code, Eighth Edition

ELECTRICAL SYMBOLS

CONDUIT AND RACEWAY

CONDUIT RUN IN OR ON CEILING OR WALL.

CONDUIT RUN IN FLOOR, UNDER FLOOR, OR UNDERGROUND.

MARKS INDICATE QTY OF CONDUCTORS IN CONDUIT EXCLUDING GROUND. NO MARKS

INDICATE (2) CONDUCTORS. ADD GROUND PER NEC FOR EMT & NON-METALLIC CONDUIT.

LONG MARK INDICATES GROUND FOR ISOLATED GROUNDING SYSTEM. SIZE PER NEC.

BRANCH CIRCUIT (DIAGRAMMATIC)

LA-1

LA-[1,3,5]

ON HA-1

HOMERUN INDICATING PANEL AND CIRCUIT NUMBER.

HOMERUN WITH CIRCUIT NUMBER IN BRACKETS INDICATING MULTI-PHASE LOAD.

"ON" INDICATES CIRCUITING SPLIT AT DIFFERENT LOCATIONS

CONDUIT DOWN.

CONDUIT UP.

CONDUIT STUB AND CAP.

POWER DEVICES

DUPLEX CONVENIENCE OUTLET, +18" AFF (TYPICAL).

MOUNTING

(UON)

W, +18" AFF

DUPLEX CONVENIENCE OUTLET, COUNTER HEIGHT +42" AFF (TYPICAL).

W, FVMH

CONVENIENCE OUTLET W/ GFCI PROTECTION.

W, +18" AFF

WP

IG

MON

CONVENIENCE OUTLET W/ GFCI PROTECTION & WEATHER PROOF-IN-USE COVER.

DUPLEX CONVENIENCE OUTLET W/ DEDICATED CIRCUIT & ISOLATED GROUND.

DUPLEX CONVENIENCE OUTLET FOR MONITOR. COORDINATE WITH ARCH/OWNER.

DUPLEX CONVENIENCE OUTLET WITH INTEGRAL USB CHARGING PORTS.

W, +18" AFF

W, +18" AFF

W, +60" AFF

W, +18" AFF

EWC

REF

DISP

DUPLEX CONVENIENCE OUTLET FOR ELECTRIC WATER COOLER

DUPLEX CONVENIENCE OUTLET W/ DEDICATED CIRCUIT FOR REFRIGERATOR.

DUPLEX CONVENIENCE OUTLET W/ DEDICATED CIRCUIT FOR WASTE DISPOSAL.

DOUBLE DUPLEX CONVENIENCE OUTLET.

W, +30" AFF

W, +42" AFF

W, +18" AFF

W, +18" AFF

DUPLEX CONVENIENCE OUTLET, CEILING MOUNTED, FVMH.

C, FVMH

QUAD RECEPTACLE IN FLOOR BOX.

FL

DUPLEX RECEPTACLE IN FLOOR BOX.

FL

J USE

SPECIAL PURPOSE OUTLET, NEMA CONFIGURATION AND VOLTAGE AS NOTED.

JUNCTION BOX, SPECIFIC USE AS NOTED.

W, FVMH

W, FVMH

AC

AFF

ANSI

AWG

BLDG

CU

DIA

EX

EMT

ENT

ETC

IEEE

GEC

GFCI

kW

KVA

MC

MH

NEC

NEMA

NFPA

NORM

NTS

OCP

PH

PWR

PVC

SES

SPD

SWBD

TYP

UBC

UL

UON

UPS

W

XFMR

WP

ABBREVIATIONS

ARMORED CABLE

ABOVE FINISHED FLOOR

AMERICAN NATIONAL STANDARDS INSTITUTE

AMERICAN WIRE GAUGE

BUILDING

COPPER

DIAMETER

EXISTING TO REMAIN. PROVIDE WHITE TRIM FOR NON-WHITE TRIM DEVICES

ELECTRIC METAL TUBING

ELECTRIC NON-METALLIC TUBING

ETCETERA

INSTITUTE FOR ELECTRONIC AND ELECTRICAL ENGINEERS

GROUNDING ELECTRODE CONDUCTOR

GROUND FAULT CIRCUIT INTERRUPT

KILOWATT

KILOVOLT-AMPS

METAL CLAD

MOUNTING HEIGHT

NATIONAL ELECTRICAL CODE

NATIONAL ELECTRIC MANUFACTURERS ASSOCIATION

NATIONAL FIRE PROTECTION AGENCY

NORMAL

NOT TO SCALE

OVER CURRENT PROTECTION

PHASE

POWER

POLYVINYL CHLORIDE

SERVICE ENTRANCE SECTION

SURGE PROTECTION DEVICE

SWITCHBOARD

TYPICAL

UNIFORM BUILDING CODE

UNDERWRITERS LABORATORY

UNLESS NOTED OTHERWISE

UNINTERRUPTED POWER SUPPLY

WIRE

TRANSFORMER

WEATHER PROOF

GENERAL NEW NOTES:

A.

FURNISH ALL LABOR, MATERIALS, TOOLS, ACCESSORIES, ETC. REQUIRED FOR A COMPLETE WORKING

ELECTRICAL SYSTEM.

B.

ALL ELECTRICAL WORK SHALL COMPLY WITH ALL APPLICABLE STATE, COUNTY, AND LOCAL CODES AND

ORDINANCES, AS WELL AS ALL CURRENT STANDARDS, CODES AND PRACTICES AS REQUIRED BY NEC

2017, NEMA, ANSI, NFPA, UBC, UL, IEEE, AND UTILITY COMPANY STANDARDS.

C.

ALL EQUIPMENT, MATERIALS, AND WORK SHOWN ARE NEW UNLESS SPECIFICALLY NOTED AS EXISTING

OR NOTED OTHERWISE ON OTHER SHEETS.

D.

ANY POWER OUTAGE OF ANY CIRCUIT SHALL BE APPROVED BY THE OWNER IN WRITING A MINIMUM OF

TWO WEEKS PRIOR TO OUTAGE. ALL OUTAGES SHALL BE DONE EXACTLY WHEN DETERMINED BY THE

OWNER AND DONE BEFORE OR AFTER WORKING HOURS AND ON WEEKENDS. NO SINGLE OUTAGE SHALL

REQUIRE MORE THAN 4 HOURS. PROVIDE TEMPORARY POWER, HEAT AND COOLING AS REQUIRED

DURING OUTAGE.

E.

DUE TO THE REQUIREMENTS TO INTERFACE WITH EXISTING FACILITIES AND UTILITIES, IT IS REQUIRED

THAT THE CONTRACTOR VISIT THE SITE TO DETERMINE EXISTING CONDITIONS PRIOR TO BID.

F.

PRIOR TO PURCHASE OF ANY PANEL, PROTECTIVE DEVICES, SWITCH, STARTER, CONDUIT, WIRE, ETC., TO

FEED ANY PIECE OF MECHANICAL EQUIPMENT, VERIFY THE VOLTAGE, PHASE, AND LOAD OF THAT ITEM IN

THE FIELD AND/OR WITH THE PARTICULAR ENTITY INVOLVED IN FURNISHING THE ITEM SUCH THAT THE

PROPER SIZE & RATING OF THE MATERIALS ARE PURCHASED. NO EXTRAS WILL BE ALLOWED FOR

FAILURE TO COMPLY. THIS APPLIES TO ALL EQUIPMENT UNDER OTHER SECTIONS & BY THE OWNER.

G.

PULL ROPES: PROVIDE 300 POUND PULL WIRE OR NYLON EQUIVALENT IN ALL INTERIOR EMPTY CONDUIT

RUNS. PROVIDE 1/4" DIA NYLON PULL ROPE IN EACH EMPTY EXTERIOR CONDUIT OR DUCT.

H.

COORDINATE WITH MECHANICAL CONTRACTOR TO AVOID CONFLICTS BETWEEN DUCT WORK, SUPPLY &

EXHAUST DIFFUSERS, LIGHTING, SOUND SYSTEMS, AND FIRE ALARM SYSTEM FIXTURES.

I.

ELECTRICAL CONTRACTOR SHALL GUARANTEE THE ELECTRICAL WORK TO BE FREE FROM DEFECTS IN

MATERIALS AND WORKMANSHIP FOR A PERIOD OF TWO YEARS FROM DATE OF FINAL ACCEPTANCE.

J.

VERIFY THE EXACT LOCATION AND ELEVATION OF ALL ELECTRICAL EQUIPMENT PRIOR TO ROUGH-IN.

