Project Information

Bid Title

Horizon Elementary - Replace Chiller Bldg. 11

Issuing Agency

Volusia County Schools

Location

Florida

Published Date

Feb 4, 2026

Closing Date

Feb 19, 2026

Government Level

State & Local

Status

Closed

Ref. #

Project No. 2648221

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Horizon Elementary - Replace Chiller Bldg. 11 - Project No. 2648221

Mandatory Prebid Meeting:	February 4, 2026 at 10:00 AM
Bid:	February 19, 2026 at 1:00 PM
Project Bid Documents:	Plans Project Manual Prebid Sign-in Sheets
Estimate:	$325,000
Consultant:	BCER Engineering, Inc. Joe Berkebile (321) 241-4142
Owner:	VCS Project Manager Robert Larkin (386) 947-8786
Bid Status:	Active

Attachment Preview

VOLUSIA

COUNTY SCHOOLS

"LEADING WITH GRACE AND RESPECT"

THE SCHOOL BOARD OF VOLUSIA

COUNTY FLORIDA

200 North Clara Avenue

DeLand, Florida 32720

HORIZON ELEMENTARY

REPLACE CHILLER

BLDG. 11

VCS Project NO. 2648221

4751 Hidden Lake Dr., Port Orange, FL 32129

DESCRIPTION OF WORK

REPLACE THE CHILLER, PIPING AND ACCESSORIES EXTERIOR OF THE BUILDING.

Engineer's Statement of Compliance

To the best of my knowledge, these drawings and the project manual are complete and comply with

the Florida Building Code.

BUILDING DATA

A. SURVEY PARCEL ID

B. LEGAL DESCRIPTION

C. OCCUPANCY TYPE

D. CONSTRUCTION TYPE

E. RISK CATEGORY

F. AUTOMATIC SPRINKLER

G. BUILDING AREA

H. BUILDING HEIGHT

I. OCCUPANT LOAD

XXX

XXX

XXX

TYPE XXX

XXX

XXX

XXX

XXX

XXX

LOCATION MAP

ENGINEERS & CONSULTANTS

MECHANICAL & ELECTRICAL

BCER ENGINEERING, INC.

6555 N. Wickham Rd, Suite 104

Melbourne, FL 32940

727.800.7314

DAVID WALLACE

dwallace@bcer.com

www.bcer.com

BCER PROJECT 145425001

DRAWING LIST

00 - GENERAL

G000

COVER SHEET

23 - MECHANICAL

M001

MECHANICAL GENERAL INFORMATION

M002

MECHANICAL SCHEDULES

MD101 LEVEL 1 MECHANICAL DEMOLTION PLAN

M101

LEVEL 1 MECHANICAL PLAN

M501

MECHANICAL DETAILS

26 - ELECTRICAL

E001

ELECTRICAL GENERAL INFORMATION

E002

ELECTRICAL PROJECT NOTES

ED101

LEVEL 1 POWER DEMOLITION PLAN

E101

LEVEL 1 POWER PLAN

E601

ELECTRICAL ONE-LINE DIAGRAM

TOTAL # OF SHEETS: 11

SCHOOL BOARD

MEMBERS

JAMIE HAYNES

RUBEN COLON

KRISTA GOODRICH

JESSIE THOMPSON

DONNA BROSEMER

DR. CARMEN J. BALGOBIN

BOARD CHAIR

VICE BOARD CHAIR

MEMBER

MEMBER

MEMBER

SUPERINTENDENT

BCER PROJECT 145425001

PROGRESS - NOT FOR

CONSTRUCTION

NOT TO SCALE

Construction Documents 11.12.2025

ARCH/ENGR OF RECORD

EOR

BCER Engineering

DESIGNED BY

BCER

DRAWN BY

BCER

ISSUE DATE

11/12/2025

AE PROJECT NUMBER

145425001

SHEET TITLE

COVER SHEET

DRAWING NO.

G000

AFF

AP

BBD

BOD

BOP

CL EL.

DIA, D, Ø

EA

I.E.

