Project Information

Bid Title

Annual Contract for the Purchase of Flygt Pumps

Issuing Agency

Mobile Water Service System(MAWSS)

Location

Alabama

Published Date

Apr 8, 2026

Closing Date

Apr 22, 2026

Government Level

State & Local

Status

Closed

Ref. #

IFB 26-025

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Annual Contract for the Purchase of Flygt Pumps

• Contract or Solicitation Number IFB 26-025

• Solicitation Description

  Contract Period: 6/1/26 through 12/31/26 with two possible 1-year ext. opt.

• Opening Date April 22nd 2026

• Contact Terry Herman at (251) 378-3509 or therman@mawss.com

• Solicitation Document(s)

  ifb-26-025-flygt-pumps-annual.pdf

Attachment Preview

Joyce Sawyer, Buyer II

(251) 694-3110 Office

jasawyer@mawss.com

Mobile Area Water and

Sewer System

4725 Moffett Road

Mobile, AL 36618-2236

PO Box 180249

Mobile, AL 36618-0249

INVITATION FOR BID

APRIL 8, 2026

INVITATION FOR BID NUMBER

IFB 26-025

NAME OF BID

BIDS WILL BE RECEIVED AT

BID OPENING DATE

Annual Contract for the Purchase of Flygt Pumps

MAWSS Bid Box

Donaghey Business Entrance

4725 Moffett Road

Mobile, AL 36618

If sending bids by UPS/Fed Ex, deliver to the Warehouse:

1610 Shelton Beach Rd. Ext., Mobile, AL 36618

April 22, 2026

BID CLOSING TIME

10:30 am Central Time

AWARD WILL BE MADE BY

Total Cost & Lead Time

CONTRACT PERIOD

MATERIAL DELIVERED TO

ADDITIONAL INFORMATION CONTACT

6/1/26 through 12/31/26 with two possible 1-year extension options

MAWSS – Lift Station Department

1610 Shelton Beach Road Ext.

Mobile, AL 36618

Terry Herman at (251) 378-3509 or therman@mawss.com

APPLICABLE SDP POLICY

NONE

Sealed bids must be in the Purchasing Department no later than the time specified in order to be considered. Submissions

received after the deadline will not be considered. Envelopes must bear the name of the supplier, company address and the

words “IFB 26-025 Flygt Pumps” or “IFB 26-025 NO QUOTE.” Facsimile or email bids will not be accepted.

All bids must be submitted on the attached forms, or your bid will be disqualified. Bidder shall furnish all the information

required by the solicitation. The bidder’s name must be typed or printed on the bid sheet and signed by the bidder or

appropriate authorized executive officer of the bidder’s company. Bidders must initial any changes or erasures. Bidders should

retain a copy of bids for their records.

Bidders shall acknowledge receipt of all addenda to this solicitation by signing and returning each addendum or by identifying

the addendum number and the date on the bid form. Failure to acknowledge receipt of any addendum by a bidder will result

in rejection of the bid if MAWSS determines that the addendum contains information that materially changes the requirements.

All bids shall be quoted FOB Destination, freight prepaid with no additional charges. Unless otherwise specified in the bid, all

prices will be on a firm-fixed price basis and are not subject to adjustments based on costs incurred. MAWSS reserves the right

to reject any or all bids submitted, to waive any informality in any bid or in the bid process, or to terminate the bid process at

any time, if deemed by MAWSS to be in MAWSS’s best interest.

A Purchase Order and this “Invitation for Bid” with “Specifications,” “Conditions,” “Bid Form,” signed by the successful bidder’s

authorized representative, and all attached drawings and other documents furnished by MAWSS to the bidders with the

Invitation for Bid in order to illustrate the contract requirements, will constitute a contract for the goods and/or services to be

purchased.