FINAL CONNECTIONS OF EQUIPMENT SHALL BE PER MANUFACTURERS APPROVED WIRING DIAGRAMS,

DETAILS, AND INSTRUCTIONS. THE ELECTRICAL CONTRACTOR SHALL PROVIDE MATERIALS AND

EQUIPMENT COMPATIBLE WITH EQUIPMENT ACTUALLY SUPPLIED.

NOTE: COORDINATE LUMINAIRE LOCATIONS WITH ARCHITECTURAL REFLECTED CEILING PLANS.

K.

ORDER AND/OR RELEASE ORDERED MATERIALS PROMPTLY AFTER SUBMITTAL APPROVAL. NO

SUBSTITUTIONS OR ALTERNATE METHODS OF INSTALLATION WILL BE ACCEPTED FOR FAILURE TO ORDER

MATERIALS IN A TIMELY FASHION.

L.

OBTAIN WRITTEN APPROVAL FROM THE ENGINEER OF ALL SHOP DRAWINGS AND MANUFACTURERS DATA

FOR PANEL BOARDS, TRANSFORMERS, WIRING DEVICES, ETC. BEFORE RELEASING ORDERED MATERIALS.

SUBMITTAL DATA SHALL INDICATE THAT THE CONTRACTOR HAS REVIEWED THE INFORMATION THEREIN

AND THAT THE PROPOSED EQUIPMENT WILL MEET THE PHYSICAL CONSTRAINTS AT THE JOB SITE. ANY

SUBSTITUTIONS SHALL BE OF THE EQUIVALENT OR BETTER QUALITY THAN THE SPECIFIED COMPONENTS.

M.

TYPE MC OR TYPE AC CABLE SHALL ONLY BE USED WITH THE SPECIFIC WRITTEN PERMISSION OF THE

PROGRAM/PROJECT MANAGER. ENT TYPE CONDUIT IS NOT ALLOWED.

N.

CONDUIT/CONDUCTOR RUNS SHOWN ARE DIAGRAMMATICAL ONLY. THE BEST FINAL CONDUIT ROUTING

SHALL BE AS DETERMINED BY THE ELECTRICAL CONTRACTOR AT THE TIME OF CONSTRUCTION.

O.

ALL WIRE SHALL BE COPPER. MINIMUM SIZE FOR POWER WIRING SHALL BE #10 AWG. STRANDED UNLESS

OTHERWISE NOTED. MINIMUM SIZE FOR CONTROL WIRING SHALL BE #14 AWG.

P.

PROVIDE ALL PANEL BOARDS WITH TYPED DIRECTORIES INSTALLED UNDER A CLEAR PLASTIC COVER.

SUBMIT DIRECTORY INFORMATION TO THE OWNER FOR APPROVAL PRIOR TO FINALIZATION.

Q.

SERIES RATING OF UPSTREAM OR DOWNSTREAM CIRCUIT BREAKERS OR FUSES IS PROHIBITED. ONLY

FULLY RATED SYSTEM COMPONENTS WILL BE ACCEPTED.

R.

ALL PANEL BOARDS, SWITCHES, MOTOR STARTERS, AND SWITCHBOARD CIRCUIT BREAKERS SHALL HAVE

ENGRAVED MICARTA NAMEPLATES.

S.

ALL CIRCUITS THAT SHARE A NEUTRAL SHALL BE PROVIDED WITH MULTIPOLE BREAKER.

200 S. ORANGE AVENUE

SUITE 600

ORLANDO, FL 32801

PHONE: 407.898.1511

REGISTRY NO. 35106

2025 ©

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

JIMMY NGUYEN

PE 91973

ARCH/ENGR OF RECORD

DESIGNED BY

JN

DRAWN BY

SRM

ISSUE DATE

11/18/2025

AE PROJECT NUMBER

145642001

SHEET TITLE

ELECTRICAL SYMBOLS,

ABBREVIATIONS, AND NOTES

DRAWING NO.

E000

PART ONE - GENERAL

1.1. THE WORK: ALL WORK SHALL BE NEW UNLESS OTHERWISE NOTED. THE CONTRACTOR SHALL

PROVIDE THE WORK SHOWN ON THE DRAWINGS AND SPECIFIED FOR ITS INDIVIDUAL

SECTIONS OF WORK. THE WORD "WORK" IS DEFINED AS ALL LABOR, TRANSPORTATION,

MATERIAL, EQUIPMENT, TOOLS, INSTALLATION, SUPERVISION AND ANY OTHER INCIDENTAL

ITEMS OR SERVICES NECESSARY FOR THE PROPER INSTALLATION AND OPERATION OF THE

COMPLETE SYSTEMS, WHICH SHALL BE PROVIDED BY THIS CONTRACTOR WHETHER OR NOT

SPECIFICALLY INDICATED OR NOTED.

1.2. RESPONSIBILITY: THIS CONTRACTOR IS SOLELY RESPONSIBLE FOR THE ACTIONS OF ITS

PERSONNEL, SUPPLIERS, AND SUB-CONTRACTORS. THIS CONTRACTOR SHALL BE

RESPONSIBLE FOR THE PERFORMANCE OF ALL WORK AS MAY BE REQUIRED TO

ACCOMMODATE OR SUPPORT THE ELECTRICAL WORK. EXAMPLES: PAINTING, STRUCTURAL

SUPPORTS, CUTTING AND PATCHING, EXCAVATION AND BACKFILL, CONCRETE PADS, ROOF

JACKS, ETC. REQUIRING THIS CONTRACTOR'S ENGAGEMENT OF APPROPRIATE TRADES TO

PERFORM SUCH WORK FOR THE PROPER INSTALLATION AND OPERATION OF COMPLETE

ELECTRICAL SYSTEMS.

1.3. MINIMUM REQUIREMENTS: THESE SPECIFICATIONS ESTABLISH THE MINIMUM REQUIREMENTS

FOR THE WORK AND MATERIALS, EQUIPMENT AND METHODS TO BE PROVIDED. THE

DRAWINGS MAY INDICATE REQUIREMENTS WHICH EXCEED THESE MINIMUMS.

1.4. GENERAL CONDITIONS: ALL GENERAL CONDITIONS, SPECIAL REQUIREMENTS OR GENERAL

REQUIREMENTS OF THE CONSTRUCTION SPECIFICATIONS ARE MADE PART OF THIS

SPECIFICATION AND HAVE THE SAME FORCE AND EFFECT AS IF COMPLETELY REPRODUCED.

1.5. DEFINITIONS:

AHJ: AUTHORITY HAVING JURISDICTION.

ASSEMBLY: AN INSTALLATION OR SYSTEM OF MULTIPLE COMPONENTS REQUIRING MULTIPLE

CONNECTIONS. (EXAMPLES: TRASH COMPACTOR, MOTORIZED DOOR, HVAC SPLIT SYSTEM,

ETC.).

EQUAL: ACCEPTED BY THE ENGINEER AS EQUAL.

FF&E: FURNISHINGS, FIXTURES AND EQUIPMENT - PROVIDED BY OTHERS AT JOBSITE.

RECEIVE, PROTECT, STORE, ASSEMBLE, INSTALL AND CONNECT. PROVIDE MINIMUM 5X

STRUCTURAL BACKING. (EXAMPLES: CHANDELIERS, PROJECTORS, ETC.).

PROVIDE: FURNISH, INSTALL, ACTIVATE, AND COMMISSION.

1.6. CODES: ALL WORK SHALL BE DONE IN ACCORDANCE WITH THE 2017 EDITION OF THE NATIONAL

ELECTRICAL CODE (NEC), THE 2018 EDITION OF THE INTERNATIONAL ENERGY CONSERVATION

CODE (IECC), AND ALL OTHER ADOPTED APPLICABLE FEDERAL, STATE, AND LOCAL

REGULATIONS.

1.7. PERMITS: PAY ALL FEES AND OBTAIN ALL PERMITS AND INSPECTIONS REQUIRED FOR THE

WORK.

1.8. DRAWINGS: DRAWINGS ARE DIAGRAMMATIC AND SCHEMATIC IN NATURE, AND INDICATE THE

TYPE, SIZE, ARRANGEMENT AND LOCATIONS OF MATERIALS AND EQUIPMENT. WORK

INCLUDES CERTAIN COMPONENTS, APPURTENANCES, AND RELATED SPECIALTIES THAT MAY

NOT BE SHOWN. PROVIDE ALL NECESSARY ITEMS TO COMPLETE THE WORK ACCORDING TO

INDUSTRY STANDARDS. IT IS THE INTENT OF THE DRAWINGS AND SPECIFICATIONS TO

REQUIRE FINISHED WORK, TESTED AND READY FOR OPERATION. DO NOT SCALE DRAWINGS.

