Project Information

Bid Title

D1 Virginia HQ ? SIT Services

Issuing Agency

State Government of Minnesota

Location

Minnesota

Published Date

Jun 1, 2026

Closing Date

Jun 25, 2026

Government Level

State & Local

Status

Closed

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

D1 Virginia HQ – SIT Services

Brief Description: MnDOT requests letters of interest for Special Inspections and Testing (SIT) Services for Virginia Headquarters (HQ) that is in process of preparing for the erecting of new buildings in varied areas of the existing site. SIT services are required at different intervals to ensure proper installation. The goal of this project is to provide comprehensive SIT services to ensure that all building construction activities comply with applicable building codes, project specifications, and approved construction documents. These services are intended to verify that critical structural, architectural, civil, and life-safety components are constructed in accordance with design intent, quality standards, and regulatory requirements.

Date posted: 06/01/2026
Due date: 06/25/2026

• Announcement
• Scope of Work
• TGB/VET Special Provisions
• Official List : In order to submit a letter of interest to this project, consultants must be pre-qualified in the following work types:
  
  • 24.4 Building Geotechnical Studies and Materials Testing and Special Inspection

Attachment Preview

1.0 Preliminary Design

1.12 Environmental Documentation – Class II Actions

1.13 Environmental Documentation – Class III Actions

1.21 Geometric Layouts – Level 1

1.22 Geometric Layouts – Level 2

2.0 Highway Design

2.11 Highway Design – Level 1

2.12 Highway Design – Level 2

2.13 Highway Design – Level 3

3.0 Bridge Design

3.11 Bridge and Structure Design – Level 1

3.12 Bridge and Structure Design – Level 2

3.13 Bridge and Structure Design – Level 3

3.14 Bridge and Structure Design – Level 4

4.0 Bridge Inspection

4.1 Structural Metals Inspection

4.4 High Mast Light Tower Weld Inspection

5.0 Environmental Studies

5.2 Air Quality Analysis

5.3 Noise Analysis & Abatement Design

5.4 Contaminated Property Investigation – Level I

5.51 Wetland Services – Level 1

5.52 Wetland Services – Level 2

5.53 Wetland Services – Level 3

6.0 Materials Testing

6.1 Geotechnical Studies

6.2 Highway Materials Testing

6.31 Geotechnical Laboratory Testing – Level 1

6.32 Geotechnical Laboratory Testing – Level 2

6.4 Vibration Analysis & Monitoring

6.5 Pile Load Testing

6.6 Standard Penetration & Rock Coring

6.7 Cone Penetration Test

6.8 Solid Stem Auger Drilling

6.9 Soils Analysis & Recommendations

6.10 Ground Penetration Radar Survey

6.11 Geotechnical Instrumentation

7.0 Transportation Planning

7.11 Planning – Class I

7.12 Planning – Class II

7.13 Planning – Class III

8.0 Right of Way Assistance

8.1 Direct Purchase

8.2 Relocation Assistance – Level 1

8.3 Field Title Investigation

8.4 Title Services

8.51 R/W Appraisals – Level 1

8.52 R/W Appraisals – Level 2

9.0 Land Surveys

9.11 Geodetic Control Surveying – Level 1

9.12 Geodetic Control Surveying – Level 2

9.13 Geodetic Control Surveying – Level 3

9.14 Geodetic Control Surveying – Level 4

9.2 Legal Description Preparation

9.3 Production of Right of Way Acquisition Plats

9.4 Design/Location Surveys

9.5 Right-of-Way Surveys

9.6 Land Surveys

10.0 Photogrammetric Mapping and Aerial Imagery

10.1 Photogrammetric Mapping

10.2 Aerial Imagery and Remote Sensing

11.0 Construction Inspection / Contract Administration

11.1 Construction Inspection Grading and Base, Bituminous and

Concrete

11.2 Construction Inspection Bridge Construction

11.3 Construction Surveying

11.4 Materials Sampling & Testing- Field Sampling and Testing

11.5 Materials Sampling & Testing- Plant Inspection/Bituminous

11.6 Materials Sampling and Testing- Plant Inspection/Concrete

11.7 Construction Contract Administration & Management

11.8 ADA Construction Inspection

12.0 Cultural Resources

12.11 Archaeological Work

12.12 Historic Archaeological Work

12.3 Geomorphology Studies

12.41 Architectural/History Studies (Identification/Evaluation Survey)

12.42 Architectural/History Studies (Historic Property Reg/Document)

12.5 Historic Architect Services

13.0 Hydraulic Structure Inspection, Location and Repair

13.1 Detailed Inspection/Location of Stormwater System Features

13.2 Video Inspection of Stormwater System Features

13.3 Cleaning of Stormwater System Features

14.0 Traffic Engineering

14.1 Traffic Signal Design

14.2 Traffic Signal Operations

