Project Information

Bid Title

Fuel Tank and Dispensing Infrastructure Replacement

Issuing Agency

Ohio Facility Construction Commission

Location

Ohio

Published Date

Jan 8, 2026

Closing Date

Jan 15, 2026

Government Level

State & Local

Status

Closed

Ref. #

OSU-260081 (REVISED)

Original Source

Join to Access Full Details

Bid Inquiries

Join to Access Full Details

Bid Documents

Join to Access Full Details

Project Description

Publish Date	Due Date	Number	Owner	Contractring Authority	Project Name	Primary Service	Estimated Project Cost	Q&A	Short List	Notes
12/17/2025	1/15/2026	OSU-260081 (REVISED)	The Ohio State University	Local Higher Education	Fuel Tank and Dispensing Infrastructure Replacement	A/E	$2,000,000	N/A	TBD

Attachment Preview

Request for Qualifications (Registered Design Professional*)

State of Ohio Standard Forms and Documents

Administration of Project: Local Higher Education

Fuel Tank and Dispensing Infrastructure

Project Name Replacement

Project Location

City / County Columbus / Franklin

Owner

The Ohio State University

Delivery Method General Contracting

No. of paper copies requested (stapled, not bound)

0

Response Deadline 01/15/2026

2:00 PM local time

Project Number

OSU-260081

Project Manager

Dan Sayer

Contracting Authority Local Higher Education

Prevailing Wages State

No. of electronic copies requested (PDF)

1

* “Registered Design Professional includes any architect holding a certificate issued under section 4703.10 of the Revised

Code, any landscape architect holding a certificate issued under section 4703.36 of the Revised Code, or any engineer

holding a certificate issued under section 4733.14 of the Revised Code.” (Ohio Building Code section 4101:1-2-01 Definitions)

Submit the Statements of Qualifications (Form F110-330) via email to 330Submittals@osu.edu. In the subject line, include the

project number and name for RFQ you are responding to. See Section J of this RFQ for additional submittal instructions.

Submit all questions regarding this RFQ in writing to Dan Sayer at sayer.38@osu.edu with the project number included in the

subject line (no phone calls please). Questions will be answered and posted to the Opportunities page on the OFCC website

at https://ofcc.ohio.gov on a regular basis until one week before the response deadline. The name of the party submitting a

question will not be included on the Q&A document.

Project Overview

A. Project Description

Ohio State’s Transportation and Traffic Management division has three 10,000-gallon underground fuel tanks (one diesel

and two gasoline) at the refueling facility. All three of these tanks have reached end of life and need to be replaced. Other

associated equipment will need to be replaced including underground pumps, waste oil tank, fuel dispensers & controllers,

and tank monitoring system.

This project will not seek LEED certification. There are no BIM requirements on this project. LEED and BIM scores will

be zeros on the A/E selection rating form.

This project includes asset tagging. The Primary firm submitting for the project is required to have the expertise capable of

meeting this prerequisite and is responsible to support their consultants to meet this requirement. The Asset Tagging

Process Diagram, Asset Worksheet Template, and LOD Matrix can be accessed via the OSU FOD website

(https://fod.osu.edu/resources) under Design Guidelines, Specifications, Standards; Specifications and Standards;

Building Information Modeling (BIM).

B. Scope of Services

The project and construction budget as listed in this RFQ is estimated.

For projects advertised with an appropriately developed Program of Requirements (POR), upon award of the Agreement,

commence with Design. For projects without such a POR, upon award of the Agreement, commence by developing the

Program of Requirements.

The project shall follow the applicable University Sustainability Standards: https://fod.osu.edu/sites/default/files/div_18.pdf.

The selected A/E, as a portion of its required Scope of Services and prior to submitting its proposals, will discuss and

clarify with the Owner and/or the Contracting Authority, the cost breakdown of the Architect/Engineer Agreement detailed

cost components to address the Owner’s project requirements. Participate in the Encouraging Growth, Diversity & Equity

(EDGE) Program as required by statute and the Agreement. Required Professional Liability Insurance will be per Exhibit A

– A/E Terms and Conditions Article 7.2.6.

As required by the Agreement, and as properly authorized, provide the following categories of services: Program

Verification, Schematic Design, Design Development, Construction Document Preparation, Bid and Award Support,

Conformed Documents, Construction Administration, Post-Construction, and Additional Services of all types.

F110-02-2024-OCT

Publish Date: [leave blank]

Page 1 of 5

Request for Qualifications (Registered Design Professional) continued

Refer to the Ohio Facilities Construction Manual for additional information about the type and extent of services required

for each. A copy of the standard Agreement can be obtained at the OFCC website at https://ofcc.ohio.gov.

The selected A/E will be required to sign the standard agreement. No modifications to the requirements in the agreement

will be accepted.

During the construction period, provide not less than 8 hours (excluding travel time) on-site construction administration

services each week, including (1) attendance at progress meetings, (2) a written field report of each site visit, (3) on-site

representation comprised of the A/E and its consultant staff involved in the primary design of the project, all having

relevant and appropriate types of construction administration experience.