ARRANGEMENT OF EQUIPMENT AND ROUTING OF FEEDERS AND BRANCH CIRCUITING SHALL

BE PLUMB AND AT RIGHT ANGLES TO BUILDING CONSTRUCTION, AND MAY REQUIRE

MODIFICATION DUE TO UNFORESEEN CONDITIONS REQUIRING ONSITE REVISIONS DURING

CONSTRUCTION. (SEE ALSO "BIDDING").

1.9. COORDINATION: THIS PROJECT REQUIRES A HIGH LEVEL OF COORDINATION AND

COOPERATION WITH OWNER, ARCHITECT, OTHER TRADES, VENDORS, AND SPECIALTY

CONTRACTORS. CAREFULLY EXAMINE ALL CONTRACT DOCUMENTS INCLUDING, BUT NOT

LIMITED TO, SHOP DRAWINGS, ETC. FOR ALL GENERAL CONSTRUCTION, STRUCTURAL,

MECHANICAL, PLUMBING, ELECTRICAL, AND SPECIALTY CONTRACTOR WORK. PRIOR TO

ROUGH-IN, COORDINATE THE WORK WITH ALL OTHER TRADES, TAKING RESPONSIBILITY FOR

THE PROPER FITTING OF MATERIAL INTO THE BUILDING AS PLANNED WITHOUT INTERFERENCE

WITH OTHER WORK. ESTABLISH AND VERIFY LOCATIONS, HEIGHTS, CONNECTION METHODS,

ETC. WITH EQUIPMENT INSTALLER (AND OWNER, ARCHITECT, AND/OR INTERIOR DESIGNER

FOR FF&E ITEMS), AND MAKE REASONABLE MODIFICATIONS IN THE LAYOUTS NEEDED TO

PREVENT CONFLICTS WITH OTHER TRADES IN ORDER TO PROVIDE ACCESS FOR THE PROPER

EXECUTION OF THE WORK.

1.10. IDENTICAL: ALL WORK REQUIRED FOR IDENTICAL ITEMS AND ASSEMBLIES OF THE PROJECT

SHALL BE PROVIDED, ALTHOUGH EACH SPECIFIC IDENTICAL ITEM MAY NOT BE SHOWN IN

DETAIL.

1.11. VERIFICATION: CHECK AND VERIFY ALL SIZES, DIMENSIONS, AND CONDITIONS BEFORE

STARTING ANY WORK. ANY DEVIATION(S) OR PROBLEM(S) SHALL BE TRANSMITTED TO THE

ENGINEER FOR REVIEW.

1.12. CONNECTIONS: CONNECT ALL EQUIPMENT, SYSTEMS, AND ASSEMBLIES PROVIDED BY

OTHERS INCLUDING CONTROLS, SAFETY DEVICES AND INTERCONNECTIONS. EXCEPTION: DO

NOT INTERCONNECT THE CONTROL SYSTEMS OF THOSE MECHANICAL AND PLUMBING

SYSTEMS WHICH ARE SPECIFICALLY NOTED TO BE THE RESPONSIBILITY OF THOSE TRADES.

PROVIDE FUSIBLE DISCONNECT SWITCHES AND MOTOR STARTERS FOR ALL EQUIPMENT

EXCEPT THOSE ITEMS WHICH ARE SPECIFICALLY LISTED WITH INTEGRAL

STARTERS/DISCONNECT SWITCHES. WHERE STARTERS AND/OR DISCONNECT SWITCHES ARE

FURNISHED TOGETHER WITH EQUIPMENT, RECEIVE, INSTALL, AND CONNECT THOSE ITEMS.

1.13. SUBMITTAL: SUBMIT TO THE ENGINEER COMPLETE ELECTRONIC SETS OF SHOP DRAWINGS

AND TECHNICAL DATA SHEETS FOR ALL EQUIPMENT AND MATERIALS SPECIFIED HEREIN. THE

ENGINEER SHALL REVIEW SHOP DRAWINGS AND TECHNICAL DATA SHEETS FOR

CONFORMANCE WITH THE CONTRACT DOCUMENTS AND ISSUE A WRITTEN ASSESSMENT TO

THE OWNER PRIOR TO COMMENCEMENT OF WORK. THE ENGINEER'S FAILURE TO CORRECT

ERRORS IN THE SUBMITTAL SHALL NOT RELIEVE THE CONTRACTOR OF THE OBLIGATION TO

PERFORM THE WORK AS SHOWN AND/OR SPECIFIED. THE CONTRACTOR SHALL BE

RESPONSIBLE FOR ALL ENGINEERING FEES NECESSARY TO CHANGE PROJECT DOCUMENTS

BASED ON ALTERNATE SUBMITTAL PACKAGES/EQUIPMENT SUBSTITUTIONS.

1.14. OR-EQUAL SUBSTITUTIONS: ALL PROPOSED "OR EQUAL" SUBSTITUTIONS SHALL BE

SUBMITTED TO THE ENGINEER FOR CONSIDERATION PRIOR TO BIDDING AND AFTER ALL

REQUIREMENTS ASSOCIATED WITH SUBSTITUTED EQUIPMENT AND/OR MATERIALS HAVE BEEN

COORDINATED WITH OTHER BUILDING TRADES, INCLUDING ALL MECHANICAL, STRUCTURAL,

AND/OR ARCHITECTURAL ELEMENTS. THE OWNER'S REPRESENTATIVE SHALL PRE-APPROVE

ANY PROPOSED SUBSTITUTION IN WRITING. IDENTIFY AND ANNOTATE ALL REVISED

REQUIREMENTS PER BUILDING TRADE ON THE SHOP DRAWINGS. ALSO IDENTIFY ALL COST

DEBITS OR CREDITS IN WRITING FOR THE PROPOSED CHANGES PER BUILDING TRADE AND

SUMMARIZE THESE AS A TOTAL NET-TO-OWNER CHARGE OR CREDIT FOR CONSIDERATION.

1.15. AS-BUILT: UPON COMPLETION OF CONSTRUCTION, SUPPLY THE ENGINEER WITH AS-BUILT

DOCUMENTS ACCURATELY SHOWING THE MATERIALS AND EQUIPMENT AS INSTALLED.

PROVIDE OPERATION AND MAINTENANCE MANUAL(S) CONTAINING APPROVED SHOP

DRAWINGS, OPERATING AND MAINTENANCE INSTRUCTION FOR SWITCHGEAR, LIGHTING

FIXTURES, CONTROLS, AND SPECIALTY EQUIPMENT.

1.16. GUARANTEE: ALL MATERIALS AND WORKMANSHIP SHALL BE GUARANTEED FOR A MINIMUM OF

ONE (1) YEAR FROM DATE OF ACCEPTANCE BY OWNER (LONGER IF REQUIRED BY GENERAL

AND/OR SPECIAL CONDITIONS). IN ADDITION, THE INSTALLATION SHALL BE GUARANTEED TO

PERFORM AS SPECIFIED AND FULFILL EACH AND EVERY REQUIREMENT OF THE DRAWINGS

AND SPECIFICATIONS WHEN OPERATED IN ACCORDANCE WITH THE CONTRACTOR'S

INSTRUCTIONS. SHOULD THE INSTALLATION IN ANY WAY FAIL TO DO SO, THE CONTRACTOR

WILL, WITHOUT DELAY AND WITHOUT COST TO THE OWNER, PROVIDE WHATEVER ADDITIONAL

EQUIPMENT, MATERIAL, AND LABOR REQUIRED TO CORRECT THE DEFICIENCY AND COMPLY

WITH THE REQUIREMENTS OF THE DRAWINGS AND SPECIFICATIONS. WHERE SPECIFIED

EQUIPMENT HAS A LONGER GUARANTEE PERIOD, THE TERMS OF THAT GUARANTEE SHALL

GOVERN (EXAMPLE: LED SYSTEM WITH 5 YEAR GUARANTEE). INCANDESCENT LAMPS ARE

EXEMPT BUT SHALL BE NEW AND UNUSED AT THE TIME OF FINAL ACCEPTANCE.

1.18. IECC COMPLIANCE: COMPLY WITH ALL REQUIREMENTS SET FORTH IN THE IECC COMPLIANCE

CERTIFICATE INCLUDED IN THESE DOCUMENTS. HIRE A COMMISSIONING AGENT TO COMPLY

WITH AND PERFORM ALL ASPECTS OF SECTION C408 OF THE 2018 IECC.

