Project Information

Bid Title

Transportation Maintenance Deltona - Replace Fuel Island and Tanks

Issuing Agency

Volusia County Schools

Location

Florida

Published Date

Jul 8, 2026

Closing Date

Jul 15, 2026

Government Level

State & Local

Status

Closed

Ref. #

Project No. 2648210

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Transportation Maintenance Deltona - Replace Fuel Island and Tanks - Project No. 2648210

Mandatory Prebid Meeting:	June 25, 2026 at  11:30 AM
Bid:	July 15, 2026 at  1:30 PM
Project Bid Documents:	Plans Project Manual Prebid Sign-in Addendum No. 1 issued 7/08/2026
Estimate:	$1,323,828.10
Consultant:	Kimley-Horn and Associates, Inc. Jeremy Demboski (813) 620-1460
Owner:	VCS Project Manager Jim Bott (386) 947-8786
Bid Status:	Active

Attachment Preview

VOLUSIA

COUNTY SCHOOLS

"LEADING WITH GRACE AND RESPECT"

THE SCHOOL BOARD OF VOLUSIA

COUNTY FLORIDA

200 North Clara Avenue

DeLand, Florida 32720

TRANSPORTATION / MAINTENANCE -

DELTONA

REPLACE FUEL ISLAND AND TANKS

VCS Project NO. 2648210

2101 EUSTACE AVE DELTONA, FL 32725

SCHOOL BOARD

MEMBERS

RUBEN COLON

KRISTA GOODRICH

DONNA BROSEMER

JAMIE HAYNES

JESSIE THOMPSON

DR. CARMEN J. BALGOBIN

BOARD CHAIR

VICE BOARD CHAIR

MEMBER

MEMBER

MEMBER

SUPERINTENDENT

201 N FRANKLIN ST

SUITE 1400

TAMPA, FL 33602

PHONE: 813.620.1460

REGISTRY NO. 35106

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

DESCRIPTION OF WORK

REPLACE AND RELOCATE EXISTING 6,000 GALLON UNLEADED AND 12,500 GALLON DIESEL UNDERGROUND STORAGE TANKS

WITH 12,000 GALLON UNLEADED AND 12,500 GALLON DIESEL ABOVEGROUND STORAGE TANKS FOR THE BASE BID, ALSO

REPLACE EXISTING 20,000 GALLON DIESEL ABOVEGROUND STORAGE TANK WITH NEW 20,000 GALLON DIESEL

ABOVEGROUND STORAGE TANK AS AN ADD ALTERNATE. ALL PIPING WILL BE REPLACED AND ROUTED ABOVEGROUND WITH

CARBON STEEL PIPE AND EXTERIOR COATINGS FOR THE BASE BID AND STAINLESS STEEL PIPE AS AN ADD ALTERNATE. THE

EXISTING CANOPY WILL BE REPLACED AND RELOCATED. THE FUELING MANAGEMENT SYSTEM WILL BE REPLACED AND

RELOCATED. THE 2 DISPENSERS (4 TOTAL HOSES) WILL BE REPLACED WITH 3 DISPENSERS (6 TOTAL HOSES).

Architect's Statement of Compliance

To the best of my knowledge, these drawings and the project manual are complete and comply with

the Florida Building Code.

LOCATION MAP

ENGINEERS & CONSULTANTS

PLUMBING / FUEL OIL

KIMLEY-HORN

201 N. FRANKLIN ST., SUITE 1400

TAMPA, FL 33602

(813) 556 - 6670

JEREMY DEMBOSKI

JEREMY.DEMBOSKI@KIMLEY-HORN.COM

WWW.KIMLEY-HORN.COM

ELECTRICAL

KIMLEY-HORN

201 N. FRANKLIN ST., SUITE 1400

TAMPA, FL 33602

(813) 467 - 7527

JIMMY NGUYEN

JIMMY.NGUYEN@KIMLEY-HORN.COM

WWW.KIMLEY-HORN.COM

STRUCTURAL

KIMLEY-HORN

11601 KEW GARDENS AVE, SUITE 200

PALM BEACH GARDENS, FL 33410

(561) 840 - 0281

SHEILA PREBLE

SHEILA.PREBLE@KIMLEY-HORN.COM

WWW.KIMLEY-HORN.COM

CIVIL

KIMLEY-HORN

6876 MARWICK LANE, SUITE 350

ORLANDO, FL 32827

(407) 409 - 7003

BLAKE WAGNER

BLAKE.WAGNER@KIMLEY-HORN.COM

WWW.KIMLEY-HORN.COM

NOT TO SCALE

PROJECT SHEET INDEX

SHEET NUMBER

SHEET NAME

.GENERAL

G000

COVER SHEET

.PLUMBING

P000

P001

P101

PD102

P201

P300

P301

P302

P303

FUEL OIL SYMBOLS, ABBREVIATIONS, SHEET SPECS AND NOTES

FUEL OIL EQUIPMENT LIST

FUEL OIL NEW PLAN

FUEL OIL DEMO PLAN

FUEL OIL ISOMETRIC PLANS

FUEL OIL DETAILS

FUEL OIL DETAILS

FUEL OIL SCHEMATIC DIAGRAMS

FUEL OIL SITE SCHEMATIC PLAN

CIVIL

C100

C200

C300

C310

C400

C500

C600

GENERAL NOTES

STORMWATER POLLUTION PREVENTION PLAN

OVERALL EXISTING CONDITIONS AND DEMOLITION PLAN

EXISTING CONDITIONS AND DEMOLITION PLAN

SITE PLAN

PAVING AND GRADING PLAN

GENERAL CONSTRUCTION DETAILS

ELECTRICAL

E000

E001

ED101

E101

E102

E201

E500

E600

E601

ELECTRICAL SYMBOLS, ABBREVIATIONS, AND NOTES

ELECTRICAL SPECIFICATIONS

ELECTRICAL DEMO POWER PLAN

OVERALL POWER PLAN

ENLARGED POWER PLAN FUEL CANOPY

ELECTRICAL LIGHTING PLAN

ELECTRICAL RISR DIAGRAM

ELECTRICAL DETAILS

HAZARD CLASSIFICATIONS

STRUCTURAL

S100

S200

S201

S202

STRUCTURAL GENERAL NOTES

CANOPY DETAILS

FUEL TANK SLAB DETAILS 1 OF 2

FUEL TANK SLAB DETAILS 2 OF 2

CONSTRUCTION DOCUMENTS - 03/23/2026

ARCH/ENGR OF RECORD

JEREMY DEMBOSKI

DESIGNED BY

JTD

DRAWN BY

SRM

ISSUE DATE

3/23/2026

AE PROJECT NUMBER

145642003

SHEET TITLE

COVER SHEET

DRAWING NO.

