Project Information

Bid Title

BeCI TPU Building Replacement

Issuing Agency

Ohio Facility Construction Commission

Location

Ohio

Published Date

Jan 21, 2026

Closing Date

Feb 24, 2026

Government Level

State & Local

Status

Closed

Ref. #

DRC-23F128

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Publish Date

Due Date

Project Number

Owner

Project Name

Primary Service

Estimated Project Cost

Q&A

Short List

Notes

1/21/2026

2/24/2026

DRC-23F128

Department of Rehabilitation and Corrections

BeCI TPU Building Replacement

CM-R

$30,000,000

N/A

TBD

Attachment Preview

Request for Qualifications (CM at Risk Contract) continued

Administration of Project: Ohio Facilities Construction Commission

Project Name BeCI TPU Building Replacement

Project Location 68518 Bannock RD/ SR 331

City / County St. Clairsville / Belmont

Owner

Dept. of Rehabiliation and Corrections

Delivery Method CM at Risk

No. of paper copies requested (stapled, not bound) 0

Response Deadline 02/24/2026

4:00PM

Project Number

Project Manager

DRC-23F128

Robin Faires

Contracting Authority OFCC

Prevailing Wages

State

No. of electronic copies requested (PDF)

local time

1

Submit the requested number of Statements of Qualifications (Form F110-330) directly to Procurement at

procurement@ofcc.ohio.gov . See Section G of this RFQ for additional submittal instructions.

Submit all questions regarding this RFQ in writing to Procurement at procurement@ofcc.ohio.gov with the project number

included in the subject line (no phone calls please). Questions will be answered and posted to Opportunities page on the

OFCC website at https://ofcc.ohio.gov on a regular basis until one week before the response deadline. The name of the party

submitting a question will not be included on the Q&A document.

Project Overview

A. Project Description

Belmont Correctional Institute (BeCI) is an adult minimum to medium-security prison facility operated by the Ohio

Department of Rehabilitation and Correction (ODRC). BeCI was constructed in 1993 - 1994 and is comprised of

approximately 15 buildings with a prison population of 2,673. The Transitional Program Unit (TPU) (Bldg 4) is 16,831

square feet. TPU was previously referred to as a ‘segregation’ unit.

It is the intent of ODRC to demolish this building and replace it with a new stand-alone TPU building. The location of the

new building has been decided and is within the current confines of the secure perimeter.

The project will utilize multiple GMP packages to accomplish the goals of the facility.

The development of a complete Program of Requirements (POR) has been completed which includes a comprehensive

survey/field investigation of the building site, existing building and building systems

B. Scope of Services

The selected Construction Manager at Risk (“CM”), as a portion of its required Scope of Services and prior to submitting

its proposal, will discuss and clarify with the Contracting Authority and/or Owner, the breakdown of the Agreement

detailed cost components, to address the Owner’s project requirements and refine the project schedule. Participate in the

Encouraging Diversity, Growth & Equity (EDGE) Program as required by statute and the Agreement.

As required by the Agreement, and as properly authorized, provide the following categories of services: provide

constructability review comments on documents produced by the A/E during the Schematic Design, Design Development,

and Construction Document stages; develop and maintain estimates of probable construction cost, value engineering,

project schedules, and construction schedules; lead and manage the Subcontractor Prequalification and Bidding process,

Construction and Closeout Stage.

Refer to the Ohio Facilities Construction Manual for additional information about the type and extent of services required

for each. A copy of the standard Agreement can be obtained at the OFCC website at https://ofcc.ohio.gov.

The preconstruction and construction services are generally described below. Subcontracts including but not limited to

Plumbing, Fire Protection, HVAC, Electrical and AV/Technology will be awarded by the CM to prequalified vendors using

a competitive process. The parties will engage in an “open book” pricing method in which all subcontracted work shall be

based upon competitive pricing that will be reviewed by the Contracting Authority and/or Owner, the A/E and the CM. The

Contracting Authority and/or Owner shall have access to all books, records, documents and other data in the CM's

possession related to itself, its subcontractors and material suppliers pertaining to bidding, pricing or performance of the

Agreement.