BIDDING

1.19. SITE VISIT: CONTRACT DOCUMENTS INDICATE NEW WORK TO BE PERFORMED AND DO NOT

PURPORT TO SHOW ALL EXISTING CONDITIONS. VISIT THE SITE PRIOR TO SUBMITTING A BID

TO BECOME FAMILIAR WITH EXISTING CONDITIONS. COMPARE THE WORK SPECIFIED IN THE

CONTRACT DOCUMENTS AGAINST EXISTING CONDITIONS, AND IDENTIFY AND ANNOTATE ALL

WORK OR CONDITIONS THAT ARE DIFFERENT FROM THE CONTRACT DOCUMENTS OR THEIR

INTENT. UPON DISCOVERY, IMMEDIATELY NOTIFY AND REPORT IN WRITING ANY

DISCREPANCIES TO THE ENGINEER. NO EXTRAS OR CHANGE ORDERS WILL BE ALLOWED FOR

FAILURE TO PERFORM THE PRE-BID SITE VISIT.

ELECTRICAL SPECIFICATIONS

1.20.

1.21.

1.22.

1.23.

BASIS OF PROPOSAL: PROPOSAL SHALL BE BASED ON MANUFACTURERS AND MODELS AS

LISTED UNLESS "OR EQUAL" IS INDICATED. PROVIDE SUBSTITUTION REQUESTS A MINIMUM OF

FIVE (5) BUSINESS DAYS PRIOR TO BID DATE CLOSING TO ALLOW TIME FOR DUE

CONSIDERATION OF PROPOSED ALTERNATE AND SUBSEQUENT NOTIFICATION TO ALL OTHER

BIDDERS IN THE EVENT SUBSTITUTION IS DEEMED ACCEPTABLE. DETERMINATION OF

SUBSTITUTION EQUALITY RESTS SOLELY WITH THE ENGINEER.

VALUE ENGINEERING (V.E.) INITIATIVES: IN ADDITION TO THE "AS SPECIFIED/OR EQUAL" BASE

BID, A COST REDUCTION INITIATIVE(S) MAY BE PROPOSED BASED ON SUBSTITUTIONS OF

EQUIPMENT, MATERIALS, AND/OR METHODS. EACH SUCH PROPOSAL SHALL INCLUDE A DATA

SHEET(S) ON THE SPECIFIED ITEM(S), THE PROPOSED SUBSTITUTE(S), AND THE NET CREDIT

TO THE OWNER, INCLUDING ALL CREDITS AND CHARGES FROM ALL MEMBERS OF THE

CONSTRUCTION TEAM. THE ENGINEER WILL REVIEW AND RENDER AN OPINION TO THE

OWNER. IF THE V.E. INITIATIVE IS DECLINED, PROVIDE THE SPECIFIED

EQUIPMENT/MATERIAL/METHOD. IF THE V.E. INITIATIVE IS ACCEPTED, AND IF SUCH

ACCEPTANCE RESULTS IN A REQUIREMENT TO REVISE ANY DESIGN DOCUMENTS, THE

CHARGES FOR THESE REVISIONS SHALL BE BILLED TO THE CONTRACTOR AND THE INVOICING

SHALL BE SETTLED BEFORE THE PROJECT IS SIGNED OFF FOR FINAL ACCEPTANCE.

BIDDING: THE CIVIL, ARCHITECTURAL, MECHANICAL, KITCHEN, AND/OR INTERIOR DRAWINGS

CONTAIN DETAILED DESCRIPTIONS, CIRCUITING, AND CONNECTION REQUIREMENTS WHICH

ARE PART OF THIS CONTRACTOR'S RESPONSIBILITIES. DO NOT SUBMIT BIDS ON THIS

PROJECT PRIOR TO REVIEWING ALL PROJECT DRAWINGS, SPECIFICATIONS, AND ADDENDA.

SPECIFICATIONS BOOK: THE SPECIFICATIONS CONTAIN SIGNIFICANT INFORMATION,

CONDITIONS, AND PROCEDURES WHICH MAY HAVE A SUBSTANTIAL IMPACT ON THIS

CONTRACTOR'S COSTS. DO NOT SUBMIT A BID ON THIS PROJECT UNLESS THE

SPECIFICATIONS HAVE BEEN THOROUGHLY REVIEWED. THE GENERAL NOTES CONTAINED

HEREIN ARE COMPLIMENTARY TO THE SPECIFICATIONS BOOK, AND IN COMPARISON THE MORE

STRINGENT REQUIREMENT(S) SHALL GOVERN.

PART TWO - PRODUCTS

2.1. EQUIPMENT STANDARDS: ALL MATERIALS AND EQUIPMENT SHALL BE NEW AND OF THE

HIGHEST QUALITY AVAILABLE ("SPECIFICATION GRADE"). EQUIPMENT SHALL BE

CONSTRUCTED TO NEMA STANDARDS AND SHALL BE LABELED FOR THEIR INTENDED PURPOSE

BY A RECOGNIZED TESTING AGENCY ACCEPTABLE TO THE AHJ (U.L., CSA, ETL, ETC.).

2.2. ACCEPTABLE MANUFACTURERS AND SUPPLIERS : WHERE EQUIPMENT AND MATERIALS ARE

NOT SPECIFIED BY NAME THEY ARE DEEMED TO GENERIC, SUBJECT TO THE

REQUIREMENTS LISTED HEREIN. THESE MANUFACTURERS ARE CONSIDERED CAPABLE OF

OFFERING EQUIVALENT PRODUCTS. MINIMUM STANDARD IN ALL INSTANCES IS COMMERCIAL

GRADE:

SWITCHGEAR: EATON, GENERAL ELECTRIC, SIEMENS, SQUARE D

LIGHT FIXTURES: ACUITY, COOPER, HUBBELL, THOMAS

WIRING DEVICES: HUBBELL, LEVITON, LEGRAND, WIREMOLD

2.3. CIRCUITING: ALL WIRING SHALL BE IN CONDUIT, CONCEALED WHERE POSSIBLE EXCEPT FOR

BRANCH CIRCUITS WITHIN EACH RESIDENTIAL UNIT. EMT WITH STEEL INSULATED THROAT SET

SCREW FITTINGS MAY BE USED IN DRY, PROTECTED INTERIOR LOCATIONS. PVC SCHEDULE 40

SHALL BE USED BELOW GRADE AT MINIMUM -24". WRAPPED RIGID ELBOWS AND RISERS

SHALL BE USED FOR ALL THROUGH-GRADE TRANSITIONS AND STUB-UPS. RGS OR IMC

CONDUIT WITH THREADED FITTINGS SHALL BE USED IN ALL LOCATIONS WHERE EXPOSED TO

THE ELEMENTS OR SUBJECT TO PHYSICAL DAMAGE. IMC OR RIGID CONDUIT BELOW GRADE

SHALL BE HALF-LAP WRAPPED WITH 20 MIL PVC TAPE. TYPE ENT RACEWAY IS NOT ALLOWED.

CONNECT RECESSED AND SUSPENDED LIGHTING FIXTURES, MOTORIZED AND/OR VIBRATING

EQUIPMENT WITH STEEL FLEX OR SEALTITE CONDUIT. ALL CONDUIT SHALL HAVE PULL CORD IF

OTHERWISE EMPTY.

2.4. MC CABLE: MC CABLE MAY BE USED ONLY WITH SPECIFIC PERMISSION FROM THE ENGINEER.

MC CABLE USE SHALL BE LIMITED TO CIRCUITING SOLUTIONS IN TIGHT CONDITIONS WHERE

CONDUIT AND WIRE CIRCUITING CANNOT FIT. HOMERUNS AND FEEDERS SHALL BE CONDUIT

AND WIRE.

2.5. WIRING: ALL WIRE SHALL BE COPPER UNLESS OTHERWISE NOTED. ALL WIRE SHALL BE

STRANDED IN SIZES #8 AWG AND LARGER. SINGLE PHASE BRANCH CIRCUITS SHALL INCLUDE

A SEPARATE NEUTRAL WIRE WITH EACH PHASE WIRE. NEUTRAL SHALL BE WHITE WITH COLOR

STRIPE MATCHING COLOR OF PHASE WIRE. HOMERUNS TO PANELBOARDS SHALL BE MINIMUM

#12 AWG CU IN 3/4" CONDUIT UNLESS OTHERWISE NOTED.