MA

MD

MVD

NC

NIC

NO

OA

RA

REL

SA

MECHANICAL LEGEND

ALL SYMBOLS IN LEGEND MAY NOT NECESSARILY BE USED ON THIS PROJECT

ABBREVIATIONS AND DESCRIPTIONS

ABOVE FINISHED FLOOR

ACCESS PANEL

BAROMETRIC

BACKDRAFT DAMPER

BOTTOM OF DUCT

BOTTOM OF PIPE

CENTER LINE ELEVATION

DIAMETER

EXHAUST AIR

INVERT ELEVATION

MIXED AIR

MOTORIZED DAMPER

MANUAL VOLUME DAMPER

NORMALLY CLOSED

NOT IN CONTRACT

NORMALLY OPEN

OUTSIDE AIR

RETURN AIR

RELIEF AIR

SUPPLY AIR

TCEAD

TCOAD

TCRAD

TCP

TYP

UNO

VTR

(N)

(E)

(R)

(F)

TEMPERATURE CONTROL

EXHAUST AIR DAMPER

TEMPERATURE CONTROL

OUTSIDE AIR DAMPER

TEMPERATURE CONTROL

RETURN AIR DAMPER

TEMPERATURE CONTROL

PANEL

TYPICAL

UNLESS NOTED OTHERWISE

VENT THROUGH ROOF

NEW

EXISTING

RELOCATED

FUTURE

EXISTING WORK IS

SHOWN AS LIGHT LINES

TO BE DEMOLISHED WORK

IS SHOWN WITH BOLD

DASHED LINES

NEW WORK IS SHOWN AS

BOLD SOLID LINES

EQUIPMENT

TERMINAL

OR VAV BOX

TB-103

650

1.2

N

INDICATES SUPPLY

X#

AND RETURN

PIPING TO UNIT

#

HEATING COIL

TRANSITION TO

SIZE ON PLANS

CONTROL

ENCLOSURE

CONTROL/COIL

ACCESS

EQUIPMENT TYPE

FLOOR #__

IF MULTIPLE

BOX ##__

CFM

GPM

NORTH ARROW

#

X-#

H

X-##

X-###

#

SHEET METAL FITTINGS AND EQUIPMENT

SUPPLY ROUND DUCT DOWN

SUPPLY ROUND DUCT UP

RETURN ROUND DUCT DOWN

RETURN ROUND DUCT UP

EXHAUST ROUND DUCT DOWN

EXHAUST ROUND DUCT UP

SUPPLY DUCT DOWN

SUPPLY DUCT UP

RETURN DUCT DOWN

RETURN DUCT UP

EXHAUST DUCT DOWN

EXHAUST DUCT UP

RADIUS ELBOW

VANED ELBOW

DUCT END CAP

RECTANGULAR 90° TAKEOFF

WITH BEVELED TAP

ROUND 90° CONICAL TAKE OFF

FROM RECTANGLE TRUNK

ROUND 90° CONICAL TAKE OFF

W/ MANUAL VOLUME DAMPER

ROUND DUCT TAP OFF

TOP OF DUCT

BEVELED TAP OFF TOP

F

OF DUCT

SUPPLY AIR DIFFUSER

RETURN OR EXHAUST

REGISTER/GRILLE

UNSHADED AREAS

INDICATE DIRECTION OF

AIR FLOW (IF NO SHADING,

4-WAY OR ADJUSTABLE)

UC

LINEAR SLOT DIFFUSER

CEILING AIR DEVICE

WITH FIRE DAMPER

MANUAL VOLUME DAMPER

RECTANGLE DUCT

RISE/DROP IN PLAN

RECTANGLE TO ROUND

TRANSITION

ROUND DUCT RISE/DROP

IN PLAN

BURIED, UNDERFLOOR

OR UNDER DUCT

M

BD

S

FS

#-#

F

#-#

S

#-#

MOTORIZED DAMPER

MOTOR

BACKDRAFT DAMPER

DUCT SMOKE DETECTOR

FIRE/SMOKE DAMPER (#

REFERS TO SCHEDULE)