G000

PLUMBING SYMBOLS AND LEGEND

SYMBOL

ABBREVIATION DESCRIPTION

BV

CS

BFV

GV

CHV

GLV

ANV

TDV

HB

HV

BP

GPR

BALL VALVE

CIRCUIT SETTER OR FLOW CONTROL VALVE

BUTTERFLY VALVE

GATE VALVE

CHECK VALVE

GLOBE VALVE

ANGLE VALVE

TRIPLE DUTY VALVE

HOSE BIB

3/4" HOSE END DRAIN VALVE

BACKFLOW PREVENTOR

GAS PRESSURE REGULATOR

STR

STR

PTR

RV

WHA

PG

TH

FCO/GCO

WCO

PD

PU

PU

PD

COP

FLS

FD

VTR

STRAINER

STRAINER WITH 3/4" HOSE END DRAIN VALVE

PRESSURE - TEMPERATURE RELIEF VALVE

PRESSURE RELIEF VALVE

2-WAY CONTROL VALVE

3-WAY CONTROL VALVE

UNION

REDUCER

WATER HAMMER ARRESTOR

PRESSURE GAGE WITH GAUGE COCK

THERMOMETER

FLOOR OR GRADE CLEANOUT

WALL CLEANOUT

PIPING TEE DOWN

PIPING TEE UP

PIPING ELBOW UP

PIPING ELBOW DOWN

BRANCH - TOP CONNECTION

BRANCH - BOTTOM CONNECTION

CAP ON END OF PIPE

ARROW INDICATES DIRECTION OF EACH FLOW

FLOOR SINK

FLOOR DRAIN

PLUMBING VENT THRU ROOF

FLORIDA DEPARTMENT OF ENVIRONMENTAL

PROTECTION APPROVED STORAGE TANK SYSTEM

EQUIPMENT

EQ-352 MODERN WELDING, FIREGUARD DOUBLE-WALL ABOVEGOUND TANK

EQ-527 MORRISON 918 AST CLOCK GAUGE WITH AN ALARM SYSTEM

EQ-356 MORRISON 9095A OVERFILL PROTECTION VALVE

EQ-535 MORRISON 515 REMOTE FILL SPILL CONTAINMENT

EQ-628 VEEDER-ROOT MAG SENSOR HYDROSTATIC TEST AND SECONDARY

CONTAINMENT VACUUM SENSING SYSTEM

EQ-876 VEEDER-ROOT TLS4 CONSOLE

NOTE:

THE STORAGE TANK SYSTEM INSTALLATION PLAN MEETS THE

REQUIREMENTS OF CHAPTER 62-762 FLORIDA ADMINISTRATIVE CODE AND

ALL THE APPLICABLE REFERENCE GUIDELINES.

FUEL OIL SHEET LIST

SHEET #

P000

P001

P101

P201

P300

P301

P302

P303

PD102

SHEET NAME

FUEL OIL SYMBOLS, ABBREVIATIONS, SHEET SPECS AND NOTES

FUEL OIL EQUIPMENT LIST

FUEL OIL NEW PLAN

FUEL OIL ISOMETRIC PLANS

FUEL OIL DETAILS

FUEL OIL DETAILS

FUEL OIL SCHEMATIC DIAGRAMS

FUEL OIL SITE SCHEMATIC PLAN

FUEL OIL DEMO PLAN

PLUMBING PIPING LEGEND

SYMBOL

ST

ST

ODL

ODL

CD

TW

TP

G

MPG

HPG

LPG

CA

ABBREVIATION DESCRIPTION

CW

COLD WATER

HWS

HOT WATER SUPPLY

HWR

HOT WATER RETURN

W

SANITARY WASTE

W

SANITARY WASTE (ABOVE GRADE)

GLW

GREASE LADEN WASTE

V

VENT PIPING

ST

STORM OR ROOF DRAIN PIPING

ST

STORM OR ROOF DRAIN PIPING (ABOVE GRADE)

ODL

OVERFLOW ROOF DRAIN PIPING

ODL

OVERFLOW ROOF DRAIN PIPING (ABOVE GRADE)

CD

CONDENSATE DRAIN PIPING

TW

TEMPERED WATER (105* F)

TP

TRAP PRIMER WATER PIPING

G

GAS - LOW PRESSURE (7"-14" WC)

MPG

GAS - MEDIUM PRESSURE (2-3 PSI)

HPG

GAS - HIGH PRESSURE (5 PSI AND ABOVE)

LPG

GAS - LIQUIFIED PETROLEUM

CA

COMPRESSED AIR PIPING

PLUMBING ANNOTATIONS

SYMBOL ABBREVIATION DESCRIPTION

RTU

MECHANICAL EQUIPMENT - (SEE MECHANICAL SCHEDULE)

X

1

M6.1

DETAIL REFERENCE CALLOUT, DETAIL NUMBER AND SHEET

1

P0.00

L-1

?

SECTION VIEW CALLOUT, DETAIL NUMBER AND SHEET

POC

AP

POINT OF CONNECTION - NEW ITEMS TO EXISTING ITEMS

PLUMBING FIXTURE SCHEDULE - (SEE SCHEDULE)

SHEET KEYNOTES

ACCESS PANEL

APPLICABLE CODES

1.

2023 FLORIDA BUILDING CODE

•

2023 FLORIDA BUILDING CODE, PLUMBING

•

2023 FLORIDA BUILDING CODE, MECHANICAL

•

2023 FLORIDA BUILDING CODE, FUEL GAS

•

2023 FLORIDA BUILDING CODE, ENERGY CONSERVATION

2.

FLORIDA DEPARTMENT OF ENVIRONMENTAL QUALITY

•

62-762 F.A.C. ABOVEGROUND FUEL TANK INSTALLATIONS.

3.

NATIONAL FIRE PROTECTION ASSOCIATION:

•

30: FLAMMABLE AND COMBUSTIBLE LIQUID CODE

•

30A: AUTOMOTIVE SERVICE STATION CODE

•

70: NATIONAL ELECTRIC CODE

4.

AMERICAN PETROLEUIM INSTITUTE

•

1604: CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS

•

334: GUIDE TO LEAK DETECTION FOR ABOVEGROUND STORAGE TANKS

•

340: LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR

ABOVEGROUND STORAGE FACILITIES

5.

PETROLEUM EQUIPMENT INSTITUTE:

•

RP 200 INSTALLATION OF ABOVEGROUND STORAGE SYSTEMS

•

RP 500 INSPECTION & MAINTENANCE OF MOTOR FUEL DISPENSING EQUIPMENT

•

RP 600 OVERFILL PREVENTION FOR ASTS

6.

OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION:

•

CONSTRUCTION SAFETY AND HEALTH REGULATIONS SUBPART P, 1902.50 THRU

1926.653

7.

MANUFACTURER'S STANDARDIZATION SOCIETY

•

MSS SP-58: PIPE HANGERS AND SUPPORTS

FUEL DISPENSER REGULATIONS

AND LABELING

1.

DISPENSERS MUST BE INSTALLED IN ACCORDANCE WITH LOCAL AND STATE

REGULATIONS.

2.

THE FOLLOWING REGULATION IS APPLICABLE TO THE UNLEADED FUEL DISPENSING

SYSTEM AND MUST TAKE PRECEDENCE OVER ALL INDICATED DATA ON THIS

DRAWING:

A.

16 CFR PART 306 - AUTOMOTIVE FUEL RATINGS, CERTIFICATION, AND

POSTING.

3.

ALL LABELS MUST BE RESISTANT TO FUEL, GREASE, OIL, SOLVENTS, AND

DETERGENTS AND MUST BE ABLE TO WITHSTAND EXTREME WEATHER CONDITIONS

FOR AT LEAST ONE YEAR.

4.

ACCEPTABLE LABELS INCLUDE LABELS APPROVED BY THE CONTRACTING OFFICER

AND STANDARD TO THE INDUSTRY

PLUMBING ABBREVIATIONS

ABBREVIATION

@

ADA

AFF

AHJ

API

APPROX.

AST

ATG

AUX.

AV

AW

BHP

BOP

BTU/H

COMB.

CONN.

CS

CSDL.

DBL.

D.C.

DIA

DIM.

DSL

(E)

EFF

ELECT.

ELD

ELL

EMT

E.S.O.

F

F-24

F.G.

FLA

FLEX

FNPT

FO-D

FO-UL

FPM

FRP

FSP

GA

GAL.

GPM

HD

H.P.

I.D.

KW

LBS.

MBH

MAX.

MCA

MFRS

MGS

MIN.

MNPT

MOCP

MW

(N)

N/A

N/C

NEC

NFPA

NPT

N/O

NO.

N.T.S.

O.D.

OFCI

P

PD

PRV

PSI

PVC

Q

RD

REF.

REQD.

RPM

RSG.

SEC.

SPECS

SS

S.T.P.

T.L.M.

TYP.