F170-01-2022-MAR

Publish Date: 1/21/2026

Page 1 of 5

Request for Qualifications (CM at Risk Contract) continued

Preconstruction Services: The CM will work cooperatively with the Contracting Authority and/or Owner, A/E, and Project

Team, and will provide, among other services, schedule development, estimate development, Guaranteed Maximum

Price (“GMP”) proposal, subcontractor prequalification and bidding, constructability review, permits, budgeting, value

engineering, and preconstruction planning throughout the preconstruction stages. When the drawings and specifications

are at the stage of completion specified in the Agreement, such partially completed documents (the “Basis Documents”)

shall be provided to the CM, together with the A/E's detailed listing of any incomplete design elements and the A/E’s

statement of intended scope with respect to such incomplete elements (the “Design Intent Statement”). Contingent upon

the Contracting Authority’s approval of the GMP, the parties will enter into an amendment to the Agreement establishing

the Contract Sum (“GMP Amendment”). If the proposed Contract Sum exceeds the Project Budget established for

construction, then the Contracting Authority may terminate the agreement with the CM and seek proposals from other

firms for completion of the Project.

Construction Services: The CM shall construct the Project pursuant to the construction documents and in accordance with

the schedule requirements. The CM shall hold all subcontracts and shall be fully responsible for the means and methods

of construction, project safety, project completion within the schedule agreed upon in the preconstruction phase,

compliance with all applicable laws and regulations including monitoring compliance with all EDGE, equal employment,

and prevailing wage requirements, and submitting monthly reports of these activities to the Contracting Authority. All

subcontracts shall be on the subcontract form prescribed by OAC Section 153:1-03-02. The Contracting Authority

reserves the right to approve the CM’s selection of subcontractors and any supplemental terms to the form subcontract.

For purposes of completing the Relevant Project Experience Matrix in Section F of the Statement of Qualifications (Form

F110-330), below is a list of relevant scope of work requirements for this RFQ:

1. Project Delivery Method (CM at Risk)

2. Role on Project: CMR

3. Correction facility project experience.

4. Experience with ACA and PREA standards

5. Experience with ODRC Prison design standards per ORC 5120.10 and OAC 5120:1-7-01.

6. Experience with secured/sensitive occupied facility including phased construction.

7. Experience with OFCC, OAKS CI.

8. Experience with construction cost estimating and analysis.

C.

Funding / Estimated Budget

Total Project Cost $30,000,000.00

Construction Cost $24.000,000.00

State Funding $30,000,000.00

Other Funding $0

D.

Anticipated Schedule

CM Preconstruction Services Start

Construction Stage Notice to Proceed

Substantial Completion of all Work

CM Services Completed

F. Evaluation Criteria for Selection

05 / 26

07 / 27

04 / 28

07 / 28

E.

EDGE Participation Goal

Percent of the CM’s total compensation

excluding CM’s Contingency*

5.0%

*Preconstruction Stage Compensation plus Contract Sum

minus CM’s Contingency

Selection Criteria: The CM will be selected using (i) qualifications-based process during the Request for Qualifications

(“RFQ”) stage to develop a short list and (ii) best value process during the Request for Proposal stage. The qualifications-

based criteria for the RFQ is included in this announcement. The best value criteria used in evaluating proposals from

short listed firms will include such factors that are determined to derive or offer the greatest value to the State and Owner,

combining both qualifications and fee.

Short List: Each firm responding to this RFQ will be evaluated and selected based on its qualifications and the

qualifications and experience of the particular individuals identified as the candidate's proposed team for the Project. After

evaluating the responses to this RFQ, the Contracting Authority will select a short list of no fewer than three candidates

that it considers to be the most qualified, except if the Contracting Authority determines that fewer than three firms are

qualified, it will only select the qualified firms.

Request for Proposal: The short-listed firms shall be sent a Request for Proposal (“RFP”) that will invite the firms to submit

pricing proposals containing their proposed preconstruction stage compensation, construction stage personnel costs,

F170-01-2022-MAR

Publish Date: 1/21/2026

Page 2 of 5

Request for Qualifications (CM at Risk Contract) continued

itemized construction stage general conditions costs, construction stage contingency percentage, and construction stage

fee percentage. The short-listed candidates will also receive (i) form of Agreement with the Contracting Authority

containing the contract terms and conditions, (ii) set of the most recent design documents and (iii) proposed Project

schedule.