The project team (Owner / A/E / Contractor) will be required to utilize the University’s Project Management System, for all

compatible services required by the University.

The Ohio State University is dedicated to providing a safe and healthy environment for students, patients, staff, visitors,

and contractors. While not exclusive, guidelines governing safety expectations for construction/ renovation projects within

Ohio State buildings are set forth in the Building Design Standards Appendix V and are summarized here:

https://fod.osu.edu/resources, under the section titled “Construction Site Safety Requirements.”

Closeout Services: The closeout for this project is required to be delivered in an electronic cloud-based format using the

e-Builder Project Management System and adhere to The Ohio State University Project Closeout Standards. The Ohio

State University Project Closeout Standards can be accessed via the OSU FOD vender resource website

(https://fod.osu.edu/resources) under Post Construction / Close Out.

For purposes of completing the Relevant Project Experience Matrix in Section F of the Statement of Qualifications (Form

F110-330), below is a list of relevant scope of work requirements for this RFQ:

1. Experience with underground storage tank design & installation

2. Compliance with fuel center environmental regulations and permitting

3. Lead construction administration services for OSU administered projects

4. Cost estimating – Final costs within 5% of estimate

For the purpose of the selection of 10 Relevant Projects in Section F of the Statement of Qualification (Form F110-330),

projects must be designed by the Lead Firm.

C. Estimated Budget / Funding

State Funding:

n/a

Other Funding:

n/a

Construction Cost: $1,500,000

Total Project Cost: $2,000,000

D. Anticipated Schedule

Professional Services Start:

Construction Notice to Proceed:

Substantial Completion of all Work:

Professional Services Completed:

01 / 26

06 / 26

10 / 26

11 / 26

E. Estimated Basic Fee Range (see note below)

F. EDGE Participation Goal

8% to 8.5%

Percent of initial Total A/E Fee:

5%

NOTE: Basic Services include: (1) Program Verification, (2) Schematic Design, (3) Design Development, (4) Construction Documents,

(5) Bidding and Award OR GMP Proposal and Amendment (as applicable), (6) Construction Administration, and (7) Closeout services. The

Basic Fee includes all professional design services and consultant services necessary for proper completion of the Basic Services, including

validation of existing conditions (but not subsurface or hidden conditions) and preparation of cost estimates and design schedules for the

project. The Estimated Basic Fee Range is calculated as a percentage of the Estimated Budget for Construction Cost above. The Basic

Fee excludes any Additional Services required for the project.

G. Basic Service Providers Required (see note below)

Lead A/E Discipline: Civil Engineering

Secondary

Environmental Engineering

Disciplines:

MEP Engineering

H. Additional Service Providers Required

Hazardous Materials Assessment

Geotechnical Services

Surveying

F110-02-2024-NOV

Publish Date: [leave blank]

Page 2 of 5

Request for Qualifications (Registered Design Professional) continued

NOTE: The lead A/E shall be (1) any architect holding a certificate issued under section 4703.10 of the Revised Code, (2) any landscape

architect holding a certificate issued under section 4703.36 of the Revised Code, or (3) any engineer holding a certificate issued under section

4733.14 of the Revised Code.

I. Evaluation Criteria for Selection

• Demonstrated ability to meet Owner’s programmed project vision, scope, budget, and schedule on previous

projects.

• Demonstrated ability to meet Owner’s Sustainability Standards: https://fod.osu.edu/sites/default/files/div_18.pdf.

• Previous experience compatible with the proposed project (e.g., type, size).

• Relevant past work of prospective firm’s proposed consultants.

• Past performance of prospective firm and its proposed consultants.

• Qualifications and experience of individuals directly involved with the project.

• Proposer’s previous experience (numbers of projects, sizes of projects) when working with its proposed

consultants.

• Design quality and demonstrated ability of prospective firm and its proposed consultants to provide design

services which represent the University’s Design Guidelines for Buildings and Landscape buildings-

landscape.pdf

• Specification writing credentials and experience.

• Experience and capabilities of creating or using Critical Path Method (CPM) schedules and of using CPM

schedules as a project management resource.

• Approach to and success of using partnering and Alternative Dispute Resolution.

• Proximity of prospective firms to the project site.

• Proposer’s apparent resources and capacity to meet the needs of this project.

• The selected A/E and all its consultants must have the capability to use the Internet within their normal business

location(s) during normal business hours.

Interested A/E firms are required to submit the Commitment to Participate in the EDGE Business Assistance Program

form in its Statement of Qualifications (Form F110-330) submitted in response to the RFQ, to indicate its intent to contract

with and use EDGE-certified Business Enterprise(s), as a part of the A/E’s team. The Intent to Contract and to Perform

and / or waiver request letter and Demonstration of Good Faith Effort form(s) with complete documentation must be

attached to the A/E’s Technical Proposal. Both forms can be accessed via the OFCC website at https://ofcc.ohio.gov. The

Intent to Contract and to Perform form is again required at the Fee Proposal stage.

If the A/E firm intends to receive points for exceeding the EDGE Participation Goal, it must provide BOTH a

completed Commitment to Participate form AND a completed Statement of Intent to Contract and to Perform forms

signed by both parties with its Statement of Qualifications.