U.B.C.

U.F.C.

U.G.

U.L.

U.M.C.

UNL

U.P.C.

U.S.T.

V

VPR

VAC.

VFD

V.R.

W/

W.C.

WVS

DESCRIPTION

AT

AMERICANS WITH DISABILITIES ACT

ABOVE FINISHED FLOOR

AUTHORITY HAVING JURISDICTION

AMERICAN PETROLEUM INSTITUTE

APPROXIMATELY

ABOVEGROUND STORAGE TANK

AUTOMATIC TANK GAUGE

AUXILIARY

ACID VENT

ACID WASTE

BRAKE HORSE POWER

BOTTOM OF PIPE

BRITISH THERMAL UNIT PER HOUR

COMBINATION

CONNECTION

CARBON STEEL

CONTINUOUS STATISTICAL LEAK DETECTION

DOUBLE

DIRECT CURRENT

DIAMETER

DIMENSION

DIESEL FUEL

EXISTING

EFFICIENCY

ELECTRICAL

ENHANCED LEAK DETECTION

ELBOW

ELECTRICAL METALLIC TUBING

EMERGENCY SHUT OFF

FILL

JET FUEL

FIBERGLASS

FULL LOAD AMPS

FLEXIBLE

FEMALE NATIONAL PIPE THREAD

FUEL OIL - DIESEL

FUEL OIL - UNLEADED

FEET PER MINUTE

FIBERGLASS REINFORCED PLASTIC

FUEL SAMPLE POINT

GAGE OR GAUGE

GALLON

GALLONS PER MINUTE

HEAD PRESSURE

HORSEPOWER

INSIDE DIAMETER

KILOWATT

POUNDS

ONE THOUSAND BTUH

MAXIMUM

MINIMUM CICUIT AMPS

MANUFACTURER'S

MOGAS FUEL

MINIMUM

MALE NATIONAL PIPE THREAD

MAXIMUM OVER CURRENT PROTECTION

MONITOR WELL

NEW

NOT APPLICAPLE

NORMALLY CLOSED

NATIONAL ELECTRIC CODE

NATIONAL FIRE PROTECTION ASSOCIATION

NATIONAL PIPE THREAD

NORMALLY OPEN

NUMBER

NOT TO SCALE

OUTSIDE DIAMETER

OWNER FURNISHED, CONTRACTOR INSTALLED

PRODUCT LINE

PRESSURE DROP

PRESSURE REDUCING VALVE

POUNDS PER SQUARE INCH

POLYVINYL CHLORIDE

QUANTITY

ROOF DRAIN

REFERENCE

REQUIRED

REVOLUTIONS PER MINUTE

RIGID STEEL GALVANIZED

SECTION

SPECIFICATIONS

STAINLESS STEEL

SUBMERGED TURBINE PUMP

TANK LEVEL MONITOR

TYPICAL

UNIFORM BUILDING CODE

UNIFORM FIRE CODE

UNDER GROUND

UNDERWRITER'S LABORATORY

UNIFORM MECHANICAL CODE

UNLEADED

UNIFORM PLUMBING CODE

UNDERGROUND STORAGE TANK

VAPOR LINE

VAPOR FUEL

VOLT AMP CURRENT

VARIABLE FREQUENCY DRIVE

VAPOR RECOVERY

WITH

WATER COLUMN

WASTE VENT STACK

FUEL OIL GENERAL NOTES

GENERAL:

A.

CONTRACTOR SHALL HAVE A MINIMUM OF 5 YEARS EXPERIENCE INSTALLING FLEET FUEL

SYSTEMS AND MUST HAVE THE FOLLOWING CERTIFICATIONS IN ORDER TO BID ON THIS PROJECT

OR BE INVOLVED ON ANY CONSTRUCTION.

a.

OPW FUEL MANAGEMENT CERTIFICATION

b.

GILBARCO / VEEDER-ROOT CERTIFICATION

B.

ALL PIPING WILL BE PRIMARY PIPING WITHIN SECONDARY PIPING. SIZES TO BE SPECIFIED ON

DRAWINGS. PIPING TO BE INSTALLED PER MANUFACTURERS INSTRUCTIONS.

C.

ALL ABOVEGROUND PIPING WILL BE LISTED IN ACCORDANCE WITH UL/ULC 1369.

D.

THE INFORMATION INDICATED ON THESE DRAWINGS AS EXISTING IS BASED UPON INFORMATION

TAKEN FROM AS-BUILT DRAWINGS, FIELD INVESTIGATION, AND INFORMATION OBTAINED FROM

EXISTING SUBMITTAL DATA, ETC. THE PLANS DO NOT GUARANTEE ACCURACY BUT ARE ONLY AN

INDICATION OF EXISTING CONDITIONS. IT IS THE CONTRACTOR'S RESPONSIBILITY TO FIELD

VERIFY EXACT CONDITIONS SUCH AS EQUIPMENT PLACEMENT, PIPING (SIZE, ROUTING, AND

ELEVATION), ETC. THE DRAWINGS ARE INTENDED TO PROVIDE THE CONTRACTOR AN INDICATION

OF THE SYSTEM INSTALLED IN THE FACILITY TO DATE. IT WILL BE THE CONTRACTOR'S

RESPONSIBILITY TO MAKE ADJUSTMENTS TO THE DRAWING INFORMATION AS REQUIRED TO

MATCH EXISTING FIELD CONDITIONS.THE GENERAL CONTRACTOR ACCEPTS FULL

RESPONSIBILITY FOR PROPER HANDLING AND INSTALLATION OF PIPING SYSTEM. THE GENERAL

CONTRACTOR SHALL ENSURE THAT GOOD WORKMANSHIP AND CONSTRUCTION PROCEDURES

ARE FOLLOWED THROUGHOUT THE INSTALLATION, REGARDLESS OF INCLUSION OR OMISSION OF

ANY APPLICABLE SUGGESTION IN THESE INSTRUCTIONS OR ON THE DRAWINGS.

RESPONSIBILITY:

A.

ELECTRICAL CONTRACTOR TO PROVIDE AND INSTALL ALL POWER WIRING, EQUIPMENT

DISCONNECTS, LOW VOLTAGE WIRING, ATG SENSOR, AND PROBE WIRING TO MAKE SYSTEM

OPERATIONAL

B.

FUEL OIL CONTRACTOR TO PROVIDE, CALIBRATE, AND INSTALL DISPENSERS, TANKS, PUMPS, AND

PIPING.

C.

FUEL OIL CONTRACTOR, ELECTRICAL CONTRACTOR, CONSTRUCTION MANAGER, AND NETWORK

SUPPLIER MUST BE ON SITE ON DAY OF SYSTEM STARTUP.

SETTLEMENT:

THE USE OF SPECIFIED MATERIALS AND SPECIFIED PROCEDURES WILL ENSURE THAT TANK

SETTLEMENT, TANK DISTORTION, MOVEMENT IN CONCRETE SLAB, OR INSTALLATION FAILURE DO

NOT OCCUR. SHOULD ANY INSTALLATION FAILURE BE MADE APPARENT, THE CONTRACTOR WILL

ASSUME RESPONSIBILITY FOR NOT FOLLOWING THE SPECIFIED PROCEDURES AND WILL INCUR

ANY ADDITIONAL COSTS ASSOCIATED WITH THE CORRECTIVE MEASURES, INCLUDING COMPLETE

REMOVAL AND RESETTING OF ALL ABOVEGROUND TANKAGE AT THE SITE. IF IT IS DETERMINED

THAT MOVEMENT, SETTLEMENT, OR DISTORTION HAS BEEN CAUSED BY FACTORS BEYOND THE

CONTRACTOR'S CONTROL, THE COST OF REMEDIAL MEASURES WILL BE BORNE BY OTHERS. THE

FUEL OIL INSTALLATION CONTRACTOR DOES HEREBY AGREE TO GUARANTEE THE

ABOVEGROUND TANKAGE INSTALLATION AGAINST FAILURE AS OUTLINED HERIN ABOVE, FOR A

PERIOD OF ONE (1) YEAR FROM DATE OF FINAL ACCEPTANCE.