Pre-Proposal Meeting: Prior to submitting a response to the RFP, the short-listed firms will be invited to meet individually

with the Contracting Authority and/or Owner. The purpose of the pre-proposal meeting is to permit the short-listed firms an

opportunity to ask the Contracting Authority and/or Owner questions in an individual setting to help the firms prepare their

responses to the RFP. The Contracting Authority will notify each short-listed firm to schedule individual times for the pre-

proposal meetings.

Interview: After submitting responses to the RFP, the short-listed firms will be interviewed by the Contracting Authority and

Owner. The purpose of the interview will be to meet the proposed Project team, become familiar with key personnel, and

understand the project approach and ability to meet the stated objectives for the Project. Please be prepared to discuss

with specificity the firm’s capacity to conduct this work in compliance with the timetable, budget and EDGE expectations.

The Contracting Authority will notify each short-listed firm to schedule individual times for the interviews.

Selection Schedule: Tentative schedule is subject to change.

RFP issued to the Short-Listed Firms

Interviews

Selection of CM

02/27/2026

03/27/2026

03/31/2026

Cancellation and Rejection: The Contracting Authority reserves the right to reject all proposals and cancel at any time for

any reason this solicitation, any portion of this solicitation or any phase of the Project. The Contracting Authority shall

have no liability to any proposer arising out of such cancellation or rejection. The Contracting Authority reserves the right

to waive minor variations in the selection process.

Interested CM firms are required to address how they will implement Building Information Modeling (“BIM”) on the project,

experience and level of training of staff related to BIM, incorporation of team partners that have previous BIM experience,

and an understanding of collaborative BIM processes, including but not limited to the State of Ohio BIM Protocol available

at the OFCC website at https://ofcc.ohio.gov.

Interested CM firms are required to submit the Commitment to Participate in the EDGE Business Assistance Program

form in its Statement of Qualifications (Form F110-330) submitted in response to the RFQ, to indicate its intent to contract

with and use EDGE-certified Business Enterprise(s), as a part of the CM’s team. The Intent to Contract and to Perform

and / or waiver request letter and Demonstration of Good Faith Effort form(s) with complete documentation must be

attached to the CM’s Proposal. Both forms can be accessed via the OFCC website at https://ofcc.ohio.gov. The Intent to

Contract and to Perform form is again required at the Fee Proposal stage.

If the CM firm intends to receive points for exceeding the EDGE Participation Goal, it must provide BOTH a

completed Commitment to Participate form AND a completed Statement of Intent to Contract and to Perform forms

signed by both parties with its Statement of Qualifications.

For all Statements of Qualifications, please identify the EDGE-certified Business Enterprises, by name, which will

participate in the delivery of the proposed professional services solicited in the RFQ.

Interested CM firms must indicate on their Statement of Qualifications, the locations where their services will be performed

in the spaces provided or by attachment in accordance with the requirements of Executive Order 2019-12D related to

providing services only within the United States and the requirements of Executive Order 2022-02D prohibiting purchases

from or investment in any Russian institution or company. Failure to do so may cause their Statement of Qualifications to

be rejected.

G. Submittal Instructions

Firms are required to submit the current version of Statement of Qualifications (Form F110-330) available via the OFCC

website at https://ofcc.ohio.gov.

Electronic submittals should be combined into one PDF file named with the project number listed on the RFQ and your

firm’s name. Use the “print” feature of Adobe Acrobat or similar software for creating a PDF rather than using a scanner. If

F170-01-2022-MAR

Publish Date: 1/21/2026

Page 3 of 5

Request for Qualifications (CM at Risk Contract) continued

possible, please reduce the file size of the PDF. In Acrobat, go to Advanced, then PDF Optimizer. Also, please insert the

project number and firm name followed by “SOQ” in the email subject line.

Statements of Qualifications must be submitted electronically by email. Submittals are limited to one email with a

maximum file size of 25 MB.

Unless otherwise noted or exempt, all documents submitted to the Contracting Authority in response to this RFQ and

subsequent RFP are public and will be available for inspection at the conclusion of the selection process. The following

information shall remain confidential and will not be released: (1) Proposal Form(s), except for cost category subtotals

which will be transferred to the Best Value Rating Form; (2) Financial Capacity; and (3) Bonding/Insurance.

Proposers are requested to submit the following information in response to this RFQ within Section H of Form F110-330.