For all Statements of Qualifications, please identify the EDGE-certified Business Enterprises, by name, which will

participate in the delivery of the proposed professional services solicited in the RFQ.

Interested A/E firms must indicate on their Statement of Qualifications, the locations where their services will be

performed in the spaces provided or by attachment in accordance with the requirements of Executive Order 2019-12D

related to providing services only within the United States and the requirements of Executive Order 2022-02D prohibiting

purchases from or investment in any Russian institution or company. Failure to do so may cause their Statement of

Qualifications to be rejected.

J. Submittal Instructions

Firms are required to submit the current version of Statement of Qualifications (Form F110-330) available via the OFCC

website at https://ofcc.ohio.gov.

Electronic submittals should be combined into one PDF file saved with the form name, project number listed on the RFQ

and your firm’s name (ex. F110-330_OSU-nnnnnn_Firm Name). Use the “print” feature of Adobe Acrobat or similar

software for creating a PDF rather than using a scanner. If possible, please reduce the file size of the PDF. In Acrobat, go

to Advanced, then PDF Optimizer.

Statements of Qualifications must be submitted electronically by email. Submittals are limited to one email with a

maximum file size of 25 MB.

Firms are requested to identify professional registrations, memberships, and credentials including: LEED GA, LEED AP,

LEED AP+, CCCA, CCM, CCS, CDT, CPE, DBIA, and any other appropriate design and construction industry credentials.

Identify that information on the resume page for individual in Block 22, Section E of the F110-330 form.

F110-02-2024-NOV

Publish Date: [leave blank]

Page 3 of 5

Architect / Engineer Selection Rating Form

State of Ohio Standard Forms and Documents

Fuel Tank and Dispensing Infrastructure

Project Name Replacement

Project Number OSU-260081

Proposer Firm

City, State, Zip

Selection Criteria

1. Primary Firm Location, Workload and Size (Maximum 10 points)

a. Proximity of firm to project site

b. Amount of fees awarded by Contracting Authority in

previous 24 months

c. Number of licensed professionals

Less than 150 miles

150 miles to 200 miles

More than 200 miles

Less than $200,000

$200,000 to $1,000,000

More than $1,000,000

Less than 2 professionals

2 to 10 professionals

More than 10 professionals

2. Primary Firm Qualifications (Maximum 30 points)

a. Project management lead

b. Project design lead

c. Technical staff

d. Construction administration staff

Experience / ability of project manager to

manage scope / budget / schedule / quality

Experience / creativity of project designer to

achieve owner’s vision and requirements

Experience / ability of technical staff to create

fully coordinated construction documents

Experience / ability of field representative to

identify and solve issues during construction

3. Key Consultant Qualifications (Maximum 20 points)

a. Key discipline leads

b. Proposed EDGE-certified Consultant participation*

Experience / ability of key consultants to

perform effectively and collaboratively

One point for every 2 percent increase in

professional services over the EDGE

participation goal

4. Overall Team Qualifications (Maximum 10 points)

a. Previous team collaboration

b. OSU Sustainability Standards or LEED** project

experience

c. BIM project experience

d. Team organization

Less than 2 sample projects

2 to 4 sample projects

More than 4 sample projects

LEED v4.0 or v4.1 projects

OSU Sustainability Standards projects

Training and knowledge

Direct project experience

Clarity of responsibility / communication

demonstrated by table of organization

5. Overall Team Experience (Maximum 30 points)

a. Previous team performance

b. Experience with similar projects / delivery methods

c. Budget and schedule management

d. Knowledge of Ohio Capital Improvements process

Past performance as indicated by

evaluations and letters of reference

Less than 3 projects

3 to 6 projects

More than 6 projects

Performance in completing projects within

original construction budget and schedule

Less than 3 projects

3 to 6 projects

More than 6 projects

Value

5

2

0

2

1

0

1

2

3

Max

=3

0 - 10

0 -5

0-5

0 - 10

Max

= 20

0 - 15

0-5

1

3

5

Max

=5

0

Max

2

=2

0

Max

0

=0

0-3

0 - 10

0-3

4-6

7 - 10

0-5

0-1

2-3

4-5

Score

* Must be comprised of professional design services consulting firm(s) and NOT the lead firm – For more

information on scoring this and other criteria refer to Document F199-01 – PS Selection Rating Rubric.

** Leadership in Energy & Environmental Design administered by Green Building Certification Inc.

Notes:

Evaluator:

Name

Subtotal

F110-02-2024-OCT

Signature

Date

Publish Date: [leave blank]

Page 4 of 5

Request for Qualifications (Registered Design Professional) continued

F110-02-2024-NOV

Publish Date: [leave blank]

Page 5 of 5

Commodity Codes

• NAICS 237120Oil and Gas Pipeline and Related Structures Construction
• NAICS 332420Metal Tank (Heavy Gauge) Manufacturing

* Disclaimer: Government BidHub provides information on bids, RFPs (Requests for Proposals), and RFQs (Requests for Qualifications) solely for convenience and informational purposes. This site is not an official public notice board. For official details, responses, or inquiries, please contact the relevant government agency directly.