TANK, DISPENSER, AND PIPES:

A.

THE DRAWINGS AND SPECIFICATIONS WILL DETERMINE THE EXACT LOCATION, NUMBER, SIZE,

AND TYPE OF EQUIPMENT TO BE INSTALLED AND INSTALLATION TO BE FOLLOWED.

B.

ALL WORK SHALL BE DONE IN ACCORDANCE WITH THE MANUFACTURER'S, FEDERAL, STATE, AND

ALL OTHER APPLICABLE CODES, RULES, AND LOCAL REQUIREMENTS.

C.

CONTRACTOR ASSUMES RESPONSIBILITY FOR ALL NECESSARY PERMITS, INSPECTIONS, AND

TESTS AND SHALL INCLUDE THE COST OF THESE REQUIREMENTS IN THEIR BID.

D.

CONTRACTOR TO INSTALL AND TEST ALL ALL TANKS, PIPING, DISPENSERS, AND MONITORING

EQUIPMENT PER MANUFACTURER'S INSTRUCTIONS, INCLUDING THE INSTALLATION OF STAGE I

VAPOR RECOVERY.

E.

CONTRACTOR SHALL INSTALL ALL ABOVEGROUND PIPING SHOWN ON THE DRAWINGS, WITH A

MINIMUM NUMBER OF BENDS/ELBOWS.

F.

NEW ABOVEGROUND FUEL PIPING MUST BE SINGLE WALL CARBON STEEL MATERIAL WITH

EXTERIOR COATINGS.

G.

ABOVEGROUND TANKS AND PIPES MUST USE COLOR CODING, BANDING, PRODUCT NAMES, AND

DIRECTION OF FLOW TO IDENTIFY PRODUCT SERVICE.

H.

PROVIDE LOW POINT DRAINS AT ALL LOW POINTS AND HIGHT POINT VENTS AT ALL HIGHT POINTS.

INSTALL FUEL PIPING WITH A MINIMUM SLOPE OF 0.2% DOWN FROM THE HIGH POINTS TO THE

LOW POINTS, UNLESS OTHERWISE INDICATED.

I.

PIPE SUPPORTS WELDED TO CARBON STEEL MUST BE EXTERIOR COATED CARBON STEEL. ALL

OTHER PIPE SUPPORTS AND OTHER MISCELLANEOUS METAL SHAPES MUST BE HOT DIPPED

GALVANIZED CARBON STEEL, UNLESS OTHERWISE INDICATED.

FINISH:

ALL PRODUCTS TO BE SHERWIN-WILLIAMS. BOLLARDS AND ISLAND FORMS (IF REQUIRED BY AHJ)

TO MATCH EXISTING.

CANOPY:

CANOPY IS A PREFAB STEEL STRUCTURE, REFER TO STRUCTURAL DRAWINGS FOR MORE

INFORMATION.

CONTRACTOR:

A.

CONTRACTOR IS RESPONSIBLE FOR REVIEWING ALL DRAWINGS AND SPECIFICATIONS

ASSOCIATED WITH THIS PROJECT SCOPE AND WILL NOTIFY THE PROJECT ENGINEER IN WRITING

PRIOR TO THE INITIATION OF CONSTRUCTION. IF A CONFLICT WITH THE DOCUMENTS RELATIVE

TO THE SPECIFICATIONS OR APPLICABLE CODES IS FOUND. FAILURE BY THE CONTRACTOR TO

NOTIFY THE PROJECT ENGINEER SHALL CONSTITUTE ACCEPTANCE OF FULL RESPONSIBILITY BY

THE CONTRACTOR TO COMPLETE THE SCOPE OF WORK AS DEFINED BY THE DRAWINGS AND IN

FULL CONFORMANCE WITH LOCAL REGULATIONS AND CODES.

B.

THE CONTRACTOR ACCEPTS FULL RESPONSIBILITY FOR PROPER HANDLING AND INSTALLATION

OF THE ASTS, DISPENSERS, AND ALL EQUIPMENT AND SHALL ENSURE THAT GOOD

WORKMANSHIP PRACTICES AND CONSTRUCTION PROCEDURES ARE FOLLOWED REGARDLESS

OF THE INCLUSION OR OMISSION OF ANY INSTRUCTION.

C.

UNKNOWN SITUATIONS OR CONDITIONS NOT COVERED IN THESE AND THE MANUFACTURER'S

INSTRUCTIONS ARE THE RESPONSIBILITY OF THE CONTRACTOR, REGARDLESS OF THE

PRESENCE OF THE MANUFACTURER, ENGINEER, OR OWNER AT THE INSTALLATION SITE.

D.

ABOVEGROUND TANKS MUST BE INSTALLED PER THESE SPECIFICATIONS, DRAWINGS,

MANUFACTURER'S INSTRUCTIONS, AND NFPA 30 AND 30A. ANY LOCAL CODES THAT APPLY MUST

BE FOLLOWED. FAILURE TO FOLLOW THESE INSTALLATION INSTRUCTIONS WILL VOID THE

WARRANTY AND WILL RESULT IN TANK FAILURE. PROPER INSTALLATION OF ASTS HELP PREVENT

TANK DAMAGE AND SHOULD ENSURE LONG-TERM CORROSION-PROOF SERVICE.

E.

THE INSTALLATION PROCEDURE SHALL COMPLY WITH BOTH THESE SPECIFICATIONS AND THE

RESPECTIVE TANK MANUFACTURER'S SPECIFICATIONS. IF THE CONTRACTOR FINDS A CONFLICT

IN BETWEEN THESE TWO SPECIFICATIONS, IT IS THEIR RESPONSIBILITY TO CONTACT THE

ENGINEER OF RECORD FOR CLARIFICATION AND GUIDANCE.

F.

AN INTERSTITIAL INTEGRITY TEST SHALL BE PERFORMED ON EACH DOUBLE-WALLED STORAGE

TANK WITH A CLOSED INTERSTICE AFTER IT IS DELIVERED AND PLACED AT ITS FINAL LOCATION

AT THE FACILITY, AND BEFORE THE STORAGE TANK IS PLACED INTO SERVICE. TEST SHALL BE

PERFORMED IN ACCORDANCE WITH THE MANUFACTURERS TESTING SPECIFICATIONS. TEST

RESULTS SHALL BE PROVIDED TO EOR, CLIENT, AND ENVIRONMENTAL.

G.

ALL OVERFILL PROTECTION DEVICES SHALL BE TESTED FOR OPERABILITY AT INSTALLATION AND

TEST RESULTS SHALL BE MAINTAINED AND AVAILABLE FOR INSPECTION BY THE DEPARTMENT OR

COUNTY IN ACCORDANCE WITH RULE 62-762.711, F.A.C.

H.

PRESSURIZED SMALL DIAMETER INTEGRAL PIPING SYSTEMS CONNECTED TO DISPENSERS SHALL

BE INSTALLED WITH SHEAR VALVES OR EMERGENCY SHUTOFF VALVES IN ACCORDANCE WITH

SECTION 6.3 OF NFPA 30A, CODE FOR MOTOR FUEL DISPENSING FACILITIES AND REPAIR

GARAGES, REQUIREMENTS FOR DISPENSING DEVICES, 2021 EDITION. THESE VALVES SHALL BE

DESIGNED TO CLOSE AUTOMATICALLY IF A DISPENSER IS DISPLACED FROM ITS NORMAL

POSITION. THE VALVES SHALL BE RIGIDLY ANCHORED INDEPENDENTLY OF THE DISPENSER. THE

VALVES SHALL BE TESTED IN ACCORDANCE WITH PEI/RP1200-19, 2019 EDITION, INCORPORATED

BY REFERENCE IN SUBPARAGRAPH 62-762.501(1)(B)8., F.A.C., AT THE TIME OF INSTALLATION BY A

CERTIFIED CONTRACTOR TO CONFIRM THAT THE AUTOMATIC CLOSING FUNCTION OF THE VALVE

OPERATES PROPERLY, AND THAT THE VALVE IS PROPERLY ANCHORED.