2.6. FUSES AND CIRCUIT BREAKERS: FUSES AND CIRCUIT BREAKERS SHALL BE SIZED PER ACTUAL

RESPECTIVE APPLICATION (i.e., MOTOR CIRCUIT PROTECTOR, GROUND FAULT CIRCUIT

INTERRUPTER, ARC FAULT CIRCUIT INTERRUPTER, ETC.). FUSES SHALL BE DUAL ELEMENT,

CURRENT-LIMITING, AND SHALL BE INTERCHANGEABLE BETWEEN FRAME SIZES WITH

STANDARD FACTORY FUSE REDUCERS. PROVIDE LOCKABLE SPARE FUSE CABINET WITH (3)

SPARE FUSES OF EACH SIZE USED.

2.7. DISTRIBUTION SWITCHGEAR: SWITCHGEAR SHALL HAVE COPPER BUS AND HEAVY GAUGE

HOUSINGS. SWITCHGEAR IN LOCATIONS OTHER THAN LOCKED ELECTRIC ROOMS SHALL HAVE

LOCKABLE COVERS. SWITCHGEAR SHALL HAVE NO LESS THAN 20% SPARE BUSSED AND

USABLE SPACE, MEASURED AS A PERCENTAGE OF THE SPACE OCCUPIED BY SPECIFIED

CIRCUIT BREAKERS, SWITCHES, ETC.

2.8. SERVICE SWITCHGEAR: IN ADDITION TO THE ABOVE, SERVICE SWITCHGEAR SHALL MEET THE

REQUIREMENTS OF THE SERVING UTILITY.

2.9. PANELBOARDS: PANELS SHALL HAVE COPPER BUS AND HARDWARE, BOLT-ON CIRCUIT

BREAKERS, FLUSH MONO-FLAT TRIM, PIANO HINGED DOORS AND COVER (DOOR-IN-DOOR)

WITH LOCKABLE MASTER-KEYED FLUSH LATCHES. FLUSH-MOUNTED PANELS SHALL HAVE

EMPTY CONDUITS STUBBED TO ACCESSIBLE ATTIC SPACE: (1) 3/4" CONDUIT FOR EACH THREE

(3) SPARE/SPACE CIRCUITS.

2.10. SAFETY SWITCHES: SWITCHES SHALL BE GENERAL DUTY UP TO 250 VOLTS, HEAVY DUTY

ABOVE 250 VOLTS. FUSIBLE SWITCHES SHALL BE FUSED PER THE NAMEPLATE

REQUIREMENTS OF THE EQUIPMENT BEING CONNECTED.

2.11. MOTOR STARTERS: STARTERS SHALL BE MINIMUM NEMA SIZE 1 WITH INTEGRAL CONTROL

TRANSFORMER, RED NEON "RUN" PILOT LIGHT AND "ON-OFF-AUTO" SELECTOR SWITCH ON

COVER. OVERLOAD DEVICES SHALL BE SIZED PER THE NAMEPLATE AMPERAGE OF THE

EQUIPMENT BEING CONTROLLED.

2.12. CONTACTORS: CONTACTORS SHALL BE ELECTRICALLY HELD WITH "ON-OFF-AUTO" SELECTOR

SWITCH ON COVER.

2.13. RATINGS: ALL ELECTRICAL EQUIPMENT SHALL BE FULLY RATED FOR BRACING IN EXCESS OF

THE MAXIMUM AVAILABLE FAULT CURRENT CALCULATED AND SHOWN AT THE EQUIPMENT

CONNECTION POINT WITHIN THE DISTRIBUTION SYSTEM. MINIMUM RATING SHALL BE 10K AIC.

2.14. WIRING DEVICES: WIRING DEVICES (SWITCHES, RECEPTACLES, ETC.) SHALL BE

SPECIFICATION GRADE "DECORA" STYLE, MINIMUM 20-AMP RATED. COVER PLATES SHALL BE

NYLON. DEVICE AND PLATE COLOR(S) SHALL BE AS SPECIFIED BY ARCHITECT OR INTERIOR

DESIGNER - VERIFY PRIOR TO COMMENCEMENT OF WORK. WIRING DEVICES EXPOSED TO THE

ELEMENTS SHALL HAVE WEATHERPROOF-IN-USE LOCKABLE COVERS. RAISED STEEL BOX

COVERS MAY BE USED IN UTILITY AREAS. REFER TO FOOD SERVICE NOTES (IF APPLICABLE TO

THIS PROJECT) FOR ADDITIONAL REQUIREMENTS.

2.15. TRANSFORMERS: TRANSFORMERS SHALL BE TYPE TP-1 MINIMUM, WITH ALUMINUM WINDINGS,

RATED FOR 150°C RISE (UNLESS OTHERWISE NOTED), MOUNTED ON RUBBER-IN-SHEAR

VIBRATION ISOLATORS, CONNECTED WITH FLEXIBLE CONDUIT. PUBLISHED AND MEASURED

NOISE RATING SHALL NOT EXCEED NEMA TP-20 MAXIMUM.

2.16. LIGHTING FIXTURES: LIGHT FIXTURES SHALL BE PROVIDED WITH ALL ASSOCIATED HARDWARE

(HANGER BARS, PENDANTS, STEMS, RESTRAINTS, CHAINS, CORDS, LAMPS, ETC.). LENSES

SHALL BE ACRYLIC, REFLECTORS SHALL BE ANODIZED. FLUORESCENT BALLASTS SHALL BE

ELECTRONIC, PROGRAM RAPID START, THD LESS THAN 10%. FLUORESCENT LAMPS SHALL

HAVE MINIMUM CRI OF 80%. INCANDESCENT LAMPS SHALL BE 120 VOLT, INSIDE FROST,

MINIMUM 2000 HOUR LIFE. LOW VOLTAGE INCANDESCENT LAMPS SHALL BE HIR HALOGEN,

MINIMUM 3000 HOUR LIFE. EXTERIOR LIGHTING FIXTURES SHALL BE INSTALLED TO PREVENT

WATER, DUST AND INSECT INTRUSION, WITH GASKETING FOR DOOR/BACKPLATE AND SEALANT

AT THE WIRING ENTRY POINT. REFER TO LIGHTING FIXTURE SCHEDULE WITHIN PLAN SET FOR

ADDITIONAL REQUIREMENTS (LED CRITERIA, ETC.).

2.17. TAMPERPROOF: ALL EQUIPMENT AND CIRCUITING ACCESSIBLE BY THE PUBLIC SHALL BE

DEMONSTRATED TO BE TAMPERPROOF AND VANDAL RESISTANT. OPENABLE DEVICES AND

EQUIPMENT SHALL BE PAD LOCKABLE.

PART THREE - EXECUTION

3.1. GROUNDING: GROUND ALL EQUIPMENT AND SYSTEM NEUTRAL IN ACCORDANCE WITH THE

REQUIREMENTS OF NEC ARTICLE 250. PROVIDE CODE-SIZED EQUIPMENT GROUNDING

CONDUCTOR IN ALL FEEDERS AND BRANCH CIRCUIT RACEWAYS. WHERE ISOLATED GROUNDS

ARE INDICATED, PROVIDE INSULATED CONDUCTOR (GREEN WITH YELLOW STRIPE).

3.2. UTILITY SERVICES: PROVIDE POWER AND COMMUNICATIONS SYSTEM SERVICES IN

ACCORDANCE WITH THE REQUIREMENTS OF THE SERVING UTILITIES. CONTRACTOR TO

PROVIDE ARC FLASH STUDY AND LABELLING ON ALL NEW EQUIPMENT IN ACCORDANCE WITH

NEC. PROVIDE EXCAVATION, RACEWAY, STRUCTURES, GROUNDING, ETC. AS DIRECTED.

POWER SERVICES AND DISTRIBUTION SYSTEM AIC RATING SHALL EXCEED MAXIMUM

AVAILABLE FAULT CURRENT THROUGH UTILITY SERVICE TRANSFORMER. CONTACT SERVING

UTILITIES AND OBTAIN THEIR REQUIREMENTS PRIOR TO BID. (UTILITY SERVICE AND LINE

EXTENSION CHARGES PAID BY OTHERS).

3.3. TEMPORARY CONSTRUCTION POWER : PROVIDE TEMPORARY ELECTRICAL POWER

DISTRIBUTION AND LIGHTING AS REQUIRED FOR ALL TRADES THAT REQUIRE SERVICE DURING

THE COURSE OF THIS PROJECT IN COMPLIANCE WITH ALL NEC AND OSHA REQUIREMENTS.