IFB 26-025 Annual Contract - Flygt Pumps

Page 1 of 9

IFB 26-025 FLYGT PUMPS

CONDITIONS

The Board of Water and Sewer Commissioners of the City of Mobile will accept bids for the Flygt Pumps in our Purchasing

Department Bid Box located at the East Visitor Entrance at 4725 Moffett Road, Mobile, AL. 36618 no later than 10:30 a.m. local

time on April 22, 2026. Bids will be opened immediately after bid closing time in the Operations Center Board room located at

the Customer Service entrance. Award will be by Total Cost & Lead Time. The bidder offers and agrees, if this bid is accepted,

to furnish the items as defined in the specifications for the unit price set opposite each item. Pricing shall be FOB Mobile,

Alabama. All items shall be delivered to our Lift Station Dept. located at 1610 Shelton Beach Rd. Ext., Mobile, AL 36618. The

bidder shall state the expected length of delivery time on the Bid Form.

Bidder understands and agrees that model and part numbers are provided for descriptive purposes only. Items of equal or

better quality will be considered but must be approved by MAWSS in writing. Upon delivery, if the quality, durability or

performance of any product represented as equal or better is determined by MAWSS to be unsatisfactory, MAWSS will require

a suitable substitute or will require that the originally specified item be delivered, at the unit price originally offered by bidder.

No substitution for items to be provided pursuant to this contract shall be permitted during the contract period without the

express written consent of MAWSS. All items provided shall be for commercial use and for the purposes reflected in the

contract documents.

Bidder understands that his/her bid shall be good and may not be withdrawn for a period of sixty (60) calendar days after the

scheduled closing time for receiving bids.

Bidder understands and agrees that quantities will be purchased by MAWSS on an “as needed” basis to replenish inventory.

MAWSS shall not be committed to the purchase of a pre-established minimum quantity for any one item.

A bidder may not modify its bid after bid opening. Errors in the extension of unit prices stated in a bid or in multiplication,

division, addition or subtraction in a bid may be corrected by the MAWSS Purchasing Buyer prior to award. In such cases, unit

prices shall not be changed.

It is the responsibility of the bidder to determine prior to the bid opening whether any amendment, additions, deletions or

changes of any type have been made to this Invitation for Bid, Conditions, Specifications, Bid Form or any other bid documents.

Bid documents and any amendments made to this bid will be posted on our website at www.mawss.com.

Invoices should be emailed to Accounts Payable at AcctsPayable@mawss.com.

END OF CONDITIONS

IFB 26-025 Annual Contract - Flygt Pumps

Page 2 of 9

IFB 26-025 FLYGT PUMPS

SCOPE/SPECIFICATIONS

ANNUAL CONTRACT FOR FLYGT PUMP REPLACEMENT

PURPOSE

Mobile Area Water and Sewer System (MAWSS) operates a wastewater collection system, two (2) wastewater

treatment plants, two (2) water treatment plants, and a water distribution system. These operations include the

utilization of various pumps, including wet pit and dry pit submersible pumps (submersible pumps). Through the

course of normal operations, these pumps experience failures and must be removed from service for evaluation and

repair or replacement. This bid document intends to establish an annual contract for the replacement of Flygt pumps

that are currently being used in the MAWSS system. All pumps shall be an exact or equal/greater than

replacement for each lift station identified in the bid tab. All pumps shall be bare pumps with no guiderail

assembly or relays included in the bid. The bare pump shall match the original guiderail assembly provided to

MAWSS for installation. Before a PO is issued, MAWSS will provide a photo of the factory pump name plate

affixed to the pump, providing one is available at that time.

QUANTITIES

The exact quantity of pumps to be purchased cannot be quantified. Purchases will be conducted on an “as needed

basis”. The quantities listed in the bid cost proposal are estimated only to provide a basis for preparing and

evaluating the bid and should not be construed as representing actual quantities to be purchased. Purchase quantities

may be none, partial, or more than the items/quantities listed herein.

DELIVERY

The goal of this bid is to provide a streamlined and speedy process for the purchase of Flygt pumps, by having

preapproved pricing for a period of one (1) year.

CONTRACT TERM

The initial contract term shall be from 6/1/26 through 12/31/26 with two possible 1-year extension options.