I.

RELEASE DETECTION DEVICES SHALL BE INSTALLED AND TESTED IN ACCORDANCE WITH

62-762.701(4) F.A.C.

J.

CONTRACTOR SHALL PROVIDE TANK EXCAVATION HOLE PROTECTION WHEN REMOVING

EXISTING FUEL TANKS UNTIL PAVING IS IN PLACE PER OSHA STANDARD 1910. COVERS AND / OR

GUARDRAILS SHALL BE PROVIDED TO PROTECT PERSONNEL FROM THE HAZARDS OF OPEN PITS,

TANK VATS, DITCHES, ETC.

K.

CONTRACTOR SHALL PROVIDE WRITTEN NOTIFICATION TO FDEP BETWEEN 30-45 DAYS BEFORE

INSTALLATION OF THE ABOVE GROUND STORAGE TANKS TO COMPLY WITH FAC 62-762.

L.

NOTIFICATION SHALL BE RECEIVED BY THE COUNTY IN WRITING OR ELECTRONIC FORMAT

BETWEEN 30 AND 45 DAYS BEFORE THE INITIATION OF THE WORK RELATED TO THE CLOSURE OF

THE EXISTING UNDERGROUND STORAGE TANKS.

M.

CONTRACTOR SHALL SUBMIT COMPLETED REGISTRATION FORM IN PAPER OR ELECTRONIC

FORMAT TO THE DEPARTMENT WITHIN 10 DAYS AFTER COMPLETION OF THE DEMOLITION OF THE

TWO UNDERGROUND FUEL STORAGE TANKS PER 62-762.802(3)(B)8., F.A.C. FOR CLOSURE OF

FUEL TANKS.

N.

A CLOSURE INTEGRITY EVALUATION REPORT FORM FOR ASTS 62-762.901(7), MUST BE PROVIDED

TO THE COUNTY WITH THE NOTIFICATION OF CLOSURE.

O.

CONTRACTOR SHALL TAKE FULL RESPONSIBILITY OF THE ABOVE GROUND STORAGE TANKS.

PROVIDE CERTIFICATE OF LIABILITY FOR THE TANKS UNTIL VCS TAKES OWNERSHIP.

201 N FRANKLIN ST

SUITE 1400

TAMPA, FL 33602

PHONE: 813.620.1460

REGISTRY NO. 35106

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

ARCH/ENGR OF RECORD

JEREMY DEMBOSKI

DESIGNED BY

JTD

ISSUE DATE

3/23/2026

DRAWN BY

SRM

AE PROJECT NUMBER

145642003

SHEET TITLE

FUEL OIL SYMBOLS,

ABBREVIATIONS, SHEET

SPECS AND NOTES

DRAWING NO.

P000

TAG

(N)AST-2

(N)AST-3

(N)AST-1

STP-1

RF-1

RF-2

VC-1

VC-2

TLS

ISENS

INT-CAP

DISP

FM

FE

PART DESCRIPTION

EQUIPMENT LIST

MANUFACTURER

TANK EQUIPMENT

MODEL NUMBER

ABOVEGROUND STORAGE TANK, U.L. 2085 LABELED - BASE BID

ABOVEGROUND STORAGE TANK, U.L. 2085 LABELED - BASE BID

ABOVEGROUND STORAGE TANK, U.L. 2085 LABELED - ADD ALTERNATE

MODERN WELDING

MODERN WELDING

MODERN WELDING

TANK SUMP EQUIPMENT

FIREGUARD, 12,000 GALLON CAPACITY

FIREGUARD, 12,500 GALLON CAPACITY

FIREGUARD, 20,000 GALLON CAPACITY

2 HP FIXED SPEED STP - STPM200-VL2-00

FACTORY INCLUDED THREADED RISER PIPE - ONE PER STP

2"x18" MxMS FIRESHILED FLEX CONNECTOR

2" FULL PORT BALL VALVE

3" FULL PORT BALL VALVE

FE PETRO

FE PETRO

HOSE MASTER

MORRISON

MORRISON

SPILL CONTAINMENT

4" VAPOR SWIVEL ADAPTOR

DURATUFF STAGE VAPOR RECOVER CAP

OPW

OPW

AST VALVES AND FITTINGS

AST PEDESTAL & 1 STABILIZER BAR; W/27.5" Lx 15" W OPENING

AST OVERFILL VALVE 3" FILL 6" INSTALLATION PIPE

SOLENOID VALVE 2" VITON WITH 120 VOLT COIL

15 GALLON REMOTE SPILL CONTAINER WITH (2) 3" OPENING

15 GALLON REMOTE SPILL CONTAINER WITH (1) 3" OPENING

3" DUCTILE IRON SWING CHECK VALVE

3" DRY BREAKS 927

DUST CAP

2" DUCTILE IRON EXTERNAL EMERGENCY VALVE

CLOCK GAUGE WITH BATTERY OPERATED OVERFILL ALARM & 2" FLOAT

2" ATMOSPHERIC VENT CAP

2" PRESSURE/VAC VENT CAP

MORRISON

MORRISON

MORRISON

MORRISON

MORRISON

MORRISON

MORRISON

MORRISON

MORRISON

MORRISON

OPW

OPW

402520901

FSMS180200

691---0800 1V

691---1000 1V

61VSA-1020-EVR

1711T-7085-EVR

434X--17001 AK

9095AA3300AVEVR

710---0200 1V

515---2300 AC

515---0300 AC

246ADI0600 AV

927---0300AAEVR

735DC-4000ACEVR

346DI-0500 AV

918---0100 AG

23-0033

623V-2203

TANK MONITORING EQUIPMENT - VEEDER ROOT TLS 4B SYSTEM

TLS4B CONSOLE, COLOR TOUCH SCREEN DISPLAY, EDIM, UL

TLS4B APPLICATION SOFTWARE, 6 UNIVERSAL INPUTS

EXTERNAL PRINTER FOR TLS4 SERIES CONSOLES (EPSON MODEL: TM-T88V)

WALL MOUNTING BRACKET FOR EXTERNAL PRINTER FOR TLS4 SERIES CONSOLES

SS PROBE, 0.2 MAG PLUS HGP CANISTER, WATER DETECTION, UL, ANY STD LENGTH

INSTALL. KIT, MAG PLUS, PHAST-TWO WATER DETECTOR, 4" FLOAT, 5' CABLE

INSTALL. KIT, MAG PLUS, DIESEL, 4" FLOAT, 5 CABLE

4" NPT RISER CAP AND RING KIT FOR IN-TANK PROBES

MAG PROBE INSTALLATION KIT FOR ABOVEGROUND STORAGE TANK

INTERSTITIAL SENSOR FOR STEEL TANKS (4'-12' TANK I.D.) WITH 16' CABLE

2" INTERSTITIAL SENSOR RISER CAP AND ADAPTOR KIT

OVERFILL ALARM BOX

OVERFILL ALARM ACKNOWLEDGEMENT SWITCH/RESET

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

VEEDER ROOT

860196-020

333435-001

330020-832

330020-839

846397-2xx

886100-000

846400-001

312020-952

312020-984

794390-420

312020-928

790091-001

790095-001

ISLAND EQUIPMENT

1-1/2" EMERGENCY VALVE

GASBOY ATLAS X COMMERCIAL DISPENSER - TWIN - ONE PRODUCT, FRONT LOAD

STAINLESS STEEL-ALL PANELS

PULSE OUTPUT, SINGLE OR DUAL

OPW

GASBOY

GASBOY

GASBOY

10BF-5725

9853GXTW1 DFZ

Z-AT0-ISSA00

Z-AT0-APULID

DISPENSING ACCESSORIES

3/4" DIESEL DISPENSING NOZZLE, GREEN

1" MNPT TO 3/4" FNPT BUSHING

1" CAMTWIST MAGNETIC RECONNECTABLE BREAKAWAY

KIT, GAS - 3/4" BLACK, ERGO, C720, CTM75, 9' X 8"