14.3 Roadway Lighting Design

14.41 Temporary Traffic Control Plan Design & Special Provisions – Level 1

14.42 Temporary Traffic Control Plan Design & Special Provisions – Level 2

14.43 Temporary Traffic Control Plan Design & Special Provisions – Level 3

14.61 Signing Plan Design & Special Provisions – Level 1

14.62 Signing Plan Design & Special Provisions – Level 2

14.63 Signing Plan Design & Special Provisions – Level 3

14.7 Traffic Engineering Special Studies

14.81 Freeway Modeling – Level 1

14.82 Freeway Modeling – Level 2

14.83 Freeway Modeling – Level 3

15.0 Subsurface Utility Engineering

15.1 Subsurface Utility Engineering

16.0 Value Engineering

16.1 Value Engineering Study/Workshop

17.0 Roundabouts

17.1 Roundabout Design

18.0 Transportation Landscape Architecture

18.1 Transportation Landscape Architecture

19.0 Asbestos and Regulated Waste

19.1 Asbestos Regulated Material Assessment & Removal Oversight

19.2 Asbestos Abatement and Peeling Lead Paint Encapsulation

19.3 Regulated Waste Removal

19.4 Asbestos Containing Waste Material Management Oversight

19.5 Asbestos Containing Waste Material Abatement and Mgmt.

20.0 Project Management

20.11 Preconstruction – Level 1

20.12 Construction – Level 2

20.13 Contract Time Determination – Level 3

21.0 Public Engagement and Communications

21.1 Communications and Public Engagement Project Mgmt.

21.3 Marketing and Advertising Services

21.4 Digital Multimedia Production

21.5 Graphic Design

22.0 Transportation Research & Innovation Assistance (TRIA)

22.1 TRIA: Technology Transfer Activities

22.2 TRIA: Program Support

22.3 TRIA: Data Analysis and Implementation

22.4 Library Support Services

23.0 Document Review

23.11 Document Review Services – Level 1

23.12 Document Review Services – Level 2

23.21 Document Scanning and Data Processing Services – Level 1

23.22 Document Scanning and Data Processing Services – Level 2

23.31 Data Input Services – Level 1

23.32 Data Input Services – Level 2

23.4 Hosted Document Review Services

24.0 Building Services

24.1 Building Planning and Scoping

24.21 Architectural Design

24.22 Civil Engineering

24.23 Electrical Engineering

24.24 Mechanical Engineering

24.25 Structural Engineering

24.31 Heating, Ventilation, and Air Conditioning (HVAC) Commissioning

24.32 HVAC Test and Balance (TAB) Services

24.33 Building Automation Systems (BAS) Commissioning and Technical Service

24.4 Building Geotechnical Studies and Material Testing and Special Inspection

24.51 Water, Wastewater and Subsurface Sewage Treatment System Services – Level 1

24.52 Water, Wastewater and Subsurface Sewage Treatment System Services – Level 2

24.53 Water, Wastewater and Subsurface Sewage Treatment System Services – Level 3

24.6 Owners Representative and Construction Contract Administration

PRE-QUALIFICATION ANNOUNCEMENT

Minnesota Department of Transportation (MnDOT)

D1 Virginia HQ – SIT Services

MnDOT Contract No. 1063348

Minnesota’s Commitment to Diversity and Inclusion

The State of Minnesota is committed to diversity and inclusion in its public procurement process. The goal is to

ensure that those providing goods and services to the state are representative of Minnesota’s communities and

include businesses owned by minorities, women, veterans and those with substantial physical disabilities. Creating

broader opportunities for historically under-represented groups provides for additional options and greater

competition in the marketplace, creates stronger relationships and engagement within the state’s communities and

fosters economic development and equality.

To further this commitment, the Minnesota Department of Administration operates a program for Minnesota-

based small businesses owned by minorities, women, veterans and those with substantial physical disabilities. For

additional information on this program, or to determine eligibility, please call 651-296-2600 or go to

www.mmd.admin.state.mn.us/mn02001.html.

This document is available in alternative formats for persons with disabilities by calling Daniel Duffy at 651-366-4606 or for

persons who are hearing, or speech impaired by calling the Minnesota Relay Service at 1-800-627-3529. For other

information on disability rights and protections, contact MnDOT’s Americans with Disabilities Act (ADA) Coordinator.

This request for letters of interest does not obligate MnDOT to award a contract or complete the project, and MnDOT

reserves the right to cancel the Announcement if it is considered to be in its best interest.