OWNER SHALL NOT BE RESPONSIBLE FOR TEMPORARY POWER CHARGES.

3.4. LOCATIONS: INDICATED LOCATIONS OF ALL OUTLETS AND EQUIPMENT ARE SUBJECT TO

CHANGE. SHIFT/RELOCATE/RECONFIGURE ANY OUTLET, EQUIPMENT OR CONNECTION POINT

UP TO 10' AS DIRECTED BY ENGINEER AT NO ADDED COST.

3.5. WORKMANSHIP: THE WORK SHALL BE INSTALLED PARALLEL AND AT RIGHT ANGLES TO THE

BUILDING LINES, LEVEL AND PLUMB. THE WORK SHALL BE WELL SUPPORTED AND SOLIDLY

MOUNTED. DRESS AND TIE WIRING IN PANELBOARDS AND SWITCHGEAR. THE WORK SHALL BE

LEFT CLEAN WITH NO DIRT, DENTS, ABRASIONS, PAINT SPLATTERS, OR OTHER

IRREGULARITIES.

3.6. FIRE STOPPING: ALL PENETRATED FIRE RATED SURFACES SHALL BE FIRE SEALED WITH

APPROVED U.L. LISTED SEALANTS AS LISTED WITHIN ARCHITECTURAL SPECIFICATIONS. DO

NOT EXCEED MAXIMUM ALLOWABLE SURFACE PENETRATIONS DEPENDENT ON RATING OF

SURFACES. REFER TO ARCHITECTURAL DRAWINGS FOR DETERMINATION OF PENETRATION

LOCATIONS THROUGH FIRE RATED ASSEMBLIES.

3.7. SUPPORTS AND HANGERS : PROVIDE 3" HIGH HOUSEKEEPING CONCRETE PAD BENEATH

FLOOR MOUNTED EQUIPMENT, EXTENDING 3" BEYOND EQUIPMENT FOOTPRINT. SUPPORT

AND ALIGN ALL RACEWAYS, CABINETS, BOXES, BACK BOXES, FIXTURES, AND EQUIPMENT

FROM STRUCTURE. SECURE ALL SUPPORTING METHODS BY MEANS OF TOGGLE BOLTS IN

HOLLOW MASONRY, EXPANSION BOLTS IN SOLID MASONRY, CONCRETE PRESET INSERTS OR

EXPANSION BOLTS IN CONCRETE, MACHINE SCREWS OR BOLTS IN METAL, AND WOOD

SCREWS IN WOOD CONSTRUCTION. ALL SUPPORTING SYSTEMS AND COMPONENTS SHALL BE

RATED FOR A MINIMUM OF FIVE (5) TIMES THE ACTUAL LOAD.

3.8. SLEEVES AND PENETRATIONS: PENETRATIONS OF ALL SURFACES SHALL BE PROVIDED WITH

SLEEVES THAT SHALL BE SEALED WITH LIKE MATERIALS AND SHALL BE FINISHED WITH

ESCUTCHEON PLATES. PENETRATIONS BELOW GRADE LEVEL SHALL BE WATERTIGHT.

PENETRATIONS AT EXTERIOR WALLS SHALL BE WEATHERPROOF. ROOF PENETRATIONS

SHALL BE FLASHED AND COUNTER FLASHED.

3.9. EXPANSION AND CONTRACTION: RACEWAYS PASSING THROUGH BUILDING EXPANSION

JOINTS, ON ROOF, AND IN AREAS OF TEMPERATURE VARIATIONS GREATER THAN 30°F SHALL

BE INSTALLED WITH EXPANSION FITTINGS.

3.10. IDENTIFICATION: IDENTIFY ALL EQUIPMENT, SWITCHBOARD CIRCUITS AND ELECTRICALLY-

CONNECTED EQUIPMENT WITH ENGRAVED NAMEPLATES. BOXES SHALL BE MARKED WITH

PANEL AND CIRCUIT NUMBERS (PERMANENT PEN ACCEPTABLE ABOVE CEILING).

NAMEPLATES SHALL BE FASTENED WITH A MINIMUM OF TWO (2) SCREWS. PANEL

DIRECTORIES SHALL BE TYPED. CONDUCTORS SHALL BE TAGGED WITH CIRCUIT NUMBERS AT

SOURCE, JUNCTION BOXES, AND ALL OUTLET BOXES WITH PERMANENT ADHESIVE MARKER

STRIP. PANEL DIRECTORIES SHALL BE TYPED. IDENTIFY WIRING DEVICES WITH SELF

ADHESIVE CLEAR SATIN FINISH LABELS WITH SOURCE AND CIRCUIT NUMBER.

3.11. ELECTRIC ROOM CODE COMPLIANCE : DUE TO THE DIAGRAMMATIC NATURE OF THE DESIGN

DOCUMENTS (ELECTRICAL, MECHANICAL, PLUMBING, FIRE SPRINKLER, ETC.), COORDINATE

WITH ALL OTHER SUBCONTRACTORS AT THE START OF THIS PROJECT TO INFORM AND VERIFY

THAT NO FOREIGN SYSTEMS OR EQUIPMENT ARE MOUNTED ABOVE ELECTRICAL EQUIPMENT

OR PASS THROUGH THE DESIGNATED ELECTRIC ROOMS, AND THAT A MINIMUM OF 7'-0" IS

PROVIDED AS CLEAR HEADROOM ALONG ACCESS PATHS TO ELECTRIC ROOMS. ANY

REROUTING OR RELOCATION OF SYSTEMS THAT A SUBCONTRACTOR FEELS WILL

COMPROMISE THE DESIGN INTENT SHALL BE DESCRIBED IN WRITING AND FORWARDED TO

THE DESIGN ENGINEER FOR FURTHER REVIEW. ALL PIPING TO HVAC UNITS THAT COOL

ELECTRIC ROOMS SHALL BE LOCATED ABOVE ENTRY DOOR. THE SPRINKLER PIPING TO

PROVIDE PROTECTION FOR THE ELECTRIC ROOM IS PREFERRED TO ENTER THE ROOM ABOVE

THE ENTRY DOOR AND RUN DOWN THE AISLE SPACES OF THE ROOM. ALL INSTALLATIONS

SHALL BE FULLY COORDINATED AMONGST ALL TRADES.

3.12. ELECTRICALLY-OPERATED EQUIPMENT: VERIFICATION AND SUBSTITUTION: FEEDERS AND

OVER-CURRENT DEVICES (INCLUDING STARTERS, DISCONNECTS, ETC.) HAVE BEEN DESIGNED

BASED ON INFORMATION PROVIDED BY THE RESPONSIBLE CONSULTANT AND/OR DESIGNATED

SUPPLIER. PRIOR TO ROUGH-IN, COORDINATE WITH THE APPROPRIATE TRADE AND/OR

INSTALLER TO DETERMINE THAT THE ACTUAL NAMEPLATE ELECTRICAL REQUIREMENTS

MATCH THIS DESIGN. ALL ADDITIONAL ELECTRICAL COSTS RELATED TO THE CONNECTION OF

EQUIPMENT WHICH VARIES FROM THE ORIGINAL SPECIFICATIONS SHALL BE RESOLVED WITHIN

THE CONSTRUCTION TEAM AT NO ADDITIONAL COST TO THE OWNER.

3.13. ADDITIONAL SYSTEMS AND EQUIPMENT CONNECTIONS : IN ADDITION TO EQUIPMENT POWER

FEEDERS AND CONNECTIONS INDICATED ON THE ELECTRICAL DRAWINGS, PROVIDE 120V

CONTROL POWER CONNECTIONS TO SMOKE/FIRE DAMPERS, VAV BOXES, TEMPERATURE

CONTROL, FIRE ALARM PANELS, DOOR HOLDING/LATCHING DEVICES, ETC. AS INDICATED IN

THE PROJECT DRAWINGS AND SPECIFICATIONS AS WELL AS ALL DESIGN-BUILD SYSTEM

DRAWING.