RENEWAL

The contract shall have an option to renew for two 1-year extensions at the same price, if agreed to in writing by

both parties and approved by the Board.

IFB 26-025 Annual Contract - Flygt Pumps

Page 3 of 9

FLYGT SUBMERSIBLE PUMP SPECIFICATION SHEET

Service:

Sewage

Type of Pump: End Suction Centrifugal - Submersible Pump

PART 1 GENERAL

1.01

Capability:

A. 3” minimum diameter spherical solid passage.

1.02

Materials of Construction:

A. Casing - cast iron A48 Class 35C or 40

B. All Exposed Bolts & Nuts - 316 stainless steel

C. Pump Exterior Coating - Factory applied primer and finish coat to suit pumped media.

D. Pump Interior – All internal wetted parts including volute assembly, shall receive a ceramic-

epoxy coating as per below. Unless parts are hardened material, or coating can affect the

hydraulics of the pump.

1. Belzona®1321 (Ceramic S -Metal) (Minimum 24 dry mils thickness) shall be

applied blue topcoat and gray basecoat (to ensure successful overlap) by brush,

applicator, or spray at a typical thickness of 15 mils per coat. The first coat shall not

be left more than 24 hours before overcoating with the second coat. Evidence of

basecoat shall not be identifiable upon completion.

E. Shaft & Sleeve - Stainless steel AISI 431 or 420

F. Impeller - Hard Iron (ASTM A-532 (Alloy 111A) 25% chrome cast iron. And shall have

hard iron wear ring or wear plate with equal hardness to the impeller. Unless unavailable for

a specific pump. The impeller shall not be a Vortex style unless replacing a pump with a

Vortex style impeller.

G. O-Rings - Viton

H. Upper Bearing - Single row deep groove ball bearing.

I. Lower Bearing - Two row angular contact ball bearing.

J. All mating surfaces where watertight sealing is required shall be machined and fitted with

Viton rubber O-rings. Fitting shall be such that sealing is accomplished by metal-to-metal

contact between machine surfaces. This will result in controlled compression of nitrile

rubber O-ring without requirement of a specific torque limit.

1.03

Drive Motor:

A. 240/480 VAC, 60HZ 3 Phase/Single Phase.

B. Design – Squirrel-Cage, Induction.

C. NEMA Design – Type B

IFB 26-025 Annual Contract - Flygt Pumps

Page 4 of 9

D. Windings – Copper, Class H Insulated rated for 180 degrees C

E. Service Factor – 1.15 continuous.

F. Design Temperature – 40°C ambient.

G. Non-overloading at any point on pump curve

H. Explosion Proof

I. Motor Terminal Board

J. Stator shall be heat-shrink fitted.

K. Motor Winding Over Temperature Thermostats

L. Seal Failure Moisture Probe

M. Motor cables shall be designed for submersible duty and shall be indicated by code or legend

permanently applied to cable.

N. The control and electrical cables shall be minimum 50 feet long or as required per specific

location.

1.04

Warranty:

A. The warranty shall be 100% (parts and labor) for the first year, 50% from the beginning of

the second year to the end of the fifth year. The units shall be warranted by the manufacturer

for a five-year period. Wear items such as seals, bearings impellers, rotors and stators may

be prorated during the five-year period.

1.05

Submittals:

A. Manufacturer’s literature, specifications, and engineering data including dimensions,

material, size and weight. Performance data and curves showing pump efficiencies, flow

rate, head, brake HP, motor HP, speed, and shut-off head.

B. Operation and maintenance manuals including complete installation, operation and

maintenance data including installation and wiring diagrams.

C. A complete parts list and exploded view diagram of the pump.

1.06

Manufacturer(s):

A. Acceptable manufactures include:

1. Flygt

B. Manufacturers shall provide a certified pump curve for each pump provided in accordance

with the Board’s Standard Specifications.

IFB 26-025 Annual Contract - Flygt Pumps

END OF SCOPE/SPECIFICATIONS

Page 5 of 9

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.