As of July 1, 2025, certain terms are unenforceable in state contracts. See Minnesota Statutes §16C.05 subdivision 8.

PROJECT SPECIFIC INFORMATION

Project Overview

MnDOT requests letters of interest for Special Inspections and Testing (SIT) Services for Virginia Headquarters (HQ) that is

in process of preparing for the erecting of new buildings in varied areas of the existing site. SIT services are required at

different intervals to ensure proper installation.

Project Goal

The goal of this project is to provide comprehensive SIT services to ensure that all building construction activities comply

with applicable building codes, project specifications, and approved construction documents. These services are intended

to verify that critical structural, architectural, civil, and life-safety components are constructed in accordance with design

intent, quality standards, and regulatory requirements.

Scope of Work and Deliverables

See Exhibit A: Specifications, Duties, and Scope of Work, posted separately from this RFP, for the full scope of work.

Additional documents that are posted separately from this RFP:

1. FOR POSTING: BID PACKAGE 3

2. FOR POSTING: BID PACKAGE 3 ADDENDUM 1

3. FOR POSTING: BID PACKAGE 3 ADDENDUM 2

(CSS/CM Last Updated 05/05/2026)

2

4. FOR POSTING: BID PACKAGE 3 DRAWINGS

Quality Management Plan (QMP) and Quality Assurance and Quality Control (QA/QC) Procedures.

The successful responder will develop a project specific QMP that specifies how Contractor will perform QA/QC activities

throughout the duration of the project to ensure delivery of a quality product in a timely manner that conforms to

established contract requirements. The successful responder will be required to submit the project specific QMP to State’s

Project Manager for approval within five business days of Notice to Proceed.

Responder Requirements

The "Official List," identifies the consultants who are eligible to submit for this specific project. In order to be eligible as a

responder to submit a letter of interest to this project, the prime consultant must:

1. Be pre-qualified in at least of one work type identified on the project,

2. Be pre-qualified at the time the project is posted,

3. Add value to the project, and

4. Appear on the Official List posted with the project.

If the responder meets the eligibility requirements above but is not pre-qualified for the remaining work types deemed

necessary for project, they must make arrangements to subcontract with firms that are pre-qualified in those work types.

When applicable, the responder must identify in the letter of interest their sub-consultant(s), and which work type(s) the

sub-consultant(s) will be completing. If there are not firms currently listed on the "Official List" for an identified work

type(s), the responder may provide the work themselves, or they may subcontract with any firm.

QUESTIONS

Prospective, pre-qualified responders who have any questions regarding this Announcement must submit questions, by e-

mail, to the Contract Administrator:

Daniel Duffy, Contract Administrator

Daniel.duffy@state.mn.us

IMPORTANT: Use the following as the subject line of your email: MnDOT Contract No. 1063348, D1 Virginia HQ – SIT

Services.

All questions and answers will be posted, verbatim, on MnDOT’s Consultant Services Web Page, at:

http://www.dot.state.mn.us/consult/notices.html. Potential pre-qualified responders are responsible for checking the web

page for any addendums to this announcement and any questions that have been answered.

Questions regarding this Announcement must be received, via e-mail, by the Contact Administrator identified above no

later than 2:00 pm Central Time, on 06/11/2026.

MnDOT anticipates posting answers to all questions received by 2:00 pm Central Time, on 06/15/2026.

No other MnDOT personnel are allowed to discuss this Announcement before the letter of interest submission deadline.

Contact regarding this announcement with any personnel not listed above could result in disqualification.

LETTER OF INTEREST CONTENT AND FORMAT

The letter of interest must adhere to the following format. Items 1 through 5 must fall within the Letter of Interest page

limit identified in the “Page Limits” table below.

1. Contact Information

The purpose of this section is for the responders to identify their contact information. Responder’s must list the company’s

full legal name, business address, contact person’s name and title, telephone number, fax number and e-mail address (as

available).

3

2. Eligibility

The purpose of this section is for responders to confirm that they, and (if applicable) their subcontractor(s) are pre-qualified

in the required work type(s).

3. Project Understanding

The purpose of this section is for the responders to demonstrate their understanding of the project. Responders must

clearly state their understanding of the project objectives, goals, and tasks to show or demonstrate their view of the nature

of the project. Responders should demonstrate their understanding by using their own words rather than simply repeating

what is listed in the announcement.