MAX NO. PER PROVIDE SMOKE

ITEM

POWER SOURCE

20A CIRCUIT DETECTORS

FIRE/SMOKE DAMPER

EMERGENCY

10

YES

VAV TERMINAL (NO FAN)

NORMAL (VERIFY)

10

NO

TEMPERATURE CONTROL PANEL

EMERGENCY (VERIFY) 1

NO

FIRE ALARM PANEL

EMERGENCY

1

NO

DOOR HOLDING/LATCHING DEVICES EMERGENCY

10

NO

3.14. HOURS OF OPERATION: CONDUCT WORK TO MINIMIZE DISRUPTION OF OWNER'S ONGOING

BUSINESS OPERATIONS. PROVIDE BARRICADES, NOISE ABATEMENT, AND DUST CONTAINMENT

MEASURES TO ENSURE THE SAFETY AND COMFORT OF PATRONS, STAFF, AND WORKERS.

INTERRUPTIONS OF EXISTING POWER, COMMUNICATIONS, AND/OR FIRE ALARM SYSTEMS

SHALL BE PERFORMED ONLY AT SUCH TIMES AS DIRECTED BY OWNER OR RESIDENT

ENGINEER. OUTAGES SHALL BE MOMENTARY IN NATURE, EACH SUCH OUTAGE (OR

OPERATION WHICH MAY POSE RISK OF AN ACCIDENTAL OUTAGE) SHALL BE SCHEDULED A

MINIMUM OF FORTY-EIGHT (48) HOURS IN ADVANCE.

3.15. COMMUNICATIONS SYSTEMS: THE ELECTRICAL CONTRACTOR SHALL PROVIDE OUTLETS AND

RACEWAYS FOR COMMUNICATION SYSTEMS AS INDICATED HEREIN, INCLUDING TELEPHONE,

DATA, POINT-OF-SALE, SOUND, SECURITY, AUDIO/VISUAL, CCTV, MATV, ETC. CABLING AND

DEVICES SHALL BE INSTALLED AND TERMINATED BY OTHERS.

PART FOUR - SPECIAL SYSTEMS

4.1. THIRD PARTY TESTING: PROVIDE ALL ASSOCIATED COSTS FOR THIRD PARTY TESTING OF ALL

EQUIPMENT, CONDUCTORS, GROUND FAULT, GROUND FAULT COORDINATION STUDY WITH

REPORT PREPARATION, ETC. AS REQUIRED BY THE NEC, AHJ, AND ALL OTHER GOVERNING

AUTHORITIES.

200 S. ORANGE AVENUE

SUITE 600

ORLANDO, FL 32801

PHONE: 407.898.1511

REGISTRY NO. 35106

2025 ©

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

JIMMY NGUYEN

PE 91973

ARCH/ENGR OF RECORD

DESIGNED BY

JN

DRAWN BY

SRM

ISSUE DATE

11/18/2025

AE PROJECT NUMBER

145642001

SHEET TITLE

ELECTRICAL SPECIFICATIONS

DRAWING NO.

E001

GIRLS BOYS

13-005A13-004A

PRIMARY/INTERM

CLASSROOM

13-005

PRIMARY/INTERM

CLASSROOM

13-004

HVAC EQUIP

COUURT

13-0018

1

2

E101 E101

BOYS/GIRLS

13-003A

PRIMARY/INTERM

CLASSROOM

13-003

MECHANICAL

13-0013

CUSTODIAL

13-0015

CORRIDOR

13-0017

ELECT.

13-0012

GIRLS BOYS

13-002A13-001A

PRIMARY/INTERM

CLASSROOM

13-002

SYSTEMS

13-0014

PRIMARY/INTERM

CLASSROOM

13-001

GIRLS

13-019

BOYS

13-020

PRIMARY/INTERM

CLASSROOM

13-006

PRIMARY/INTERM

CLASSROOM

13-007

TEACHER

PLANNING

13-008

TEACHER

PLANNING

13-009

PRIMARY/INTERM

CLASSROOM

13-0010

PRIMARY/INTERM

CLASSROOM

13-0011

GIRLS BOYS

13-006A13-007A

GIRLS BOYS

13-0010A13-0011A

1

ELECTRICAL NEW PLAN

3/32" = 1'-0"

GENERAL DEMO NOTES:

A.

MAKE ALL NECESSARY ALTERNATION TO COORDINATE AND CONNECT THE EXISTING WITH THE NEW

ELECTRICAL WORK TO THE END THAT WHEN THE WORK IS COMPLETE. THE ENTIRE ELECTRICAL

INSTALLATION, EXISTING AND NEW, SHALL BE IN COMPLETE OPERATION CONDITION. THE DRAWINGS

INDICATE THE WORK WHICH IS TO BE IN PLACE AT THE COMPLETION OF THE INSTALLATION.

B.

EXCEPT WHERE SPECIFICALLY NOTED TO THE CONTRARY, ALL EXISTING FIXTURES, SWITCHES AND OTHER

MATERIALS OR EQUIPMENT THAT IS REPLACED WITH NEW AND IS NOT INDICATED TO BE REUSED SHALL BE

TURNED OVER TO THE OWNER OR BE DISPOSED OF AS DIRECTED BY THE OWNER.

C.

EXISTING MATERIAL TO REMAIN UPON COMPLETION IS INDICATED ON DRAWINGS AS EXISTING. CONDUIT AND

WIRING IS EXISTING TO THEIR RESPECTIVE SOURCE. ALTHOUGH NOT INDICATED ON THE DRAWINGS, THIS

MAY REQUIRE TEMPORARY REMOVAL OR RE-ROUTING OF CONDUITS AND REPLACING EXISTING WIRING

WITH NEW DURING THE COURSE OF CONSTRUCTION WORK.

D.

FURNISH AND INSTALL NEW BLANK PLATES FOR ALL REMOVED OUTLETS,6S.86WSIFT2C2H.7ESFS, LIGHT FIXTURES, ETC.,

WHEN THE OUTLET BOX IS TO REMAIN.

CASEMENT

E.

REMOVE ALL EXISTING CONDUCTORS AND EXPOSED CONDUITS ABANDONED BACK TO PANEL BOARD. LABEL

NEW PANEL DIRECTORY AS "SPARE"

EFCO SERIES 660 SH (3)6.86 SF = 20.58 SF SH +

22.7 SF CASEMENT = 43.28 SF TOTAL

F.

MAINTAIN CONTINUITY OF ALL ELECTRICAL SYSTEMS, EQUIPMENT, ETC., REMAINING IN OPERATION WHICH IS

BEING FED BY

CONDUIT AND

WANIRAINBGA,NADSORNEEQDUOIRUETDLETTO. MSAUIINTTTAHINEINEXGISCTO5SI%NFN(NGT8A9I7NTCUGUORSIANFTL)DYCVILESTANIHSTOSIALRNALOTSLOIO.MCNO= 4N4.S85IST

OF

RE-ROUTING

OF

REQUIRED

GENERAL NEW NOTES:

A.

FURNISH ALL LABOR, MATERIALS, TOOLS, ACCESSORIES, ETC. REQUIRED FOR A COMPLETE WORKING

ELECTRICAL SYSTEM.

B.

ALL ELECTRICAL WORK SHALL COMPLY WITH ALL APPLICABLE STATE, COUNTY, AND LOCAL CODES AND

ORDINANCES, AS WELL AS ALL CURRENT STANDARDS, CODES AND PRACTICES AS REQUIRED BY NEC

2017, NEMA, ANSI, NFPA, UBC, UL, IEEE, AND UTILITY COMPANY STANDARDS.

C.

ALL EQUIPMENT, MATERIALS, AND WORK SHOWN ARE NEW UNLESS SPECIFICALLY NOTED AS EXISTING

OR NOTED OTHERWISE ON OTHER SHEETS.

D.

ANY POWER OUTAGE OF ANY CIRCUIT SHALL BE APPROVED BY THE OWNER IN WRITING A MINIMUM OF

TWO WEEKS PRIOR TO OUTAGE. ALL OUTAGES SHALL BE DONE EXACTLY WHEN DETERMINED BY THE

OWNER AND DONE BEFORE OR AFTER WORKING HOURS AND ON WEEKENDS. NO SINGLE OUTAGE SHALL

REQUIRE MORE THAN 4 HOURS. PROVIDE TEMPORARY POWER, HEAT AND COOLING AS REQUIRED

DURING OUTAGE.

E.

DUE TO THE REQUIREMENTS TO INTERFACE WITH EXISTING FACILITIES AND UTILITIES, IT IS REQUIRED

THAT THE CONTRACTOR VISIT THE SITE TO DETERMINE EXISTING CONDITIONS PRIOR TO BID.

F.

