Project Information

Bid Title

19496 CDBG-SC 24 - UNIVERSITY BLVD. REHABILITATION

Issuing Agency

Durant city

Location

Oklahoma

Published Date

Jan 2, 2026

Closing Date

Jan 23, 2026

Government Level

State & Local

Status

Closed

Ref. #

C-2024-67

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Bid Number:	C-2024-67
Bid Title:	19496 CDBG-SC 24 - UNIVERSITY BLVD. REHABILITATION
Category:	Grants Office Bids
Status:	Open
Bid Recipient:	CITY OF DURANT

Description: Project Description: To rehabilitate two key intersections and improve approximately 4,620 linear feet of street along sections of University Blvd, beginning at 6th Ave. extending up to Bryan Drive, with the 7th Ave. and 12th Ave. having the most significant wear and tear. The rehabilitations would be completed in 2 phases, only closing off one lane at a time, to minimize road closures, detours and traffic jams. Refer to Exhibit A – Project Maps Please refer to the Bid Packet Attachment for Additional Details. Publication Date/Time: 1/2/2026 8:00 AM Publication Information: ADVERTISEMENT FOR SEALED BIDS 19496 CDBG-SC 24 Closing Date/Time: 1/23/2026 10:00 AM Bid Opening Information: FRIDAY, JAN 23, 2026 10AM Addendum Date/Time: 1/2/2026 Contact Person: For further information, or to schedule a Pre-bid site visit, please contact Phillip Hightower at (580) 931-6657 or at phightower@durant.org Download Available: Refer to Related Documents Fee: None Business Hours: Mon-Fri; 8AM-5PM Qualifications: Current Sam.gov registration Special Requirements: Project will adhere to grant guidelines including Federal Wage Rates (Davis-Bacon) and Build America Buy America Act (BABAA). Miscellaneous: 1/2/2026 Please refer to Addendum No. 1 attachment Thank you! Related Documents: 19496 CDBG-SC 24 UNIV. BLVD BID PACKET Exhibit D - Form 407.6 19496 CDBG-SC 24 UNIV. BLVD BID PACKET Exhibit C - Form 407.2 19496 CDBG-SC 24 UNIV. BLVD BID PACKET Exhibit B - OK20250020_HWY_Mod_1_12.12.25 19496 CDBG-SC 24 UNIV. BLVD BID PACKET Exhibit A - Project Maps 19496 CDBG-SC 24 UNIV. BLVD BID PACKET UNIV BLVD REHAB ADDENDUM NO.1

Attachment Preview

Oklahoma Department of Commerce

Community Development Block Grant (CDBG) Program

BIDDER’S ACKNOWLEDGEMENT & CERTIFICATION FOR

COMPLIANCE WITH BUILD AMERICA-BUY AMERICA (BABA)

IRON & STEEL & SPECIFICALLY LISTED CONSTRUCTION MATERIALS 2023-2024

(Submit with the Bid)

This is a certification that I, the bidder,

(Name and Title) of

(Company Name, Partnership, LLC, Inc., etc.)

hereby certify and is aware that the funds appropriated or otherwise made available by the Infrastructure

Investment and Jobs Act in effect as of May 14, 2022, and used for purchase of Iron and Steel, waived by the

Department of Housing and Urban Development on December 14, 2022, for CDBG Project funding allocated

after November 13, 2022, to the State of Oklahoma and for a period of five years or such shorter time period as

HUD may announce via Notice, shall be used for a project as being at the de minimis threshold amount of

$250,000 for the construction, alteration, maintenance, or repair of a public improvement certifying that all of

the Iron and Steel products and Construction Materials used in the project are produced in the United States.

The Bidder is aware that all iron and steel products and specifically listed materials used for this project must

be produced in the United States per Section 436(a)-(f) of the Consolidated Appropriations Act, 2014, and

incorporated into this project:

____________CP_ri_toy_je_o_cf_tD__u_ra_n__t:_U__n_iv_e_r_s_i_ty__B_lv_d__. _R_e_h_a_b__ili_ta__ti_o_n________________ (Insert Name of Project),

CDBG Project #__1_9_4_9_6__C_D_B_G__-S_C__2_4___________ (Insert CDBG Project Number), and furthermore certifies as

24

follows:

1. The bidder understands the term “iron and steel products” and “specifically listed construction

materials” applies to the construction, alteration, maintenance, or repair of publicly owned

infrastructure.