1" x 20' CURB HOSE

1" x 9" WHIP HOSE

360 HEAVY DUTY HIGH HOSE RETRIEVER

360 HB HOSE BUN

BASE FOR HOSE RETRIEVER

OPW

OPW

CATLOW

CATLOW

FLEXHOSE

FLEXHOSE

PEMCO

PEMCO

PEMCO

FUEL MANAGEMENT SYSTEMS

11B-0100

28R-2404

CTM-100

HAER0002

FLX HW302000

FLXHW300009

FM LIVE, CELLULAR, PROKEE/PROX. CARD READER

TANK MONITORING INTERFACE WIRELESS KIT (RS-232)

PROKEE ENCODER; USB

FMLIVE ANNUAL SUBSCRIPTION SERVICES

FMLIVE SETUP AND ACTIVATION

FMLIVE PROJECT MANAGEMENT

FMLIVE DATABASE CONSTRUCTION AND OR CONVERSION

PROKEES

FUELMASTER

FUELMASTER

FUELMASTER

FUELMASTER

FUELMASTER

FUELMASTER

FUELMASTER

FUELMASTER

MISCELLANEOUS

FMU5720-F2

191F0223

941D0120

FMLIVEBA/2+B1

CLOUDBA/2

PMLIVEBA/2+BI+CELL

FMLIVE-DB-CONSTRUCT

172405

FIRE EXTINGUISHER AND CABINET (PURPLE-K)

AST DECAL PACKAGE

DECAL PACKAGE (PUMP NUMBERS, MAY CONTAIN 10% ETHANOL, ULSD)

QUANTITY

1

1

1

3

3

3

3

2

1

1

3

3

3

1

1

3

3

3

3

3

2

1

1

1

1

1

3

1

2

3

3

3

3

1

1

3

3

3

3

4

4

4

2

4

4

4

4

4

1

1

1

1

1

1

1

300

1

1

3

201 N FRANKLIN ST

SUITE 1400

TAMPA, FL 33602

PHONE: 813.620.1460

REGISTRY NO. 35106

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

ARCH/ENGR OF RECORD

JEREMY DEMBOSKI

DESIGNED BY

JTD

ISSUE DATE

3/23/2026

DRAWN BY

SRM

AE PROJECT NUMBER

145642003

SHEET TITLE

FUEL OIL EQUIPMENT LIST

DRAWING NO.

P001

3/4" CW

3/4" CA

19

18

6 FE

14

INT-CAP

12

11

TLM 10

(N)AST-2

INT-CAP

12

(N)AST-3 11

TLM

9

2" FO-UL

(N)DISP-1

1

RF-1

3

(TYP.)

78

(TYP.()TYP.)

DEF-2

5

FM

(N)STP-1 13

RF-2

78

(TYP.()TYP.)

(N)DISP-1

14

16

2" FO-D

4

7

(N)DISP-1 (TYP.)

2

(TYP.)

2" FO-D

(N)STP-1 13

3

19

(TYP.)

TLM

INT-CAP

12

11

(N)AST-1

15

14

RF-2

(N)STP-1 13

20

3/4" CA

3/4" CW

TRANSPORTATION BLDG

RM 700-10

RM 700-10

TLS

NORTH

17

NEW ENLARGED PLAN

1

1/8" = 1'-0"

PIPING LEGEND

DIESEL

UNLEADED

GENERAL NOTES:

1.

ALL DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE

GENERAL EXTENT OF THE WORK. CONTRACTOR TO BE

RESPONSIBLE FOR COORDINATION WITH OTHER

TRADES BEFORE INSTALLATION OF ALL PLUMBING AND

FUEL OIL SYSTEMS. PIPING LAYOUT SHOWN ON

DRAWINGS IS FOR GENERAL ARRANGEMENT ONLY. ALL

WORK TO BE COORDINATED WITH FIELD CONDITIONS

AND OTHER TRADES INVOLVED AS REQUIRED. DO NOT

SCALE DIMENSIONS FROM THIS DRAWING. ALL

DIMENSIONS TO BE VERIFIED IN FIELD AS REQUIRED.

2.

CONTRACTOR SHALL PROVIDE ALL SUPPORTING AND

HANGING FITTINGS AND EQUIPMENT FOR PROPER

INSTALLATION OF ALL PLUMBING AND FUEL OIL

SYSTEMS.

3.

CONTRACTOR TO COORDINATE AND VERIFY ALL

CLEARANCES BEFORE START OF ANY WORK.

TANK, PIPING, AND INSTALLATION NOTES

1.

ALL NEW FUEL OIL EQUIPMENT, MATERIALS, AND ACCESSORIES SHALL BE INSTALLED AND

TESTED IN ACCORDANCE WITH APPLICABLE MANUFACTURER'S INSTRUCTIONS.

2.

ALL TANK AND PIPING INSTALLATION WORK IS TO BE PERFORMED BY A STATE REGISTERED

POLLUTANT STORAGE SPECIALTY CONTRACTOR.

3.

ALL WORK SHALL BE PERFORMED IN ACCORDANCE WITH APPLICABLE STATE, COUNTY, AND

LOCAL REQUIREMENTS

A.

2023 FLORIDA BUILDING CODE

B.

FLORIDA DEPARTMENT OF ENVIRONMENTAL QUALITY:

a.

62-762 F.A.C. ABOVEGROUND FUEL TANK INSTALLATIONS.

C.

NATIONAL FIRE PROTECTION ASSOCIATION:

a.

30: FLAMMABLE AND COMBUSTIBLE LIQUID CODE

b.

30A: AUTOMOTIVE SERVICE STATION CODE

c.

70: NATIONAL ELECTRIC CODE

D.

AMERICAN PETROLEUIM INSTITUTE

a.

1604: CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS

b.

334: GUIDE TO LEAK DETECTION FOR ABOVEGROUND STORAGE TANKS

c.

340: LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR

ABOVEGROUND STORAGE FACILITIES

d.

E.

PETROLEUM EQUIPMENT INSTITUTE:

a.

RP 200 INSTALLATION OF ABOVEGROUND STORAGE SYSTEMS

b.

RP 500 INSPECTION & MAINTENANCE OF MOTOR FUEL DISPENSING EQUIPMENT

c.

RP 600 OVERFILL PREVENTION FOR ASTS

F.

OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION:

a.

CONSTRUCTION SAFETY AND HEALTH REGULATIONS SUBPART P, 1902.50 THRU

1926.653

G.

MANUFACTURER'S STANDARDIZATION SOCIETY

a.

MSS SP-58: PIPE HANGERS AND SUPPORTS

H.

THE CONTRACTOR SHALL BE RESPONSIBLE FOR SCHEDULING UNDERGROUND

UTILITIES IDENTIFICATION BY CONTACTING FL. ONE CALL (1-800-432-4770) AND

APPLICABLE MUNICIPAL JURISDICTION AT LEAST 48 HOURS PRIOR TO START OF

CONSTRUCTION.

I.

THE CONTRACTOR SHALL BE RESPONSIBLE FOR GIVING REQUIRED NOTICE(S) AND

SCHEDULING APPLICABLE CITY, COUNTY AND / OR STATE INSPECTIONS AS REQUIRED

FOR PERMIT CLOSE OUT(S).

