REDBAG BOX TYPE 6 ENGINE STORAGE UNIT

Project Information

Bid Title: REDBAG BOX TYPE 6 ENGINE STORAGE UNIT
Issuing Agency: State Government of Kentucky
Location: Kentucky
Published Date: May 26, 2026
Closing Date: Jun 10, 2026
Government Level: State & Local
Status: Closed
Ref. #: RFB-758-2600000599-1
Original Source: Join to Access Full Details
Bid Inquiries: Join to Access Full Details
Bid Documents: Join to Access Full Details
Project Description: Description: REDBAG BOX TYPE 6 ENGINE STORAGE UNIT

Department: Office Of The Controller

Buyer: Tierra Johnson

Solicitation Number: RFB-758-2600000599-1

Type: Request for Bids (RFB)

Category: -

Closing Date and Time: 06/10/2026 01:30 PM EDT

Buyer Information

Buyer Name

Tierra Johnson

Buyer Email

tierrab.johnson@ky.gov

Buyer Phone

502-782-3376

Important Dates

Issue Date

05/26/2026

Closing Date

06/10/2026 01:30 PM EDT

Bid Opening Date

-

Last Amended

-

Department Information

Category

-

Type

Request for Bids

Document Department

758

Status

Open

Description

REDBAG BOX TYPE 6 ENGINE STORAGE UNIT

Group 1

Default Commodity Group

Number of Lines: 1

Line Number Commodity Description Details Requested

1

The Red Bag Body Box will be constructed to complete the Type 6 Wildfire Engine build on the 2025 Ford F-550 Crew Cab XL 4 X 4 Flatbed. This unit will be built to fit around our existing 300 Gallon Pumper Unit 76 Long X 48 Wide X 66 Highz(MA-758-250000056) and to accommodate the Division of Forestry required equipment. General Construction Must be built to these exact specifications. All the topside mounted compartments shall be constructed at a minimum in the following manner: Compartments shall be constructed out of .125 smooth mill finish aluminum, stitch welded via mig or tig welding processes. The remaining area to be caulked to prevent any leaks. The doors shall close on a bulb type C style clamp on weather stripping (simple glue on weather strip is not acceptable) Compartments shall be mounted to the body using only stainless steel hardware to the outside of the compartments sandwiching the aluminum wall between them for a clean finish appearance on both the inside and outside. Each compartment shall have a sweep-out aluminum floor fully welded across the jam. Each compartment shall have a 6 x 10 stainless steel louvered vent in the center rear mounted high. A second matching louver shall be bolted to the outside using only stainless steel hardware. Doors constructed out of .125 high bright aluminum diamond plate. Driver and Passenger-side top hinged, lift-up doors with gas shocks to hold open at 90 degrees. Gas shocks to be mounted to adjustable brackets. The doors shall be stiffened via a minimum box pan rigidly attached to the inner side. The doors shall hinge on full length, stainless steel piano hinge with minimum 1/8 dia. pins installed with only stainless steel fasteners. Door latches shall be stainless steel twist handle style. They shall be installed with gaskets. NOTE: Overall width of boxes to be 95 on a 96 bed allows minimum recess from the rub rail on each side to protect compartment doors from trees.

Specifications

Commodity Code

44579

Quantity

1.00000

Unit of Measure

EA

Delivery Date

-

View Purchase History

Additional Information
Commodity Codes: NAICS 493110General Warehousing and Storage

Empower Your Bidding Strategy

Unlock Government BidHub's unparalleled access to high-quality, tailored bid information.

Access an extensive database of bids, including comprehensive local and state opportunities.
Receive customized alerts for the bids that matter most to your business.
Explore detailed specifications to ensure precise and competitive submissions.
Gain a competitive edge with up-to-date information and exclusive opportunities.

Start Free Trial

Line Number	Commodity Description	Details	Requested
1	The Red Bag Body Box will be constructed to complete the Type 6 Wildfire Engine build on the 2025 Ford F-550 Crew Cab XL 4 X 4 Flatbed. This unit will be built to fit around our existing 300 Gallon Pumper Unit 76 Long X 48 Wide X 66 Highz(MA-758-250000056) and to accommodate the Division of Forestry required equipment. General Construction Must be built to these exact specifications. All the topside mounted compartments shall be constructed at a minimum in the following manner: Compartments shall be constructed out of .125 smooth mill finish aluminum, stitch welded via mig or tig welding processes. The remaining area to be caulked to prevent any leaks. The doors shall close on a bulb type C style clamp on weather stripping (simple glue on weather strip is not acceptable) Compartments shall be mounted to the body using only stainless steel hardware to the outside of the compartments sandwiching the aluminum wall between them for a clean finish appearance on both the inside and outside. Each compartment shall have a sweep-out aluminum floor fully welded across the jam. Each compartment shall have a 6 x 10 stainless steel louvered vent in the center rear mounted high. A second matching louver shall be bolted to the outside using only stainless steel hardware. Doors constructed out of .125 high bright aluminum diamond plate. Driver and Passenger-side top hinged, lift-up doors with gas shocks to hold open at 90 degrees. Gas shocks to be mounted to adjustable brackets. The doors shall be stiffened via a minimum box pan rigidly attached to the inner side. The doors shall hinge on full length, stainless steel piano hinge with minimum 1/8 dia. pins installed with only stainless steel fasteners. Door latches shall be stainless steel twist handle style. They shall be installed with gaskets. NOTE: Overall width of boxes to be 95 on a 96 bed allows minimum recess from the rub rail on each side to protect compartment doors from trees.	Specifications Commodity Code 44579	Quantity 1.00000 Unit of Measure EA Delivery Date -	View Purchase History Additional Information

REDBAG BOX TYPE 6 ENGINE STORAGE UNIT

Project Information

Empower Your Bidding Strategy

Privacy Preferences