FIRE DAMPER

SMOKE DAMPER

FLEXIBLE DUCT

FLEXIBLE DUCT

CONNECTION

WORK NOTE SYMBOL

REVISION SYMBOL

AND CLOUD

DIRECTION OF CUT

SECTION

DESIGNATION

SHEET ON WHICH

SECTION IS LOCATED

ELEVATION

DESIGNATION

DIRECTION OF VIEW

SHEET ON WHICH

ELEVATION IS LOCATED

POINT OF CONNECTION

NEW TO EXISTING

SHEET ON WHICH

DETAIL IS LOCATED

DETAIL NUMBER

BREAK LINE

CONTINUANCE LINE

UNIT HEATER

BASEBOARD HEATER

ACCESS PANEL

SOUND ATTENUATOR

DOOR UNDERCUT

AIR FLOW - POSITIVE

PRESSURE

AIR FLOW - RETURN

OR EXHAUST

AIR FLOW DIRECTION

FAN

FAN

CONTROL WIRE

CD

CDW

CS

CR

CWS

CWR

D

FOS

FOR

FOV

G

HWS

HWR

HRS

HRR

HPS

HPR

LPS

LPR

MPS

MPR

PWS

PWR

RL

RS

RHG

CONDENSATE DRAIN

CONDENSER WATER

(COMMON)

