Project Information

Bid Title

5672 - Insulators, Pins, Braces and Guy Assemblies

Issuing Agency

City of Redding

Location

California

Published Date

Feb 10, 2026

Closing Date

Feb 19, 2026

Government Level

State & Local

Status

Closed

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Open Date	Description	Close Date
January 26, 2026	5672 - Insulators, Pins, Braces and Guy Assemblies OPEN	February 19, 2026

Attachment Preview

January 26, 2026

NOTICE INVITING BIDS

TO FURNISH

INSULATORS, PINS, BRACES AND GUY ASSEMBLIES

FOR THE

CITY OF REDDING, CALIFORNIA

(Bid Schedule 5672)

In accordance with the provisions of the Municipal Code of the City of Redding, sealed

bids will be received by the City Clerk’s Office at City Hall, 3rd Floor, 777 Cypress Avenue,

Redding, California 96001-2718, until 3:00 P.M, Thursday, February 19, 2026, for furnishing

insulators, pins, braces and guy assemblies for the City of Redding, per the bid specifications and

general conditions.

BIDS RECEIVED AFTER THIS TIME AND DATE WILL NOT BE ACCEPTED OR

CONSIDERED.

The said bids will be opened at 3:00 P.M, on Thursday, February 19, 2026, in the

designated City Hall Conference Room as posted in the main lobby of City Hall, 777 Cypress

Avenue, Redding, California.

All bids must be submitted on standard bid forms provided by the City of Redding. The

bidder shall provide the original (unbound) and one (1) copy of the bid proposal. Fax or

electronic submission of bid proposals will not be allowed. The City will award any resulting

contract in a manner consistent with the City purchasing ordinance.

The cut-off date and time for receiving questions regarding this bid is 5:00 P.M, on

Thursday, February 5, 2026. All inquiries must be made in writing and may be submitted to the

email address shown below.

THE CITY OF REDDING

Purchasing Division

Jennifer Antunes

Jennifer Antunes, Buyer

jantunes@cityofredding.gov

NOTE

If a potential bidder received this solicitation document through some means other

than from the City of Redding (including from the City of Redding Internet web site), it is

the responsibility of the potential bidder to advise the assigned City of Redding

Purchasing contact of its intention to submit a bid so that any addenda or other

correspondence related to this solicitation will be sent to the potential bidder. When

contacting the Purchasing Division, the bidder shall provide the solicitation number

located on the cover page of this document. Transmittal of this information must be in

writing, by U.S. Mail or e-mail. Transmittal of this information via telephone is not

acceptable.

Please submit bid on enclosed form only. Forward to:

City of Redding

City Clerk

777 Cypress Avenue

Redding, CA 96001-2718

Mailing envelope is to be clearly marked on the outside with the following notation:

“Bid on Schedule No. 5672; opening at

3:00 P.M. on Thursday, February 19, 2026.”

Bids will not be considered unless:

1. Your original Bid submittal and the stated number of copies are received.

2. Original Bid proposal form is signed in ink.

3. Signature is legible – No initials.

The City of Redding

SPECIFICATIONS AND GENERAL REQUIREMENTS

TO

FURNISH

INSULATORS, PINS, BRACES AND GUY ASSEMBLIES

Bid Schedule 5672

Prepared by:

REDDING ELECTRIC UTILITY

January 26, 2026

ABBREVIATIONS

Whenever in these specifications the following abbreviations are used, the intent and meaning shall be

interpreted as follows:

AA

AAMA

AASHTO

ACI

AFBMA

AGA

AGMA

AISC

AISI

AITC

AMCA

ANSI

APA

API

AREA

ASAE

ASCE

ASHRAE

ASME

ASTM

AWI

AWS

AWPA

AWPB

AWWA

Aluminum Association

Architectural Aluminum Manufacturers Association

American Association of State Highway and Transportation Officials

American Concrete Institute

Anti-Friction Bearing Manufacturers Association

American Gas Association

American Gear Manufacturers Association

American Institute of Steel Construction

American Iron and Steel Institute

American Institute of Timber Construction

Air Moving and Conditioning Association

American National Standards Institute

American Plywood Association

American Petroleum Institute

American Railway Engineering Association

American Society of Agricultural Engineers

American Society of Civil Engineers

American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.

American Society of Mechanical Engineers

American Society for Testing and Materials

Architectural Woodwork Institute

American Welding Society

American Wood Preservers Association

American Wood Preservers Bureau

American Water Works Association

BHMA

Builders Hardware Manufacturers Association

CBMA

CDA

CISPI

CMAA

CRSI

Certified Ballast Manufacturers Association

Copper Development Association

Cast Iron Soil Pipe Institute

Crane Manufacturers Association of America

Concrete Reinforcing Steel Institute

Fed.Spec. Federal Specifications

HI

Hydraulic Institute

HMI

Hoist Manufacturers Institute

S\356.18.hb

1

ABBREVIATIONS

ICBO

IEEE

ICEA

IC

International Conference of Building Officials

Institute of Electrical and Electronics Engineers, Inc.

Insulated Cable Engineers Association

Joint Industry Conferences of Hydraulic Manufacturers

MMA

Monorail Manufacturers Association

NBHA

NEC

NEMA

NESC

NFPA

National Builders Hardware Association

National Electrical Code

National Electrical Manufacturers Association

National Electric Safety Code

National Fire Protection Association

NLMA

NWMA

National Lumber Manufacturers Association

National Woodwork Manufacturers Association

OECI

OSHA

Overhead Electrical Crane Institute

Occupational Safety and Health Act (both Federal and State)

PS

Product Standards Section - U.S. Department of Commerce

RLM

RMA

RLM Standards Institute, Inc.

Rubber Manufacturers Association

SAE

SDI

SSPC

Society of Automotive Engineers

Steel Door Institute

Steel Structures Painting Council

TEMA

TCA

Tubular Exchanger Manufacturers Association

Tile Council of America

UBC

UL

Uniform Building Code

Underwriters Laboratories, Inc.

WWPA

Western Wood Products Association

Unless a particular issue is designated, all references to the above specifications, standards, or methods

shall, in each instance, be understood to refer to the issue in effect (including all amendments) on the first

published date of the Invitation to Bid/Request for Quotations.

S\356.18.hb

2

Commodity Codes

• NAICS 332999All Other Miscellaneous Fabricated Metal Product Manufacturing
• NAICS 336413Other Aircraft Parts and Auxiliary Equipment Manufacturing

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.