1. Summary: Provide a summary, on one page or less, describing why your firm/team is the most qualified for the

Project.

2. Bonding/Insurance: Provide evidence of capacity to provide bonding in the amount of the construction budget

(e.g. a letter from your Surety agent stating that one or more Sureties will issue Bonds in the amount of the

construction budget if your team is selected) and a copy of the firm's certificate of insurance showing the firm's

current limits of liability for commercial general liability, employer's liability, business automobile liability, and

professional liability insurance.

3. Management Systems: Describe the scheduling and cost control systems the firm would propose to use for the

Project

4. Self-Performed Work: Indicate whether the firm intends to self-perform any work on the Project through a

competitive process and, if so, the nature of the work and capability to self-perform.

5. Estimating: Demonstrated track record of performance of in-house estimating on projects comparable to the

Project.

6. Scheduling: Demonstrated track record of performance managing projects to the original schedule.

Firms are requested to identify professional registrations, memberships and credentials including but not limited to:

LEED GA, LEED AP, LEED AP+, CCCA, CCM, CCS, CDT, CPE, DBIA, and any other appropriate design and

construction industry credentials. Identify that information on the resume page for individuals in Block 22, Section E of the

F110-330 form.

F170-01-2022-MAR

Publish Date: 1/21/2026

Page 4 of 5

CM at Risk Selection Rating Form

State of Ohio Standard Forms and Documents

Project Name BeCI TPU Building Replacement

Project Number DRC-23F128

Proposer Firm

City, State, Zip

Selection Criteria

1. Primary Firm Location and Workload (Maximum 10 points)

a. Proximity of firm to project site

b. Amount of contracts awarded by Contracting

Authority in previous 24 months

Less than 100 miles

100 miles to 150 miles

More than 150 miles

Less than $5,000,000

$5,000,000 to $10,000,000

More than $10,000,000

2. Primary Qualifications (Maximum 40 points)

a. Project management lead

b. Project administration lead

c. Technical staff

d. Construction administration staff

Experience / ability of project manager to

manage scope / budget / schedule / quality

Experience / ability to effectively administer

project controls and processes

Experience / ability of technical staff to

develop accurate estimates and schedules

Experience / ability of field representative to

identify and solve issues during construction

3. Key Consultant Qualifications (Maximum 10 points)

a. Key consultants

b. Proposed EDGE-certified Consultant participation*

Experience / ability of key consultants to

perform effectively and collaboratively

One point for every 2 percent increase in

Services compensation** over the EDGE

participation goal

4. Overall Team Qualifications (Maximum 10 points)

a. Previous team collaboration

b. LEED*** Registered / Certified project experience

c. BIM project experience

d. Team organization

Less than 2 sample projects

2 to 4 sample projects

More than 4 sample projects

Registered LEED v4 or v4.1 projects

Certified LEED v4 or v4.1 projects

Training and knowledge

Direct project experience

Clarity of responsibility / communication

demonstrated by table of organization

5. Overall Team Experience (Maximum 30 points)

a. Previous team performance

b. Experience with similar projects / delivery methods

c. Budget and schedule management

d. Knowledge of Ohio Capital Improvements process

Past performance as indicated by

evaluations and letters of reference

Less than 2 projects

2 to 4 projects

More than 4 projects

Performance in completing projects within

original construction budget and schedule

Less than 2 projects

2 to 4 projects

More than 4 projects

Value

5

2

0

5

2

0

0 - 10

0 - 10

0 - 10

0 - 10

Max =

30

0-5

0-5

1

2

3

Max =

3

1 Max =

2

2

1 Max =

3

3

0-2

0 - 10

0-3

4-6

7 - 10

0-5

0-1

2-3

4-5

Score

* Must be comprised of consulting firm(s) and NOT the lead firm - For more information on scoring this and

other criteria refer to Document F199-01 - PS Selection Rating Rubric.

** Preconstruction Stage Compensation plus Contract Sum minus Subcontracted Work, Self-performed

Work, and CM’s Contingency

*** Leadership in Energy & Environmental Design administered by Green Business Certification Inc.

Notes:

Evaluator:

Name

Subtotal

F170-01-2022-MAR

Signature

Publish Date: 1/21/2026

Date

Page 5 of 5

Commodity Codes

• NAICS 236220Commercial and Institutional Building Construction

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.