CONDENSER WATER SUPPLY

CONDENSER WATER RETURN

CHILLED WATER SUPPLY

CHILLED WATER RETURN

DRAIN

FUEL OIL SUPPLY

FUEL OIL RETURN

FUEL OIL VENT

GAS

HEATING WATER SUPPLY

HEATING WATER RETURN

HEAT RECOVERY SUPPLY

HEAT RECOVERY RETURN

HIGH PRESSURE STEAM

HIGH PRESSURE STEAM

(CONDENSATE) RETURN

LOW PRESSURE STEAM

LOW PRESSURE STEAM

(CONDENSATE) RETURN

MEDIUM PRESSURE STEAM

MEDIUM PRESSURE STEAM

(CONDENSATE) RETURN

PRE-COOLING WATER SUPPLY

PRE-COOLING WATER RETURN

REFRIGERANT LIQUID

REFRIGERANT SUCTION

REFRIGERANT HOT GAS

FS

FLOW SWITCH

FT

FLOW TRANSMITTER

H

HUMIDITY SENSOR

P

PRESSURE SENSOR

PDS

PRESSURE DIFFERENTIAL

SWITCH

PDT

PRESSURE DIFFERENTIAL

TRANSMITTER

PI

POSITION INDICATOR

DPM

ROOM PRESSURE

MONITOR

PIPING DESIGNATIONS, FITTINGS AND EQUIPMENT

SMS

SMR

NP

CW

SCW

SNOWMELT SUPPLY

SNOWMELT RETURN

NON-POTABLE WATER

POTABLE COLD WATER

SOFT COLD WATER

ARROW PARALLEL TO LINE

INDICATES PITCH

ARROW IN LINE INDICATES

DIRCTION OF FLOW

PIPE REDUCER

ELBOW UP

ELBOW DOWN

TEE UP

TEE DOWN

RISE OR DROP

BRANCH SIDE CONNECTION

BRANCH TOP CONNECTION

BRANCH BOTTOM

CONNECTION

PIPE CAP OR PLUG

FLEXIBLE CONNECTION

EXPANSION JOINT

PIPE ANCHOR

PIPE ALIGNMENT GUIDE

EXPANSION LOOP

BALL VALVE

CALIBRATED BALANCE VALVE

PLUG VALVE

NEEDLE VALVE

SOLENOID VALVE

PRESSURE REDUCING VALVE

2-WAY CONTROL VALVE

3-WAY CONTROL VALVE

CHECK VALVE

GLOBE VALVE

BUTTERFLY VALVE

BALANCING VALVE

CIRCUIT SETTER

GATE VALVE FOR STEAM

UNION

PIPE ANCHOR

PIPE ALIGNMENT GUIDE

2-WAY VALVE

PRESSURE INDEPENDENT

VALVE

GAS PRESSURE REGULATOR

GAS COCK

M

METER

VENTURI

CONTROL DEVICES

PSH

PRESSURE SWITCH HIGH

PSL

PRESSURE SWITCH LOW

HUMIDIFIER

PARALLEL BLADE DAMPER

OPPOSED BLADE DAMPER

T

TEMPERATURE SENSOR

CS

CURRENT SENSOR

DM

DAMPER ACTUATOR

TSH

TEMPERATURE SWITCH HIGH

MS

MOTOR STARTER

TSL

TEMPERATURE SWITCH LOW

S

SENSOR

VFD

VARIABLE FREQUENCY DRIVE

H

HORN

S

DUCT SMOKE DETECTOR

SP

STATIC PRESSURE SENSOR

FS

FLOW SWITCH

PS

PRESSURE SWITCH

AIR FLOW DIRECTION ARROW

#

CONTROL POINT

IN-LINE PUMP

BASE MOUNTED PUMP

PUMP

STRAINER

STRAINER W/BLOWOFF VALVE

STEAM TRAP

TEMPERATURE GAUGE

PRESSURE/TEMPERATURE TAP

WELL

HOSE END BALL VALVE W/ CAP

TEMPERATURE/PRESSURE

RELIEF VALVE

VACUUM BREAKER

AUTOMATIC AIR VENT

MANUAL AIR VENT

PRESSURE GAUGE W/ COCK

GAUGE W/ PIGTAIL

PI

PRESSURE INDICATOR

T

AQUASTAT

MANUAL SWITCH

T

WALL MOUNTED THERMOSTAT

N N - INDICATES NIGHT

S - INDICATES SENSOR

T

UNIT MOUNTED THERMOSTAT

H

HUMIDISTAT

CO

CARBON MONOXIDE SENSOR

CO2 CARBON DIOXIDE SENSOR

INDICATOR LIGHT

COMPLIANCE FOR ASHRAE STANDARD 183

LOCATION:

PORT ORANGE, FL;26 FT. ELEVATION,

29.11 DEGREES LATITUDE, -81.002 DEGREES LONGITUDE.

OUTDOOR CONDITIONS:

SUMMER

WINTER

= 92 DEGREES F / 78 DEGREES (MEAN

COINCIDENT W.B.)

= 42 DEGREES F

INDOOR CONDITIONS:

COOLING = (75) DEGREES F

HEATING = (72) DEGREES F

ENVELOPE CHARACTERISTICS:

GLASS SHADING COEF.

GLASS "U" FACTOR

GLASS LOW-E

GLASS INTERIOR SHADING

WALL INSULATION "R"

ROOF INSULATION "R"

PERIMETER FOUNDATION WALL

INSULATION "R"

= N/A

= N/A

= N/A

= N/A

= N/A

= N/A

= N/A

LOAD CALCULATION METHOD:

COOLING = TETD/TA

HEATING = UATD

ADOPTED/ENFORCED CODES REQUIRED

2023 FLORIDA BUILDING CODE

2023 FLORIDA EXISTING BUILDING CODE

2023 FLORIDA MECHANICAL CODE

2020 NATIONAL ELECTRICAL CODE

AND LOCAL AMENDMENTS

PROJECT NARRATIVE

THE MECHANICAL SCOPE OF WORK FOR THIS PROJECT INCLUDES, BUT IS NOT LIMITED

TO, THE REPLACEMENT OF ONE (1) AIR-COOLED SCROLL CHILLER AND TWO (2)

HYDRONIC PUMPS.

DRAWING LIST - MECHANICAL

M001

MECHANICAL GENERAL INFORMATION

M002

MECHANICAL SCHEDULES

MD101 LEVEL 1 MECHANICAL DEMOLTION PLAN

M101

LEVEL 1 MECHANICAL PLAN

M501

MECHANICAL DETAILS

TOTAL # OF SHEETS: 5

MECHANICAL GENERAL NOTES

1. DRAWINGS AND SPECIFICATIONS ARE COMPLEMENTARY. WHATEVER IS CALLED

FOR IN EITHER IS BINDING AS THOUGH CALLED FOR IN BOTH.

2. DUCT AND PIPE SIZE DIMENSIONS ARE IN INCHES UNLESS NOTED OTHERWISE.

3. THE EQUIPMENT SPECIFIED ON THE DRAWINGS HAVE BEEN SELECTED AS THE

BASIS OF DESIGN. THE USE OF REVIEWED OR SPECIFIED EQUALS SHALL BE

COORDINATED BY THE CONTRACTOR AS TO SPACE REQUIREMENTS, EQUIPMENT

DIMENSIONS AND PERFORMANCE. ANY ADDITIONAL COSTS EITHER DIRECTLY OR

INDIRECTLY CAUSED BY EQUALS SHALL BE THE RESPONSIBILITY OF THE

CONTRACTOR.

