Project Information

Bid Title

REQUEST FOR BIDS FOR PISTOL SHOOTING BENCHES PROJECT

Issuing Agency

Clear Creek County

Location

Colorado

Published Date

May 28, 2026

Closing Date

Jun 10, 2026

Government Level

State & Local

Status

Closed

Ref. #

SP-01

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Bid Number:	SP-01
Bid Title:	REQUEST FOR BIDS FOR PISTOL SHOOTING BENCHES PROJECT
Category:	Special Projects
Status:	Open

Description: REQUEST FOR BIDS CLEAR CREEK COUNTY, COLORADO SP – 01 STANDING PISTOL BENCHES PROJECT General Notice Clear Creek County, Colorado (Owner) is requesting Bids for the construction of 7 metal standing pistol benches for a new public shooting range. The Project includes the following work: Three (3) benches: 10’L x 22”W x 34.5”H - each with shelf underneath Two (2) benches: 8’L x 22”W x 34.5”H - each with shelf underneath One (1) bench: 6’L x 22”W x 34.5”H One (1) bench: 4’L x 22”W x 34.5”H ? All benches must be p owder-coated steel and designed to be a nchored to the concrete slab ? Bid installation cost should be a separate line item . Installation is optional; if choosing not to include installation, please note that on your bid . ? Bid shall include estimated fabrication lead time and delivery/installation time All Bids for the Project will be received until 10:00 AM local time on Tuesday, June 10, 2026 by means of a PDF copy emailed to Lisa Leben at For security reasons, you must enable JavaScript to view this E-mail address. and Matt Taylor For security reasons, you must enable JavaScript to view this E-mail address. Submittal Information: PDF copy emailed to For security reasons, you must enable JavaScript to view this E-mail address. and For security reasons, you must enable JavaScript to view this E-mail address. Contact Person: Lisa Leben: For security reasons, you must enable JavaScript to view this E-mail address. 1. Scope Provide all labor, materials, fabrication, welding, surface preparation, powder coating, and related work necessary to manufacture metal shooting stands in accordance with the project drawings, specifications, and applicable industry standards. 2. Minimum Material Requirements Steel Materials Structural steel tubing,sheet metal, and shapes shall be new material meetingminimumASTM standards,minimum material thickness unless otherwise noted: 12 gaugeminimum for sheet steel Uprights/legs: 11 gauge minimum Baseplatemountingcomponents:1/4inch minimum Material shall be free from excessive rust, scale, laminations, warping, or surface defects. Hardware Bolts, nuts, and washers shall be zinc-plated orequivalent rust resistantmaterial orcoating. All threaded fasteners shall include locking features or lock washers. 3. Fabrication Requirements Fabrication shall conform to recognized industry standards and best practices. Components shall be accurately cut, fitted, and assembled tomaintaindimensional consistency. Sharp edges and burrs shall be removed. Holes and slots shall be cleanlydrilled, punchedorplasmacut and free from excessive slag. Assemblies shall be square, level, and free from visible distortion. 4. Welding Requirements Welding shall conform to current AWS D1.1 Structural Welding Code – Steel. Acceptable welding processesGMAW (MIG) Welds shall be continuousall the way around joints or connections. Welds shallexhibit: Full fusion Uniform appearance No cracks, undercut, porosity, overlap, or spatter Welded assemblies shall remainsquare andtrue 5. Surface Preparation Prior to coating, all steel surfaces shall be properly prepared as follows: Remove oil, grease, dirt, weld spatter, oxidation, and contaminants. Surface profile shall be suitable for powder coat adhesion per coating manufacturer recommendations. 6. Powder Coat Finish Requirements Coating System Apply thermoset polyester powder coating suitable for exterior industrial use. Coating shall provide resistance to: UV exposure Moisture Abrasion Corrosion Finish Quality Final finish shall be: Uniform in color and texture Free of runs, pinholes, fisheyes, blistering, bare spots, or contamination. All edges, corners, welds, and concealed surfaces shall receive complete coverage. Color Standard color:(color)semi-gloss unless otherwise specified. 7. Inspection and Acceptance Clear Creek Countyreserves the right to inspect materials, quality, dimensions, and coating finish prior to acceptance. Productsexhibitingdefects, coating failure, excessive warping, or poor workmanship may be returned for repair. 8. Warranty Coating adhesion for a minimum period of one (1) year from delivery under normal use conditions. Warranty shall exclude damage caused by abuse, improper installation, or impact. Publication Date/Time: 5/28/2026 4:00 PM Closing Date/Time: 6/10/2026 10:00 AM Submittal Information: send to Lisa Leben lleben@clearcreekcounty.us Contact Person: Lisa Leben: lleben@clearcreekcounty.us

Commodity Codes

• NAICS 332994Small Arms, Ordnance, and Ordnance Accessories Manufacturing

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.