2. The bidder understands the term “iron and steel products” refers to the following products made

primarily of iron or steel, lined or unlined pipes and fittings, manhole covers and other municipal

castings, hydrants, tanks, flanges, pipe clamps and restraints, valves, structural steel, reinforced

precast concrete, and construction materials. Additional information for review, including any

published waivers, domestic supplier information, “Made in America”, BABA FAQs, as posted on

the HUD.gov website, https://www.hud.gov/program_offices/general_counsel/BABA

3. The bidder further states that this requirement applies to all portions of the project that are

subcontracted.

4. This “Certification” is to be submitted by Bidder as a part of this bid and proposal.

5. Iron and steel of unknown origin are considered to have been produced or manufactured outside

the United States.

6. Identification of American-produced Iron and Steel Goods (AIS) is consistent with the terms of the

Owner’s bid solicitation and the provisions in the bid document. Bidder certifies that this bid

reflects the Bidder’s best, good faith effort to identify domestic sources of iron and steel goods in

the bid solicitation where such American-made goods are available on the schedule and consistent

with the deadlines prescribed in or required by the bid solicitation.

7. Verification of U.S. Production: The bidder certifies that all iron and steel products contained in the

bid solicitation that are American-made have been so identified, and if this bid is accepted, the

Bidder agrees that it will provide reasonable, sufficient, and timely verification to the Owner of the

U.S. production of each component so identified.

8. Documentation Regarding Non-American-made Iron and Steel Goods: The Bidder certifies that for

any iron and steel products that are not American-made and are so identified in this bid, the Bidder

has included in or attached to this bid one or both of the following a) or b) as applicable:

a) Identification of and citation to a categorical waiver published by the U.S. Department of

Housing and Urban Development (DHUD) in the Federal Register that is applicable to

such component or components, and an analysis that supports its applicability to the

component or components; If the Owner/State receives a request for a waiver under this

section, the Owner/State shall allow for 15 working days for review prior to a

determination based on the request.

b) Verifiable documentation sufficient to the Owner/State, as required in the bid

solicitation or otherwise, that the Bidder has sought to secure American-produced goods

but has determined that such goods are not available on the bid schedule and consistent

with the deadlines prescribed in the bid solicitation, with assurance adequate for the

Bidder under the applicable conditions stated in the bid solicitation or otherwise.

9. Information and Detailed Justification Regarding Non-American-produced Iron and Steel Goods: The

Bidder certifies that for any such product or products that are not so available, the Bidder has also

provided in or attached to this bid certification, including but not limited to the verifiable

documentation and a full description of the bidder’s efforts to secure any such American-produced

iron and steel goods, that the Bidder believes are sufficient to provide and as far as possible

constitute the detailed justification required for a waiver under Use of American Iron and Steel with

respect to such product or products.

10. If use of a noncompliant iron and/or steel product is permanently incorporated into a project, one

or more of the following can occur:

1) Request a waiver where appropriate;

2) Require the removal of the nondomestic item;

3) Payment for all or part of the project will be withheld.

11. The Bidder further agrees that, if the bid is accepted, will assist the Owner/State in amending,

supplementing, or further supporting such information as required by the Owner/State to request

and, as applicable, implement the terms of a waiver with respect to any such product or products.

12. Supporting Documentation of BABA Products & Materials is required as submittals to the

Owner/State for compliance.

__________________________

Name of Construction Company

________________________________

Signature of Company Representative

____________

Date

_______C__it_y_o__f _D_u_r_a_n_t_______

Name of Owner/CDBG Grantee

________________________________

Signature of Authorized Official

____________

Date

NOTE: OWNER signs and submits this document with the Notice of Contract Award Form in OKGrants.

Form 407.6

11/2023

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.