4. COORDINATE ALL DIFFUSER AND GRILLE LOCATIONS WITH ARCHITECTURAL

REFLECTED CEILING PLAN, FIRE PROTECTION, AND ELECTRICAL DRAWINGS.

5. DRAWINGS ARE DIAGRAMMATIC AND SHOW THE GENERAL DESIGN INTENT,

ARRANGEMENT AND EXTENT OF SYSTEMS. DO NOT SCALE DRAWINGS NOR USE AS

SHOP DRAWINGS. WHERE ALTERNATE ROUTING, OFFSETS AND TRANSITIONS ARE

REQUIRED FOR FIELD COORDINATION OF ALL TRADES, THIS CONTRACTOR SHALL

MAKE CHANGES WITHOUT ADDITIONAL COSTS.

6. CONTRACTOR SHALL NOT SHUT-OFF/PUT OUT OF SERVICE ANY SYSTEMS/SERVICES

WITHOUT FIRST COORDINATING ALL DOWNTIME WITH OWNER'S PERSONNEL.

CONTRACTOR SHALL PROVIDE A DETAILED M.O.P. AS REQUIRED. DO NOT BEGIN

WORK WITHOUT WRITTEN APPROVAL.

7. ALL EQUIPMENT SHALL BE INSTALLED IN ACCORDANCE WITH MANUFACTURER'S

RECOMMENDATIONS UNLESS SPECIFICALLY DIRECTED OTHERWISE.

8. CONTRACTOR SHALL BE RESPONSIBLE FOR LOCATING AND INSTALLING SLEEVES,

INSERTS AND SUPPORTS AS REQUIRED FOR THIS SCOPE OF WORK AND/OR CORE

DRILL REQUIREMENTS. COORDINATE WITH GENERAL CONTRACTOR AND

STRUCTURAL ENGINEER.

9. CONTRACTOR SHALL CLOSELY COORDINATE NEW MECHANICAL WITH ALL NEW AND

EXISTING MECHANICAL, PLUMBING, ELECTRICAL, FIRE PROTECTION,

ARCHITECTURAL AND STRUCTURAL MEMBERS. REFER TO DIVISION 23

SPECIFICATIONS FOR CEILING SPACE ALLOCATION PRIORITIES.

10. BECOME FAMILIAR WITH ALL EXISTING CONDITIONS PRIOR TO ENTERING INTO

CONTRACT. NO ADDITIONAL COST WILL BE ALLOWED FOR FAILURE TO DO SO.

11. ALL MECHANICAL SYSTEMS SHALL BE INSTALLED IN ACCORDANCE WITH THE

CODES LISTED ON THIS SHEET AND THE ARCHITECTURAL CODE PLAN.

12. THE ADOPTED ENERGY CODE FOR THIS PROJECT REQUIRES COMMISSIONING OF

THE MECHANICAL SYSTEMS. THE MECHANICAL CONTRACTOR SHALL INCLUDE

EXPENSES IN THEIR BID ASSOCIATED WITH THE CODE REQUIRED COMMISSIONING

PROCESS. THESE INCLUDE BUT ARE NOT LIMITED TO ATTENDING COMMISSIONING

MEETINGS, COMPLETING PREFUNCTIONAL CHECKLISTS, DEMONSTRATING SYSTEM

PERFORMANCE, AND ADDRESSING COMMISSIONING AUTHORITY REVIEW

COMMENTS.

[THIS NOTE HAS LIMITED APPLICABILITY AND SHOULD BE INCLUDED ONLY ON

PROJECTS THAT MEET THE FOLLOWING CRITERIA:

1. FOLLOWS THE IECC (OR VARIATION OF, SUCH AS THE FECC).

2. THE TOTAL MECHANICAL COOLING SYSTEM CAPACITY IS GREATER THAN 480,000

BTU/H.

3. THE TOTAL MECHANICAL HEATING SYSTEM CAPACITY IS GREATER THAN 600,000

BTU/H (INCLUDING SERVICE WATER HEATING).

4. THE HVAC SYSTEM DOES NOT SERVE INDIVIDUAL DWELLING UNITS OR SLEEPING

UNITS.

IF YOU ARE STILL UNSURE IF THIS NOTE APPLIES TO YOUR PROJECT, REFER TO

SECTION C408 OF THE IECC OR FECC.]