KEYNOTES

1 UNLEADED DOUBLE-WALLED ABOVEGROUND STORAGE TANK

2 DIESEL DOUBLE-WALLED ABOVEGROUND STORAGE TANK

3 2" SINGLE-WALLED PIPING. PIPE TO SLOPE AT A MINIMUM SLOPE OF 1/8"

PER FOOT BACK TO TANK.

4 EXISTING DISPENSER TO BE DEMOLISHED.

5 EXISTING DEF SYSTEM TO BE RELOCATED TO NEW FUEL ISLAND.

6 INSTALL NEW FIRE EXTINGUISHER

7 PAINTED CARBON STEEL PIPE TO BE SUPPORTED AT LEAST EVERY 10

FT.

8 STEEL PIPE TO BE ROUTED AT A HEIGHT BELOW THE CANOPY, 16'

CLEARANCE TO PAVEMENT.

9 ATMOSPHERIC VENT CAP

10 PRESSURE/VACUUM VENT CAP

11 EMERGENCY VENT FOR TANK SPACE

12 EMERGENCY VENT FOR INTERSTITIAL SPACE

13 SUMERSIBLE TURBINE PUMP

14 REMOTE FILL LINE, FUEL FLOWS THROUGH OVERFILL PROTECTION

VALVE, REFER TO TANK DETAIL.

15 DIESEL DOUBLE-WALLED ABOVEGROUND STORAGE TANK TO BE

REPLACED AS AN ADD-ALTERNATE.

16 EMERGENCY SHUTOFF DEVICE RELOCATED TO BE A MINIMUM OF 20'

AND A MAXIMUM OF 100' FROM THE DISPENSING EQUIPMENT. SECURE

TO 4'X4' CONCRETE POST.

17 TIE IN NEW DOMESTIC COLD WATER AND COMPRESSED AIR PIPING

INTO EXISTING PIPES IN BETWEEN TWO ROLL UP DOORS.

18 ROUTE NEW DOMESTIC COLD WATER AND COMPRESSED AIR PIPING

UNDERGROUND AROUND THE PROPOSED TANKS TO CONNECT TO NEW

HOSE BIB (ZURN MODEL Z1341 OR EQUIVALENT) AND BRASS

SLEEVE-TYPE QUICK CONNECT (WEATHERHEAD MODEL 27131613 OR

EQUIVALENT) ON NEW FUEL ISLAND. BOTH CONNECTIONS SHALL BE

MOUNTED AT 36".

19 CONTRACTOR TO LABEL CANOPY CLEARANCE HEIGHT ON THIS SIDE OF

CANOPY.

20 EXISTING FUEL ISLAND AND EQUIPMENT TO BE DEMOLISHED AFTER

COMPLETION OF NEW FUEL ISLAND.

ELECTRICAL NOTES

1.

ELECTRICAL INSTALLATION SHALL COMPLY WITH NEC 2020.

2.

N.E.C. ARTICLE 514 CONDITIONS FOR HAZARDOUS AREAS AND FUEL DISPENSING FACILITIES

APPLY.

3.

PROVIDE EXPLOSION PROOF SEAL-OFFS IN ACCORDANCE WITH ARTICLES 514.3 AND 514.9(A) &

(B) FOR ALL CONDUITS IN CLASS 1 HAZARDOUS LOCATIONS, INCLUDING LOW VOLTAGE

CONDUITS.

4.

CIRCUIT DISCONNECTS TO BE PROVIDED AS PER NEC 514.11(A) AND NEC 514.13.

5.

EXTERIOR EMERGENCY CONTROLS TO BE INSTALLED AS PER NEC 514.11(B). REFER TO

KEYNOTE #16 FOR LOCATION.

6.

ALL UNDERGROUND ELECTRICAL CONDUIT TO BE SCHEDULE 40 PVC MAY BE USED EXCEPT FOR

THE LAST 10' IN THE HAZARDOUS AREAS. PVC COATED GALVANIZED RIGID CONDUIT (GRC)

SHALL BE INSTALLED FOR THE LAST 10' ON ALL SUMP PENETRATIONS, DISPENSER STUB-UPS,

CANOPY COLUMN STUB-UPS AND BUILDING STUB-UPS AND TO BE BURIED AT MIN. 24".

7.

PROVIDE BONDING/GROUNDING OF ALL PIPING AND EQUIPMENT AS INDICATED ON THE

ELECTRICAL DRAWINGS.

FUEL OIL DESIGN SCOPE

PROVIDE ALL LABOR, MATERIALS, AND EQUIPMENT TO COMPLETE INSTALLATION OF NEW FUEL

STORAGE TANKS, PRODUCT PIPING, DISPENSERS, AND MISCELLANEOUS ACCESSORIES AS DETAILED IN

THIS PLAN SET

1.

SET TANKS, ANCHOR NEW 10.5' ø 20,000 GALLON DOUBLE WALLED DIESEL, 10.5' ' 12,500 GALLON

DOUBLE WALLED DIESEL, AND 10.5' Ø 12,000 GALLON DOUBLE WALLED UNLEADED STORAGE

TANKS. INSTALL NEW FILLS, VAPOR, VENT, TURBINE, GAUGE AND LEAK DETECTION EQUIPMENT

AND STATIC GROUNDING CONNECTIONS.

2.

TANKS, PIPING, AND ALL PETROLEUM EQUIPMENT AND ACCESSORIES TO BE PROVIDED AND

INSTALLED BY CONTRACTOR UNLESS NOTED OTHERWISE.

3.

SET NEW DISPENSER PEDESTAL BOXES PER PLAN; INSTALL NEW SINGLE-WALL PIPING FROM

NEW TANK STP'S ROUTED ABOVE NEW CANOPY, PENETRATE CANOPY, THEN ROUTED DOWN TO

EACH PEDESTAL. PIPE NEW PEDESTAL BOXES TO RECEIVE NEW DISPENSERS AND TEST.

4.

INSTALL NEW CONDUITS AND WIRING FROM TANKS AND EACH DISPENSER LOCATION. CONNECT

TO STP, DISPENSER, AND GAS EQUIPMENT CIRCUITS INSIDE BUILDING.

5.

INSTALL NEW TLS-4B TANK LEVEL GAUGES, ANNULAR SPACE SENSORS, WIRING, AND

CONNECTIONS.

6.

SET AND CONNECT THREE (3) NEW GASBOY FUEL DISPENSERS: TWIN NOZZLE, ONE-PRODUCT

DISPENSERS. INSTALL NEW HOSES, NOZZLES, BREAKAWAYS. STARTUP, PURGE, AND CALIBRATE.

7.

EMERGENCY STOP DISCONNECTS TO BE INSTALLED AT BOLLARD INDICATED ON DRAWINGS.

8.

INSTALL NEW NFPA 30A 9.2.5.4 WARNING SIGNS: "NO SMOKING, STOP MOTOR" AT EACH

DISPENSER.

9.

INSTALL NEW NFPA 5 LB 40 BC (MIN) ADA ACCSSIBLE FIRE EXTINGUISHER AT DISPENSER ISLAND.

FIRE EXTINGUISHING SYSTEMS ARE REQUIRED TO BE INSPECTED AND TAGGED BY A LICENSED

FIRE EXTINGUISHER CONTRACTOR AND MAINTAINED YEARLY.

10. NFPA SIGNAGE TO BE PROVIDED AND INSTALLED BY CONTRACTOR.

LOCAL FIRE AUTHORITY NOTES

1.

ALL WORKMANSHIP, MATERIALS, EQUIPMENT, TESTING, AND INSPECTIONS RELATED TO THE

FUEL OIL SYSTEM INSTALLATION AS DESCRIBED HERE-IN SHALL BE IN ACCORDANCE WITH:

A.