4. Work Plan – Project Approach

The purpose of this section is for responders to present their work plan. Responders must provide a detailed work plan,

which must identify the major tasks to be accomplished. Responders must be sure to not only describe what will be done

but explain how each task will be accomplished. These tasks will be used as a scheduling and management tool, as well as

the basis for invoicing. The detailed work plan must present:

a. The Overall Project Approach

b. A Breakdown of the Project Tasks, detailing the tasks, and how they will be completed

c. Deliverable Due Dates and an Overall Project Schedule

d. A List of Personnel Working on the Project, including details of each person’s role, by task

Artificial Intelligence. In its breakdown of each Project Task, responders must also disclose whether it intends to use any

artificial intelligence technologies, either directly or indirectly, to accomplish Project Tasks and if so, a detailed description

of such technologies and how they will be used. See “General Requirements” below for additional information regarding

the use of artificial intelligence.

5. Deliverables

Responders must provide a clear and detailed description, format, and schedule of the deliverables to be provided in order

to meet the needs of the project.

6. Forms, Documents and Certifications

Responders must complete and submit all required forms, documents, and certifications, required under any other section

of this Announcement. These forms, documents and certifications will NOT be included in any page limit set for this

Announcement, as applicable.

6.1. Required Forms and Documents

Responders must complete and submit the forms and documents required under any other section of this

Announcement.

Forms/Documents on File with MnDOT Consultant Services:

If applicable, check the forms/documents that are on file with MnDOT Consultant Services:

☐ Workforce and Equal Pay Declaration Page ☐ Resident Vendor Form

If these forms/documents are on file with MnDOT Consultant Services, then no need to resubmit the

documents until the form/document end date. All other forms and documents required MUST be attached to

response.

6.2. Solicitation of Targeted Group Business (TGB) Firms Statement: Responders must provide the following

statement and signature:

I hereby recognize that a 0.0% TGB goal has been established for this Announcement in accordance with the

Special Provisions posted with the Announcement. I understand that MnDOT’s Office of Civil Rights is required

to clear the successful responder’s attainment of the goal, or Good Faith Efforts made to attain the goal, before

a contract can be awarded. I understand that failure to meet the goal or show a Good Faith Efforts to meet the

goal, will deem the successful responder as non-responsive, resulting in rejection of the letter of interest.

4

Signature

Print Name

Date

6.3. Solicitation of Veteran-Owned Small Businesses Statement: Responders must provide the following statement

and signature:

I hereby recognize that a 0.0% Veteran goal has been established for this Announcement in accordance with

the Special Provisions posted with the Announcement. I understand that MnDOT’s Office of Civil Rights is

required to clear the successful responder’s attainment of the goal, or Good Faith Efforts made to attain the

goal, before a contract can be awarded. I understand that failure to meet the goal or show a Good Faith Efforts

to meet the goal, will deem the successful responder as non-responsive, resulting in rejection of the letter of

interest.

Signature

Print Name

Date

PAGE LIMITS

The responder’s submittal must adhere to the page limitations identified in the following table. If any of the responder’s

documents exceed the page limits identified, the excess pages will not be reviewed, regardless of content.

Document

Maximum Number of Requirements

Pages

Requirement for all N/A

1. Responders MUST use Calibri font in their response

pages

2. No smaller than 11-point font and single line, 0-point spacing

3. The font may not have condensed, narrow, or compressed in the

font name

Letter of Interest

7 pages

1. Single-sided pages, no larger than 8.5”x11”

2. As noted above, Item’s 1 through 6 of the Letter of Interest

Content and Format section must fall within these page limits

Note: Cover letter and required forms and certifications are NOT included as part of the page limit.

RESPONSE SUBMITTAL INSTRUCTIONS

IMPORTANT NOTE TO RESPONDERS: You should receive a confirmation email from MnDOT. If you do not, please reach

out to the Contract Administrator to ensure the response was received.

All responses must be electronically submitted, via e-mail, to the attention of:

Daniel Duffy, Contract Administrator

Daniel.duffy@state.mn.us

Copy Consultant Services Forms Inbox: ProfessionalTechnicalContractForms.dot@state.mn.us

IMPORTANT: Use the following as the subject line of your email: MnDOT Contract No. 1063348, D1 Virginia HQ – SIT

Services.

All responses must be received by MnDOT no later than 2:00 pm Central Time, on 6/25/2026.

RESPONSE EVALUATION

Representatives of MnDOT will evaluate all letters of interest received by the deadline. In some instances, an interview may

be part of the evaluation process. A 100-point scale will be used to create the final evaluation recommendation. The factors

and weighting on which letters of interest will be judged are broken down in the following table:

Rating Factor

Project Understanding

Work Plan – Project Approach

Deliverables

Weighting Percentage

60%

30%

10%

5

Commodity Codes

• NAICS 337214Office Furniture (except Wood) Manufacturing

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.