13. CONTRACTOR SHALL PROVIDE SUBMITTALS ON ITEMS LISTED IN THE MECHANICAL

SCHEDULES AND AS REQUIRED IN EACH SECTION OF SPECIFICATION TO THE

ENGINEER/OWNER FOR REVIEW PRIOR TO THE ORDER, PURCHASE OR

INSTALLATION OF THESE SAME ITEMS.

14. ALL EXISTING EQUIPMENT TO BE REMOVED SHALL HAVE ALL RELATED

HOUSEKEEPING PADS, PIPING, CONTROLS, GAUGES, ELECTRICAL SERVICE,

HANGERS, SUPPORTS AND ANY MISCELLANEOUS RELATED SERVICE OR PARTS

REMOVED COMPLETELY.

15. PROVIDE MANUAL AIR VENTS ON CLOSED SYSTEM WATER PIPING AT ALL CHANGES

IN ELEVATION DOWNWARD IN DIRECTION OF WATER FLOW.

16. CONTRACTOR SHALL CONSTRUCT AND INSTALL DUCTWORK ACCORDING TO

SMACNA STANDARDS AS A MINIMUM REQUIREMENT. REFER TO SPECIFICATIONS

FOR ADDITIONAL INFORMATION.

17. ALL DUCT DIMENSIONS ARE OUTSIDE DIMENSIONS. WHERE DUCT LINER IS USED,

THE THICKNESS OF THE LINER TO MAINTAIN THE CLEAR INSIDE DIMENSION HAS

BEEN INCLUDED. REFER TO DUCT INSULATION / LINER SCHEDULE AND/OR DIVISION

23 OF THE SPECIFICATIONS.

18. SPIN-IN FITTINGS TO VAV BOXES AND DIFFUSERS SHALL BE CONICAL TYPE (EXCEPT

LOCATIONS WHERE LISTED DUCT HEIGHT DOES NOT ACCOMMODATE). SPIN-IN

FITTINGS TO DIFFUSERS SHALL INCLUDE AN INTEGRAL MANUAL VOLUME DAMPER.

19. RIGID INLET DUCTS TO VAV BOXES [AND OUTLET DUCTS FOR EXHAUST TERMINALS]

SHALL BE THE SAME SIZE AS THE VAV BOX INLET CONNECTION UNLESS NOTED

OTHERWISE FOR A MINIMUM OF THREE DIAMETERS OF STRAIGHT DUCT.

20. ALL OPENINGS FROM EXHAUST DUCTS, EXHAUST FANS, GRAVITY ROOF VENTS,

INTAKE LOUVERS AND GOOSENECKS SHALL BE A MINIMUM OF 12" ABOVE THE TOP

OF THE FINISHED ROOFING SURFACE.

21. MOUNT THERMOSTAT AT 42" ON CENTER ABOVE FINISHED FLOOR UNLESS

OTHERWISE NOTED (ADA REQUIREMENT). ALIGN WITH OTHER ADJACENT DEVICES

ON WALL.

22. PROVIDE REDLINE MARK-UPS FOR ANY FIELD CHANGES OR MODIFICATIONS ON THE

CONSTRUCTION DOCUMENTS. REDLINE DRAWINGS SHALL BE PROVIDED WHETHER

COORDINATION DRAWINGS ARE REQUIRED OR NOT.

23. EQUIPMENT E.E.R. AND/OR C.O.P. VALUES SHALL COMPLY WITH THE CURRENT

EDITION OF ASHRAE 90.1.

24. EXISTING EQUIPMENT AS NOTED ON THE DRAWINGS SHALL BE RETURNED TO THE

OWNER AT THEIR DESIGNATED LOCATION.

25. PRIOR TO BALANCING MECHANICAL CONTRACTOR SHALL PROVIDE A CLEAN SET OF

FILTERS FOR AIR HANDLING UNITS. THIS CONTRACTOR SHALL PROVIDE A MEANS TO

SIMULATE 50% LOADED FILTERS. SYSTEM SHALL BE BALANCED IN THIS MODE.