PRIOR TO PURCHASE OF ANY PANEL, PROTECTIVE DEVICES, SWITCH, STARTER, CONDUIT, WIRE, ETC., TO

FEED ANY PIECE OF MECHANICAL EQUIPMENT, VERIFY THE VOLTAGE, PHASE, AND LOAD OF THAT ITEM IN

THE FIELD AND/OR WITH THE PARTICULAR ENTITY INVOLVED IN FURNISHING THE ITEM SUCH THAT THE

PROPER SIZE & RATING OF THE MATERIALS ARE PURCHASED. NO EXTRAS WILL BE ALLOWED FOR

FAILURE TO COMPLY. THIS APPLIES TO ALL EQUIPMENT UNDER OTHER SECTIONS & BY THE OWNER.

G.

PULL ROPES: PROVIDE 300 POUND PULL WIRE OR NYLON EQUIVALENT IN ALL INTERIOR EMPTY CONDUIT

RUNS. PROVIDE 1/4" DIA NYLON PULL ROPE IN EACH EMPTY EXTERIOR CONDUIT OR DUCT.

H.

COORDINATE WITH MECHANICAL CONTRACTOR TO AVOID CONFLICTS BETWEEN DUCT WORK, SUPPLY &

EXHAUST DIFFUSERS, LIGHTING, SOUND SYSTEMS, AND FIRE ALARM SYSTEM FIXTURES.

I.

ELECTRICAL CONTRACTOR SHALL GUARANTEE THE ELECTRICAL WORK TO BE FREE FROM DEFECTS IN

MATERIALS AND WORKMANSHIP FOR A PERIOD OF TWO YEARS FROM DATE OF FINAL ACCEPTANCE.

J.

VERIFY THE EXACT LOCATION AND ELEVATION OF ALL ELECTRICAL EQUIPMENT PRIOR TO ROUGH-IN.

FINAL CONNECTIONS OF EQUIPMENT SHALL BE PER MANUFACTURERS APPROVED WIRING DIAGRAMS,

DETAILS, AND INSTRUCTIONS. THE ELECTRICAL CONTRACTOR SHALL PROVIDE MATERIALS AND

EQUIPMENT COMPATIBLE WITH EQUIPMENT ACTUALLY SUPPLIED.

NOTE: COORDINATE LUMINAIRE LOCATIONS WITH ARCHITECTURAL REFLECTED CEILING PLANS.

K.

ORDER AND/OR RELEASE ORDERED MATERIALS PROMPTLY AFTER SUBMITTAL APPROVAL. NO

SUBSTITUTIONS OR ALTERNATE METHODS OF INSTALLATION WILL BE ACCEPTED FOR FAILURE TO ORDER

MATERIALS IN A TIMELY FASHION.

L.

OBTAIN WRITTEN APPROVAL FROM THE ENGINEER OF ALL SHOP DRAWINGS AND MANUFACTURERS DATA

FOR PANEL BOARDS, TRANSFORMERS, WIRING DEVICES, ETC. BEFORE RELEASING ORDERED MATERIALS.

SUBMITTAL DATA SHALL INDICATE THAT THE CONTRACTOR HAS REVIEWED THE INFORMATION THEREIN

AND THAT THE PROPOSED EQUIPMENT WILL MEET THE PHYSICAL CONSTRAINTS AT THE JOB SITE. ANY

SUBSTITUTIONS SHALL BE OF THE EQUIVALENT OR BETTER QUALITY THAN THE SPECIFIED COMPONENTS.

M.

TYPE MC OR TYPE AC CABLE SHALL ONLY BE USED WITH THE SPECIFIC WRITTEN PERMISSION OF THE

PROGRAM/PROJECT MANAGER. ENT TYPE CONDUIT IS NOT ALLOWED.

N.

CONDUIT/CONDUCTOR RUNS SHOWN ARE DIAGRAMMATICAL ONLY. THE BEST FINAL CONDUIT ROUTING

SHALL BE AS DETERMINED BY THE ELECTRICAL CONTRACTOR AT THE TIME OF CONSTRUCTION.

O.

ALL WIRE SHALL BE COPPER. MINIMUM SIZE FOR POWER WIRING SHALL BE #10 AWG. STRANDED UNLESS

OTHERWISE NOTED. MINIMUM SIZE FOR CONTROL WIRING SHALL BE #14 AWG.

P.

PROVIDE ALL PANEL BOARDS WITH TYPED DIRECTORIES INSTALLED UNDER A CLEAR PLASTIC COVER.

SUBMIT DIRECTORY INFORMATION TO THE OWNER FOR APPROVAL PRIOR TO FINALIZATION.

Q.

SERIES RATING OF UPSTREAM OR DOWNSTREAM CIRCUIT BREAKERS OR FUSES IS PROHIBITED. ONLY

FULLY RATED SYSTEM COMPONENTS WILL BE ACCEPTED.

R.

ALL PANEL BOARDS, SWITCHES, MOTOR STARTERS, AND SWITCHBOARD CIRCUIT BREAKERS SHALL HAVE

ENGRAVED MICARTA NAMEPLATES.

S.

ALL CIRCUITS THAT SHARE A NEUTRAL SHALL BE PROVIDED WITH MULTIPOLE BREAKER.

200 S. ORANGE AVENUE

SUITE 600

ORLANDO, FL 32801

PHONE: 407.898.1511

REGISTRY NO. 35106

2025 ©

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

JIMMY NGUYEN

PE 91973

ARCH/ENGR OF RECORD

DESIGNED BY

JN

DRAWN BY

SRM

ISSUE DATE

11/18/2025

AE PROJECT NUMBER

145642001

SHEET TITLE

ELECTRICAL SITE PLAN

DRAWING NO.

E100

1

(EX)

CH-1

4

CH-1

HVAC EQUIP

COUURT

13-0018

KEYNOTES

1 ELECTRICAL CONTRACTOR SHALL DEMOLISH FUSES AND

EQUIPMENT FEEDERS FROM CH-1 TO DISC SW. ELECTRICAL

RACEWAYS AND DISC SW SHALL REMAIN IN PLACE AND BE

PROTECTED DURING ALL PHASES OF CONSTRUCTION.

2 ELECTRICAL CONTRACTOR SHALL DEMOLISH EXISTING

125A, 480V/3P CKT BKR FROM PANEL EPP 3737. FEEDERS

AND RACEWAY SHALL REMAIN IN PLACE AND BE

PROTECTED DURING ALL PHASES OF CONSTRUCTION.

MEGGER TESTING SHALL BE PERFORMED BY A

NETA-CERTIFIED TECHNICIAN TO VERIFY THE EXISTING

FEEDERS ARE SUFFICIENT AND ACCEPTABLE FOR REUSE.

ELECTRICAL CONTRACTOR SHALL PROVIDE FEEDER

LENGTHS TO ENGINEER OF RECORD.

3 ELECTRICAL CONTRACTOR SHALL PROVIDE 150A, 480V/3P

CKT BKR IN PANEL EPP 3737 AND RECONNECT EXISTING

FEEDERS.

4 ELECTRICAL CONTRACTOR SHALL INSTALL 150A FUSES AND

EXTEND FEEDERS FROM DISC SWITCH TO CH-1. ELECTRICAL

CONTRACTOR SHALL PROVIDE FEEDER LENGTHS TO

ENGINEER OF RECORD.

200 S. ORANGE AVENUE

SUITE 600

ORLANDO, FL 32801

PHONE: 407.898.1511

REGISTRY NO. 35106

2025 ©

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

ELEC ETR 0605

ELEC ETR 0604 ELEC EPP 3730

ELEC EPP 3734

ELEC EPP 3733

ELEC EPP 3731

ELEC EPP 3732

ELEC EPP 3735

2 ELEC EPP 3737

1

ELECTRICAL DEMO ENLARGED PLAN

3/8" = 1'-0"

MECHANICAL

13-0013

CUSTODIAL

13-0015

ELEC ETR 0605

ELEC ETR 0604 ELEC EPP 3730

ELEC EPP 3731

ELEC EPP 3734

ELEC EPP 3733

ELEC EPP 3732

ELEC EPP 3735

ELECT.

13-0012

3 ELEC EPP 3737

SYSTEMS

13-0014

2

ELECTRICAL NEW ENLARGED PLAN

3/8" = 1'-0"

JIMMY NGUYEN

PE 91973

ARCH/ENGR OF RECORD

DESIGNED BY

JN

DRAWN BY

SRM

ISSUE DATE

11/18/2025

AE PROJECT NUMBER

145642001

SHEET TITLE

POWER PLAN

DRAWING NO.

E101

Commodity Codes

• NAICS 238220Plumbing, Heating, and Air-Conditioning Contractors

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.