F.A.C. 62-762: ABOVEGROUND STORAGE TANK SYSTEMS

B.

NFPA 30:

FLAMMABLE AND COMBUSTIBLE LIQUID CODE

C.

NFPA 30A:

AUTOMOTIVE SERVICE STATION CODE

2.

PRIOR TO THE FINAL INSPECTION, APROVED PERMID DOCUMENTS PREPARED BY THE

CONTRACTOR MUST BE SUBMITTED TO THE LOCAL FIRE AUTHORITY'S OFFICE.

201 N FRANKLIN ST

SUITE 1400

TAMPA, FL 33602

PHONE: 813.620.1460

REGISTRY NO. 35106

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

ARCH/ENGR OF RECORD

JEREMY DEMBOSKI

DESIGNED BY

JTD

ISSUE DATE

3/23/2026

DRAWN BY

SRM

AE PROJECT NUMBER

145642003

SHEET TITLE

FUEL OIL NEW PLAN

DRAWING NO.

P101

(E)AST-1 9

11

3

2

(E)UST-1 9

1

3

4

(E)UST-2 9

10

(TYP.)

4

(E)DISP-1

5

6

DEF-1 7

10

(TYP.)

10

(TYP.)

13

6

5 (E)DISP-2

14

GENERAL NOTES:

1.

ALL DRAWINGS ARE DIAGRAMMATIC AND INDICATE THE

GENERAL EXTENT OF THE WORK. CONTRACTOR TO BE

RESPONSIBLE FOR COORDINATION WITH OTHER

TRADES BEFORE INSTALLATION OF ALL PLUMBING AND

FUEL OIL SYSTEMS. PIPING LAYOUT SHOWN ON

DRAWINGS IS FOR GENERAL ARRANGEMENT ONLY. ALL

WORK TO BE COORDINATED WITH FIELD CONDITIONS

AND OTHER TRADES INVOLVED AS REQUIRED. DO NOT

SCALE DIMENSIONS FROM THIS DRAWING. ALL

DIMENSIONS TO BE VERIFIED IN FIELD AS REQUIRED.

2.

CONTRACTOR SHALL PROVIDE ALL SUPPORTING AND

HANGING FITTINGS AND EQUIPMENT FOR PROPER

INSTALLATION OF ALL PLUMBING AND FUEL OIL

SYSTEMS.

3.

CONTRACTOR TO COORDINATE AND VERIFY ALL

CLEARANCES BEFORE START OF ANY WORK.

KEYNOTES

1 EXISTING 12,500 GALLON DIESEL UST TO BE REMOVED. DIMENSIONS

ARE APPROXIMATE.

2 EXISTING 6,000 GALLON UNLEADED UST TO BE REMOVED. DIMENSIONS

ARE APPROXIMATE.

3 EXISTING PUMP SUMP TO BE DEMOLISHED WITH UST.

4 EXISTING SPILL BUCKET TO BE DEMOLISHED WITH UST.

5 EXISTING DISPENSER TO BE DEMOLISHED.

6 CANOPY COLUMN, REFER TO STRUCTURAL DRAWINGS.

7 EXISTING DEF SYSTEM TO BE RELOCATED TO NEW FUEL ISLAND.

8 EXISTING EMERGENCY FUEL SHUT OFF TO BE DEMOLISHED,

REPLACED, AND RELOCATED. REFER TO NEW PLAN

9 STORAGE TANKS SHALL BE REMOVED ACCORDING TO NFPA 30.21

INCLUDING ALL LIQUIDS AND RESIDUES SHALL BE REMOVED; THE

TANK, APPURTENANCES, AND PIPING SHALL BE PURGED OF FLAMMALE

VAPORS AND SHALL BE TESTED BY A COMBUSTIBLE GAS INDICATOR;

ALL EXPOSED PIPING, GAUGING, AND TANK FIXTURES (OTHER THAN

THE VENT) SHALL BE DISCONNECTED AND REMOVED; AND THE TANK

SHALL BE COMPLETELY FILLED WITH AN INERT SOLID MATERIAL.

10 ALL UNDERGROUND PIPING IS TO BE REMOVED AND DISPOSED OF.

11 EXISTING 20,000 GALLON ABOVEGROUND STORAGE TANK TO BE

REPLACED AS AN ADD-ALTERNATE.

12 EXISTING VEEDER-ROOT CONTROL CONSOLE MODEL TLS-350 TO BE

DEMOLISHED AND REPLACED WITH NEW SYSTEM.

13 EXISTING FUELMASTER FUEL MANAGEMENT SYSTEM TO BE

DEMOLISHED.

14 EXISTING DOMESTIC WATER AND COMPRESSED AIR PIPING TO BE

DEMOLISHED.

201 N FRANKLIN ST

SUITE 1400

TAMPA, FL 33602

PHONE: 813.620.1460

REGISTRY NO. 35106

This document is an instrument of service prepared

solely for Kimley-Horn's client and for a particular

purpose. Any other use or reliance is without liability to

Kimley-Horn.

DEMOLITION NOTES

1.

A PHASING PLAN MUST BE DEVELOPED SO THAT THE EXISTING FUELING FACILITY REMAINS

OPERATIONAL UNTIL THE NEW FUELING FACILITY HAS BEEN CONSTRUCTED, COMMISSIONED,

AND IS FULLY OPERATIONAL.

2.

COORDINATE WITH THE CLIENT PRIOR TO DEMOLISHING ANY FUEL TANK, PIPING, OR RELATED

ELEMENTS. COORDINATE WITH THE CLIENT ON THE REMOVAL AND DISPOSAL OF THE EXISTING

GAUGING SYSTEMS AND OTHER AUTOMATING EQUIPMENT WITHIN 30 DAYS OF

REMOVAL/DEMOLITION.

3.

DEFINITIONS:

A.

DEMOLISH: REMOVE IN ITS ENTIRETY

B.

SALVAGE: REMOVE AS INDICATED AND PROVIDE TO THE CLIENT. DOCUMENT THAT THE

ITEM HAS BEEN REMOVED.

4.

CONTRACTOR MUST PROVIDE EROSION CONTROL MEASURES PRIOR TO PERFORMING ANY

DEMOLITION WORK.

5.

A HAZARDOUS MATERIALS SURVEY HAS NOT BEEN CONDUCTED AS PART OF THIS DESIGN.

6.

ASSUME EXISTING TANKS AND PIPING ARE PARTIALLY FULL OF PRODUCT AND RESIDUAL

PETROLEUM WASTE. THE CONTRACTOR MUST BE RESPONSIBLE FOR THE REMOVAL,

STORAGE, TRANSPORTATION, AND PROPER DISPOSAL OF REMAINING PRODUCT IN THE TANKS

AND PIPING ONCE THEY ARE READY FOR DEMOLITION AND REMOVAL. GOOD PRODUCT

REMAINING IN THE TANK MUST BE RETURNED TO THE CLIENT FOR REUSE. CONTRACTOR

MUST ASSUME RESPONSIBILITY FOR ANY RESIDUAL OIL, WATER, SLUDGE, OR UNACCEPTABLE

PRODUCT AND MUST REMOVE, STORE, TRANSPORT, AND DISPOSED OF THIS WASTE IN

ACCORDANCE WITH APPLICABLE REQUIREMENTS.

TRANSPORTATION BLDG

RM 700-10

RM 700-10

8

12

NORTH

DEMO PLAN

1

1/8" = 1'-0"

ARCH/ENGR OF RECORD

JEREMY DEMBOSKI

DESIGNED BY

JTD

ISSUE DATE

3/23/2026

DRAWN BY

SRM

AE PROJECT NUMBER

145642003

SHEET TITLE

FUEL OIL DEMO PLAN

DRAWING NO.

PD102

Commodity Codes

• NAICS 237120Oil and Gas Pipeline and Related Structures Construction

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.