CONTACT LIST

DENVER AND COLORADO SPRINGS OFFICES

14143 DENVER WEST PKWY, SUITE 550

GOLDEN, CO 80401

303.422.7400

TAMPA BAY AND MELBOURNE OFFICES

6555 N. WICKHAM ROAD, SUITE 104

MELBOURNE, FL 32940

321.241.4142

PROJECT ENGINEER / DESIGNER

NAME

123.456.7890

@BCER.COM

PROJECT MANAGER

MIKE CORDERO

727.800.7315

MCORDERO@BCER.COM

BCER PROJECT 145425001

PROGRESS - NOT FOR

CONSTRUCTION

ARCH/ENGR OF RECORD

EOR

BCER Engineering

DESIGNED BY

MIKE

SCHRODER

DRAWN BY

MICHAEL

ACCALIOS

ISSUE DATE

11/12/2025

AE PROJECT NUMBER

145425001

SHEET TITLE

MECHANICAL GENERAL

INFORMATION

DRAWING NO.

M001

PLAN CODE

MFR.

MODEL

INSTALLED

MFR.

MODEL

CAP. TONS

OUTPUT

MINIMUM

REQUIRED

TONS

EWT

(F°)

LWT

(F°)

GPM

MIN

GPM

P.D. (FT.

W.C.)

AIR COOLED CHILLER SCHEDULE

CHILLED WATER DATA

NO GLYCOL

PASSES

%

AMB.

TEMP.

(F°)

NO

COMPR.

STEPS LOW AMB.

CAP. CONTROL

CONTROL (°F)

SYSTEM

KW FLA

REFRIG.

TYPE

REFRIG.

CHARGE

(LBS)

CONDENSER DATA

FANS

QTY./HP.

CFM

ENTERING AIR

TEMP.

EER

KW

INPUT

MCA

MOCP

ELEC.

VOLT/PH

NOTES

ACCH-1

CARRIER 30RC-060 GS CARRIER

30RAP

60

54

44

141.1 70.90

4.12

BPHE

0

95

2

44

-20

71.96

R-32

58

4/6.4 (TOTAL)

42648

95

10.39

68.39

129.9

150

460-3-60

(2)(3)(4)(5)(6)(7)

AIR COOLED CHILLER SCHEDULE PROJECT SPECIFIC NOTES

1. HEAT TAPE, INSULATION AND CONTROL / POWER WITH UNIT ON HEAT EXCHANGER; POWER SHALL BE PROVIDED SEPARATELY FROM CHILLER POWER SOURSE.

2. PROVIDE UNIT WITH ENERGY USAGE COMPLIANCE TO CURRENT ADOPTED ASHRAE 90.1 REQUIREMENTS.

3. GPM INCLUDES OPERATION WITH P.G.

4. MINUMUM GPM REQUIRED BY THE MANUFACTURER.

5. INTEGRAL OR STANDALONE DISCONNECT AIC/SCCR SHALL MATCH THE AIC RATING OF THE PANELBOARD FEEDING THE EQUIPMENT, UNLESS OTHERWISE SPECIFIED IN THE ELECTRICAL DRAWINGS. IF INFORMATION IS NOT AVAILABLE, THE INTEGRAL OR STANDALONE DISCONNECT AIC/SCCR SHALL BE 65KAIC. THE VENDOR/CONTRACTOR SHALL REVIEW THE ELECTRICAL DRAWINGS DURING BID TIME.

6. CHILLER RAISED ON NEOPRENE COVERED STEEL PLATE TO PREVENT CORROSION.

7. FURNISHED WITH FACTORY-INTEGRATED 5 HP DUAL HYDRONIC PUMP.

BCER PROJECT 145425001

PROGRESS - NOT FOR

CONSTRUCTION

CAPACITY CONVENTIONS

• STATIC PRESSURES AND AIR PRESSURE DROPS ARE AT ALTITUDE OF PROJECT.

• HEATING AND COOLING OUTPUT CAPACITIES ARE AT ALTITUDE OF PROJECT.

• HORSEPOWERS ARE CORRECTED FOR PROJECT ALTITUDE.

• NATURAL GAS INPUTS ARE AT SEA LEVEL.

ARCH/ENGR OF RECORD

EOR

BCER Engineering

DESIGNED BY

MIKE

SCHRODER

DRAWN BY

MICHAEL

ACCALIOS

ISSUE DATE

11/12/2025

AE PROJECT NUMBER

145425001

SHEET TITLE

MECHANICAL SCHEDULES

DRAWING NO.

M002

(E)3"CWS

(E)3"CWR

DEMO

M2 M3

DEMO CH-1

M1

HVAC EQUIP

COURT

11-0018

DEMO

M2 M3

(E) CONCRETE

HSKPG PAD

BOYS/GIRLS

11-003A

(E)3"CWR

PRIMARY/INTERM

CLASSROOM

11-003

FD

FD

MECHANICAL

11-0013

EWH

FD

ELECT.

11-0012

SYSTEMS

11-0014

WOMEN

11-008A

CUSTODIAL

11-0015

MEN

11-009A

N

1 LEVEL 1 MECHANICAL DEMOLITION PLAN

1/4" = 1'-0"

4'

2'

0

4'

CORRIDOR

11-0016

WORK NOTES

M1

REMOVE EXISTING CHILLER AND ASSOCIATED INTEGRATED HYDRONIC PUMPS.

M2

REMOVE PORTIONS OF EXISTING CHILLED WATER PIPING AS NECESSARY FOR

NEW CHILLER CONNECTIONS.

M3

REMOVE AND REPLACE ANY EXISTING PIPING ACCESSORIES AS NECESSARY TO

ACCOMMODATE NEW CHILLER INSTALLATION.

BCER PROJECT 145425001

PROGRESS - NOT FOR

CONSTRUCTION

ARCH/ENGR OF RECORD

EOR

BCER Engineering

DESIGNED BY

MIKE

SCHRODER

DRAWN BY

MICHAEL

ACCALIOS

ISSUE DATE

11/12/2025

AE PROJECT NUMBER

145425001

SHEET TITLE

LEVEL 1 MECHANICAL

DEMOLTION PLAN

DRAWING NO.

MD101

3"CWS

M4

TYP

(E)3"CWS

(E)3"CWR

ACCH-1

M5 M6

3"CWR

3" CWR

BOYS/GIRLS

11-003A

M7 M8

HVAC EQUIP

COURT

11-0018

3" CWR

(E)3"CWR

(E) CONCRETE

HSKPG. PAD

PRIMARY/INTERM

CLASSROOM

11-003

FD

FD

MECHANICAL

11-0013

EWH

FD

ELECT.

11-0012

SYSTEMS

11-0014

WOMEN

11-008A

CUSTODIAL

11-0015

MEN

11-009A

N

1 LEVEL 1 MECHANICAL PLAN

1/4" = 1'-0"

4'

2'

0

4'

CORRIDOR

11-0016

WORK NOTES

M4

INSTALL NEW PIPING/VALVES OF THE SAME TYPE AND SIZE AS THE EXISTING

THAT WERE DEMOLISHED AND CONNECT TO NEW CHILLER.

M5

PROVIDE NEW AIR COOLED SCROLL CHILLER, ACCH-1, ON EXISTING CONCRETE

PAD. CONNECT EXISTING CHILLED WATER SUPPLY PIPING AND EXISTING

CHILLED WATER RETURN PIPING TO NEW CHILLER.

M6

NEW CHILLER IS FURNISHED WITH FACTORY-INTEGRATED DUAL HYDRONIC

PUMPS AND EXPANSION TANK.

M7

NEW CHILLER TO BE RAISED ON STEEL PLATE TOP AND BOTTOM NEOPRENE

COVERED TO PREVENT CORROSION. PROVIDE 2-3 INCH CLEARANCE ABOVE

CONCRETE SLAB.

M8

EXISTING BUILDING AUTOMATION SYSTEM CONTROL PANEL TO REMAIN.

CONTRACTOR SHALL PROVIDE ALL CONTROLS NECESSARY TO INTEGRATE NEW

CHILLER AND PUMPS INTO THE EXISTING BUILDING AUTOMATION SYSTEM

CONTROLS.

BCER PROJECT 145425001

PROGRESS - NOT FOR

CONSTRUCTION

ARCH/ENGR OF RECORD

EOR

BCER Engineering

DESIGNED BY

MIKE

SCHRODER

DRAWN BY

MICHAEL

ACCALIOS

ISSUE DATE

11/12/2025

AE PROJECT NUMBER

145425001

SHEET TITLE

LEVEL 1 MECHANICAL

PLAN

DRAWING NO.

M101

Commodity Codes

• NAICS 238220Plumbing, Heating, and Air-Conditioning Contractors

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.